Process Capability Indices—A Review, 1992–2000

References and Bibliography

• Adler, YA. and Shper, V. (1994). “Some Remarks on Bayesian Approach to Process Capability Estimates”. 5th International Meeting on Bayesian Statistics, Alicante, Spain.
   Google Scholar
• Ahmed, S. E. (1998). “Test and Confidence Intervals for Process Capability Indices in k Arbitrary Populations”. Department of Mathematical Statistics, University of Regina, Saskatchewan, Canada.
   Google Scholar
• Ahmed, S. E. and Rohbar, M. H. (1997). “Inference Concerning a Process Capability Index”. Masters Thesis. Department of Mathematical Statistics, University of Regina, Saskatchewan, Canada.
   Google Scholar
• Annis, C. (2001). “Review of Statistical Distributions in Engineering by Karl Bury”. Technometrics, 43, pp. 101–102.
   Google Scholar
• Bai, D. S. and Choi, S. S. (1997). “Process Capability Indices for Skewed Populations”. Masters Thesis. Department of Industrial Engineering, Advanced Institute of Science and Technology, Taejon, South Korea.
   Google Scholar
• Bailey, S. P. (1995). “How to Deal With Process Capability – ‘Catch-22’”. Transactions of the ASQC Technical Conference, pp. 1105–1116.
   Google Scholar
• Barnes, R. and Pierce, R. C. (1997). “Inference and Capability Indexes”. Proceedings of the ASA Section on Quality and Productivity, pp. 101–102.
   Google Scholar
• Beck, C. and Ester, S. (1998). “Multicriteria Capability Indexes”. Spektrum 24, pp. 179–187.
   Google Scholar
• Berardo, J. M. and Irony, T. X. (1996). “A General Multivariate Bayesian Process Capability Index”. Statistician 45, pp. 487–502.
   Google Scholar
• Bissell, A. F. (1990). “How Reliable is Your Capability Index?”. Applied Statistics 39, pp. 331–340.
   Web of Science ®Google Scholar
• Bittanti, S.; Lovera, M.; and Moiraghi, L. (1998). “Application of Non-Normal Process Capability Indices to Semi-Conductor Quality Control”. IEEE Transactions on Semiconductor Manufacturing 11, pp. 296–302.
   Web of Science ®Google Scholar
• Borges, W. and Ho, L. L. (1998). “A Fraction Non-Conforming Based Capability Index”. Department di Estadistics, Universidede de Sao Paulo, Brazil.
   Google Scholar
• Borges, W. and Ho, L. L. (2000). “On the Sampling Distribution of Clements' Capability Index”. Communications in Statistics—Simulation and Computation 29, pp. 121–138.
   Web of Science ®Google Scholar
• Bothe, D. R. (1992). “A Capability Study for an Entire Product”. Transactions of the ASQC Technical Conference, pp. 171–178.
   Google Scholar
• Bothe, D. R. (1997). Measuring Process Capability. McGraw-Hill, New York, NY.
   Google Scholar
• Bothe, D. R. (1999). “A Capability Index for Multiple Process Streams”. Quality Engineering 11, pp. 613–618.
   Google Scholar
• Boyles, R. A. (1991). “The Taguchi Capability Index”. Journal of Quality Technology 23, pp. 17–26.
   Web of Science ®Google Scholar
• Boyles, R. A. (1994). “Process Capability With Asymmetric Tolerances”. Communications in Statistics—Simulation and Computation 23, pp. 613–643.
   Web of Science ®Google Scholar
• Boyles, R. A. (1996a). “Exploratory Capability Analysis”. Journal of Quality Technology 28, pp. 91–98.
   Google Scholar
• Boyles, R. A. (1996b). “Multivariate Process Analysis With Lattice Data”. Technometrics 38, pp. 37–49.
   Google Scholar
• Carr, W. E. (1991). “A New Process Capability Index: Parts per Million”. Quality Progress 24, p. 152.
   Google Scholar
• Castagliola, P. (1996). “Evaluation of Non-Normal Process Capability Indices Using Burr's Distribution”. Quality Engineering 8, pp. 587–593.
   Google Scholar
• Chan, L. K.; Cheng, S. W.; and Spiring, F. A. (1988a). “The Robustness of Process Capability Index Cp to Departures from Normality” in Statistical Theory and Data Analysis, edited by K. Matusita. North Holland, Amsterdam, Netherlands.
   Google Scholar
• Chan, L. K.; Cheng, S. W.; and Spiring, F. A. (1988b). “A New Measure of Process Capability, Cpm“. Journal of Quality Technology 20, pp. 162–175.
   Google Scholar
• Chan, L. K.; Cheng, S. W.; and Spiring, F. A. (1991). “A Multivariate Measure of Process Capability”. International Journal of Modeling and Simulation 11, pp. 1–6.
   Google Scholar
• Chan, L. K. and Mak, T. K. (1993). “A Process Capability Indicator”. Total Quality Management 4, pp. 33–45.
   Google Scholar
• Chan, L. K.; Xiong, Z.; and Zhang, D. (1990). “On the Asymptotic Distribution of Some Process Capability Indices”. Communications in Statistics—Theory and Methods 19, pp. 11–18.
   Web of Science ®Google Scholar
• Chen, H. (1994). “A Multivariate Process Capability Index Over a Rectangular Solid Tolerance Zone”. Statistica Sinica 4, pp. 749–758.
   Web of Science ®Google Scholar
• Chen, H. F. (1997). “Asymptotic Analysis of a Class of Process Capability Indices”. Statistics 20, pp. 149–162.
   Web of Science ®Google Scholar
• Chen, H. F. and Kotz, S. (1996). “An Asymptotic Distribution of Wright's Process Capability Index Sensitive to Skewness”. Journal of Statistical Computation and Simulation 55, pp. 147–158.
   Web of Science ®Google Scholar
• Chen, K. S. (1998a). “Incapability Index with Asymmetric Tolerances”. Statistica Sinica 8, pp. 253–262.
   Google Scholar
• Chen, K. S. (1998b). “Estimation of the Process Incapability Index”. Communications in Statistics—Theory and Methods 27, pp. 1263–1274.
   Google Scholar
• Chen, S. M. (1996). “Response to the ‘Letter to the Editor’”. Communications in Statistics—Theory and Methods 25, pp. 1407–1408.
   Web of Science ®Google Scholar
• Chen, S. M. and Hsu, N. F. (1995). “The Asymptotic Distribution of the Process Capability Index Cpmk“. Communications in Statistics—Theory and Methods 24, pp. 1279–1291. (Erratum 25, pp. 1117–1119).
   Web of Science ®Google Scholar
• Chen, S. M. and Hsu, Y. S. (1998a). “Asymptotic Distribution of C_p(a,b) Based on Second Order Stationary Process”. Preprint.
   Google Scholar
• Chen, S. M. and Hsu, Y. S. (1998b). “Asymptotic Distribution of Estimators of the Vännman-type Indices Based on m-Dependent Stationary Processes”. Preprint.
   Google Scholar
• Chen, S. M. and Pearn, W. L. (1997). “The Asymptotic Distribution of the Estimated Process Capability Index Cpk“. Communications in Statistics—Theory and Methods 26, pp. 2489–2497.
   Web of Science ®Google Scholar
• Cheng, S. W. (1994/5). “Practical Implementation of the Process Capability Indices”. Quality Engineering 7, pp. 239–259.
   Google Scholar
• Choi, B. C. and Owen, D. B. (1990). “A Study of a New Process Capability Index”. Communications in Statistics—Theory and Methods 19, pp. 1231–1245.
   Web of Science ®Google Scholar
• Chou, Y. M. and Anderson, M. T. (1997). “Sequential Test of Some Process Capability Indices” in Statistics of Quality. Marcel-Dekker, New York, NY, pp. 31–37.
   Google Scholar
• Chou, Y. M.; Owen, D. B.; and Borrego, A. S. A. (1990). “Lower Confidence Limits on Process Capability Indices”. Journal of Quality Technology 22, pp. 223–229.
   Web of Science ®Google Scholar
• Chou, Y. M. and Polansky, A. M. (1993). “Power of Tests for Some Process Capability Indices”. Communications in Statistics—Simulation and Computation 22, pp. 523–544.
   Web of Science ®Google Scholar
• Christofferson, J. (1999). “Process Capability Indices and Block Bootstrap for Serially Correlated Data”. Research Report 1999:4, Division of Quality Technology and Statistics, Luleå University of Technology, Luleå, Sweden.
   Google Scholar
• Clements, J. A. (1989). “Process Capability Calculations for Non-Normal Distributions”. Quality Progress 22, pp. 95–100.
   Google Scholar
• Collins, A. J. (1995). “Bootstrap Confidence Limits on Process Capability Indices”. The Statistician 44, pp. 373–378.
   Google Scholar
• Crain, C. R. (1993). “Process Capability Indices and Customer-Supplier Relations”. Proceedings of the ASA Section on Quality and Productivity, pp. 156–158.
   Google Scholar
• Davis, R. D.; Kaminsky, F. C.; and Saboo, S. (1992). “Process Capability Analysis for Processes With Either a Circular or a Spherical Tolerance Zone”. Quality Engineering 5, pp. 41–54.
   Google Scholar
• Delermo, M. (1997). “A Strategy for Mastering Variation”. Transactions of the ASQC Technical Conference, pp. 760–768.
   Google Scholar
• Deleryd, M. (1998a). “Enhancing the Industrial Use of Process Capability Studies”. Doctoral Thesis, Luleå University of Technology, Luleå, Sweden.
   Google Scholar
• Deleryd, M. (1998b). “On the Gap Between Theory and Practice of Process Capability Studies”. International Journal of Quality, Reliability and Management 15, pp. 178–191.
   Google Scholar
• Deleryd, M. (1999a). “A Pragmatic View on Process Capability Studies”. International Journal of Production Economics 58, pp. 319–330.
   Google Scholar
• Deleryd, M. (1999b). “The Effect of Skewness on Estimates of Some Process Capability Indices”. International Journal of Applied Quality Management 2, pp. 153–186.
   Google Scholar
• Deleryd, M.; Deltin, J.; and Klefsjö, B. (1999). “Critical Factors for Successful Implementation of Process Capability Studies”. Quality Management Journal 6, pp. 40–59.
   Google Scholar
• Deleryd, M. and Vännman, K. (1998). “Process Capability Studies for Short Production Runs”. International Journal of Reliability, Quality and Safety Engineering 5, pp. 353–401.
   Google Scholar
• Deleryd, M. and Vännman, K. (1999). “Process Capability Plots—A Quality Improvement Tool”. Quality and Reliability Engineering International 15, pp. 213–227.
   Web of Science ®Google Scholar
• Dumitrescu, M. E. and Hubele, N. F. (1999). “An Entropic Framework for the Normal Distribution in Capability Analysis”. Communications in Statistics—Theory and Methods 28, pp. 1361–1377.
   Web of Science ®Google Scholar
• Elwady, K.; Schaper, D.; and Kailath, T. (1996). “Improvements in Cpk Using Real-Time Feedback Control”. IEEE Transactions on Semiconductor Manufacturing 9, pp. 87–94.
   Web of Science ®Google Scholar
• Faddoul, N. R.; English, J. R.; and Taylor, C. D. (1996). “The Impact of Mixture Distributions in Classical Process Capability Analysis”. IEEE Transactions on Reliability 28, pp. 957–966.
   Google Scholar
• Farnum, N. R. (1996/7). “Using Johnson Curves to Describe Non-Normal Process Data”. Quality Engineering 9, pp. 329–336.
   Google Scholar
• Fink, J. and Wolff, H. (1995). “A New Approach for Describing and Controlling Process Capability”. Proceedings of the 5th International Workshop on Intelligent Statistical Quality Control, Osaka, Japan, pp. 1–25.
   Google Scholar
• Finley, J. C. (1992). “What is Capability?—or—What is Cp and Cpk?”. Transactions of the ASQC Technical Conference, pp. 186–192.
   Google Scholar
• Flaig, J. J. (1992). “Issues Related to Capability Indices” in Process Capability Analysis Software Manual, Section 6, Applied Technology, San Jose, CA.
   Google Scholar
• Flaig, J. J. (1996/7). “A New Approach to Process Capability Indices”. Quality Engineering 9, pp. 200–211.
   Google Scholar
• Flaig, J. J. (1999). “Process Capability Sensitivity Analysis”. Quality Engineering 11, pp. 587–592.
   Google Scholar
• Flaig, J. J. (2000). “Issues Related to Capability Indices” in Process Capability Analysis Software Analysis, Section 6, Applied Technology, San Jose, CA.
   Google Scholar
• Flaig, J. J. and Spencer, W. N. (2000). “Process Qualification Using Risk Analysis”. Masters Thesis, Personal Communication.
   Google Scholar
• Franklin, L. A. (1995). “Improved Sample Size Determination Formula for Lower Confidence Limits for Cp and Cpk“. Proceedings of the ASA Section on Quality and Productivity, pp. 55–58.
   Google Scholar
• Franklin, L. A.; Cooley, B. J.; and Elrod, G. (1999). “Comparing the Importance of Variation and Mean of a Distribution”. Quality Progress 32, pp. 90–94.
   Google Scholar
• Franklin, L. A. and Wasserman, G. S. (1992). “Bootstrap Lower Confidence Limits for Capability Indices”. Journal of Quality Technology 24, pp. 196–210
   Web of Science ®Google Scholar
• Franklin, L. A. and Wasserman, G. S. (1994). “Bootstrap Lower Confidence Limits Estimates for Cjkp (the new Flexible Capability Index)”. Pakistan Journal of Statistics 10A, pp. 33–45.
   Google Scholar
• Gabel, S. H. (1990). “Process Performance Chart”. ASQC Quality Congress Transactions, San Francisco, CA, pp. 683–688.
   Google Scholar
• Goodman, J. H. (1996). “Assessing Measurement Capability for Destructive and Nonrepeatable Tests”. Proceedings of the ASA Section on Physical and Engineering Sciences, pp. 87–92.
   Google Scholar
• Greenwich, M. and Jahr-Shaffroth, B. (1995). “A Process Incapability Index”. International Journal of Quality, Reliability and Management 12, pp. 58–71.
   Google Scholar
• Grünlund, U. (1990). “The Concept of Capability Index: Assumptions and Conclusions”. Research Report 1990:2, Division of Quality and Technology, Luleå University of Technology, Luleå, Sweden.
   Google Scholar
• Guirgurs, G. H. and Rodriguez, R. N. (1992). “Computation of Owen's Q Function Applied to Process Capability Analysis”. Journal of Quality Technology 24, pp. 236–246.
   Web of Science ®Google Scholar
• Gunter, B. (1989 a,b,c,d). “The Use and Abuse of Cpk, Parts 1–4”. Quality Progress 22, (1) pp. 72–73; (3) pp. 108–109; (5) pp. 79–80; (7) pp. 86–87.
   Google Scholar
• Gunter, B. (1991 a,b,c,d,e). “Process Capability Studies, Parts 1–5”. Quality Progress 24, (2) pp. 97–100; (4) pp. 102–106; (6) pp. 77–85; (8) pp. 123–132; (10) pp. 109–113.
   Google Scholar
• Gupta, A. K. and Kotz, S. (1997). “A New Process Capability Index”. Metrika 45, pp. 213–224.
   Web of Science ®Google Scholar
• Hallin, M. and Seoh, M. (1999). “When Does Edgeworth Beat Berry and Essen? Numerical Evaluation of Edgeworth Expansion”. Journal of Statistical Planning and Inference 63, pp. 19–38.
   Web of Science ®Google Scholar
• Han, J. H.; Cho, J.-J.; and Leem, C. S. (2000). “Bootstrap Confidence Limits for Wright's Cs“. Communications in Statistics—Theory and Methods 29, pp. 485–505.
   Web of Science ®Google Scholar
• Hellmich, M. and Wolff, H. (1996). “A New Approach for Describing and Controlling Process Capability for a Multivariate Process”. Proceedings of the ASA Section on Quality and Productivity, pp. 44–48.
   Google Scholar
• Herman, J. T. (1989). “Capability Index—Enough for Process Industries?” Transactions of the ASQC Quality Congress, Toronto, pp. 670–675.
   Google Scholar
• Hoffman, L. L. (1999). “Hypothesis Testing of C_p“. Department of Statistics, University of Central Florida, Orlando, FL.
   Google Scholar
• Holmes, D. (1980). “A Quality Portfolio Management Chart”. Stochas Inc., Schenectady, New York (Also in (1986). Quality 25, p. 67).
   Google Scholar
• Hsiang, T. C. and Taguchi, G. (1985). “Tutorial on Quality Control and Assurance—The Taguchi Methods”. Joint Meetings of the American Statistical Association, Las Vegas, Nevada, pp. 188.
   Google Scholar
• Huang, D.-Y. and Lee, R. F. (1995). “Selecting the Largest Capability Index from Several Quality Control Processes”. Journal of Statistical Planning and Inference 40, pp. 335–346.
   Web of Science ®Google Scholar
• Hubele, N. F.; Beaumariage, T.; Bawaja, G.; Hong, S. C.; and Chu, R. (1994). “Using Experimental Design to Assess Capability of a System”. Journal of Quality Technology 26, pp. 1–11.
   Web of Science ®Google Scholar
• Hubele, N. F.; Shahriari, H.; and Cheng, C. S. (1991). “A Bivariate Process Capability Vector” in Statistical Process Control in Manufacturing edited by J. B. Keats and D. C. Montgomery. Marcel Dekker, New York, NY, pp. 299–310.
   Google Scholar
• Hubele, N. F. and Zimmer, L. S. (1994). “Average Run Lengths for a Cpm Control Chart”. Transactions of the ASQC Technical Conference, pp. 577–581.
   Google Scholar
• Hulting, F. L. (1993). “Process Capability Analysis with Geometric Tolerances”. Proceedings of the ASA Section on Quality and Productivity, pp. 266–270.
   Google Scholar
• Jessenberger, J. and Weihs, C. (2000). “A Note on the Behavior of Cpmk With Asymmetric Specification Limits”. Journal of Quality Technology 32, pp. 440–443.
   Web of Science ®Google Scholar
• Johnson, N. L. (1996). “Letter to the Editor”. Communications in Statistics —Theory and Methods 25, p. 1405.
   Web of Science ®Google Scholar
• Johnson, N. L.; Kotz, S.; and Pearn, W. L. (1994). “Flexible Process Capability Indices”. Pakistan Journal of Statistics 10, pp. 23–31.
   Google Scholar
• Johnson, T. (1992). “The Relationship of Cpm to Squared Error Loss”. Journal of Quality Technology 24, pp. 211–215.
   Web of Science ®Google Scholar
• Juran, J. M. (1974). Juran's Quality Control Handbook, 3rd ed. McGraw-Hill, New York, N.Y.
   Google Scholar
• Kalyanasundaram, M. and Balamurali, S. (1997). “A Superstructure Capability Index for Short Run Production Processes and Its Bootstrap Lower Confidence Limits”. Economics of Quality Control 12, pp. 85–93.
   Google Scholar
• Kaminski, F. C.; Dovich, R. A.; and Burke, R. J.; (1998). “Process Capability Indices: Now and in the Future”. Quality Engineering 10, pp. 445–453.
   Google Scholar
• Kane, V. E. (1986). “Process Capability Indices”. Journal of Quality Technology 18, pp. 41–52.
   Web of Science ®Google Scholar
• Karl, D. P.; Morisette, J. and Taams, W. (1994). “Some Applications of a Multivariate Capability Index in Geometric Dimensioning and Tolerancing”. Quality Engineering 6, pp. 649–665.
   Google Scholar
• Kazmerski, T. J. (1995). Statistical Problem Solving in Quality Engineering. McGraw-Hill, New York, N.Y.
   Google Scholar
• Kirmani, S.N.U.A.; Kocherlakota, K. and Kocherlakota, S. (1991). “Estimation of σ and the Process Capability Index Based on Sub-Samples”. Communications in Statistics—Theory and Methods 30, pp. 275–291.
   Web of Science ®Google Scholar
• Kocherlakota, S. (1992). “Process Capability Index—Recent Developments”. Sankhyā B 54, pp. 352–369.
   Google Scholar
• Kocherlakota, S. and Kocherlakota, K. (1994). “Confidence Intervals for the Process Capability Ratio Based on Robust Estimators”. Communications in Statistics—Theory and Methods 23, pp. 257–276.
   Google Scholar
• Kotz, S. and Johnson, N. L. (1993a). Process Capability Indices. Chapman and Hall, London, U.K.
   Google Scholar
• Kotz, S. and Johnson, N. L. (1993b). “Process Capability Indices for Non-Normal Populations”. International Journal of Mathematical Statistical Science 1, pp. 35–44.
   Google Scholar
• Kotz, S. and Johnson, N. L. (1999). “Delicate Relations Among the Basic Process Capability Indices Cp, Cpk, and Cpm, and Their Modifications”. Communications in Statistics—Theory and Methods 26, pp. 849–861.
   Google Scholar
• Kotz, S. and Lovelace, C. (1998). Introduction to Process Capability Indices. Arnold, London, U.K.
   Google Scholar
• Kotz, S.; Pearn, W. L.; and Johnson, N. L. (1993). “Some Process Capability Indices are More Reliable Than One Might Think”. Applied Statistics 42, pp. 55–62.
   Web of Science ®Google Scholar
• Kunjurananthram, S. (2001). “A Comparative Analysis of Confidence Interval Construction and Hypothesis Testing Procedures for C_pm“. Master's Thesis, Department of Industrial Engineering, Arizona State University, Tempe, AZ.
   Google Scholar
• Kushler, R. H. and Hurley, P. (1992). “Confidence Bounds for Capability Indices”. Journal of Quality Technology 24, pp. 188–196.
   Web of Science ®Google Scholar
• Lehrman, K. H. (1992/2). “Capability Analysis and Index Interval Estimates: Quantitative Characteristics (Variables)”. Quality Engineering 4, pp. 93–129.
   Google Scholar
• Leung, B., Young, A.; and Spiring, F. A. (1997). “The Robustness of Cpm to Departures from Normality”. Technical Report No. 010397, Department of Applied Mathematics, Hong Kong Polytechnical University, China.
   Google Scholar
• Levinson, W. A. (1997). “Approximate Confidence Limits for Cpk and Confidence Limits for Non-Normal Process Capabilities”. Quality Engineering 9, pp. 635–640.
   Google Scholar
• Li, H.; Owen, D. B.; and Borrego, A. S. A. (1990). “Lower Confidence Limits on Process Capability Indices Based on Range”. Communications in Statistics—Simulation and Computation 19, pp. 1–24.
   Web of Science ®Google Scholar
• Li, Y. and Lin, C. (1996). “Multivariate Cp Value”. Chinese Journal of Applied Probability and Statistics 12, pp. 132–138.
   Google Scholar
• Littig, S. J. and Lam, C. T. (1993). “Case Studies in Process Capability Measurement”. Transactions of the ASQC Technical Conference, pp. 569–576.
   Google Scholar
• Little, T. A. and Harrelson, C. S. (1993). “Short Run Capability Assessment Using the t-Distribution”. Transactions of the ASQC Quality Congress, Boston, MA., pp. 181–191.
   Google Scholar
• Lovera, C.; Moiraghi, L.; Montefusco, A.; and Valentini, D. (1997). “Estimation of Industrial Process Capabilities: Some Proposals and Studies to Overcome the Obstacle of Non-Normal Distributions”. Abstract III, National Congress, SIMAI, Pavia, Italy, pp. 627–631.
   Google Scholar
• Luceño, C. (1996). “A Process Capability Index with Reliable Confidence Intervals”. Communications in Statistics—Simulation and Computation 25, pp. 235–245.
   Web of Science ®Google Scholar
• Luceño, C. (1999). “Discrete Approximations to Continuous Univariate Distributions—an Alternative to Simulation”. Journal of the Royal Statistical Society B 61, pp. 345–352.
   Google Scholar
• Mackerlich, N. A. and Stephan, V. (1997). “Capability Index for Nonnormal Processes”. Transactions of the ASQC Technical Conference, pp. 769–773.
   Google Scholar
• Marcucci, M. O. and Beazley, C. C. (1988). “Capability Indices: Process/Performance Measures”. Transactions of the ASQC Quality Congress, pp. 516–528.
   Google Scholar
• Mazzuchi, T. (1997). “Notes on Cp and Cpk Estimation”. Report, School of Engineering, George Washington University, Washington, D.C.
   Google Scholar
• McCormick, D. W.; Hurwitz, A. M.; Sprague, P. D.; and Harris, I. R. (1996). “Capability Indices for Non-Normal Data”. Proceedings of the ASA Section on Quality and Productivity, pp. 108–113.
   Google Scholar
• Mittag, H. J. (1997). “Measurement Error Effects on the Performance of Process Capability Indices” in Frontiers in Statistical Quality Control edited by H. J. Lenz and P. Th. Wilrich, Heidelberg Physica-Verlag, pp. 195–206.
   Google Scholar
• Mukherjee, S. P. (1995). “Process Capability Indices and Associated Inference Problems”. Proceedings of the International Conference on Statistical Method and Statistical Computation, Seoul, South Korea pp. 243–249.
   Google Scholar
• Mukherjee, S. P. and Singh, N. K. (1994). “Sampling Properties of an Estimate of the Bivariate Process Capability Index”. Economic Quality Control 9, pp. 73–78.
   Google Scholar
• Mukherjee, S. P. and Singh, N. K. (1997/8). “Sampling Properties of an Estimator of a New Process Capability Index for Weibull Distributed Quality Characteristics”. Quality Engineering 10, pp. 291–294.
   Google Scholar
• Munichika, M. (1992). “Studies on Process Capability in Machining Processes”. Reports of Statistical Applied Research JUSE 39, pp. 14–29.
   Google Scholar
• Nagata, Y. (1995a). “Point Estimation of the Process Capability Index”. Okayama Economical Review 26.
   Google Scholar
• Nagata, Y. (1995b). “On Normal Approximation to the Distribution of the Estimated Process Capability Index, Cpk“. Journal of the Japanese Statistical Society 25, pp. 159–171.
   Google Scholar
• Nagata, Y. and Nagahata, H. (1992). “Approximation Formulas for the Confidence Intervals of Process Capability Indices”. Reports of Statistical Applied Research JUSE 39, pp. 15–29.
   Google Scholar
• Nelson, L. S. (1999). “The Calculation of Process Capability Indices”. Journal of Quality Technology 31, pp. 249–250.
   Web of Science ®Google Scholar
• Nelson, P. R. (1992). “Editorial”. Journal of Quality Technology 24, p. 175.
   Google Scholar
• Newton, D. (1999). “Process Capability” in Gower Handbook of Quality Management, 2nd ed., edited by D. Lou. Gower. Aldershot, Hampshire, U.K.
   Google Scholar
• Niverthi, M. and Dey, D. K. (2000). “Multivariate Process Capability: A Bayesian Perspective”. Communications in Statistics—Simulation and Computation 29, pp. 667–687.
   Web of Science ®Google Scholar
• O'Neill, E. E. and Krishnamoortry, K. S. (1997). “Capability Index for Non-Normal Processes”. Transactions of the ASQC Technical Conference, pp. 769–773.
   Google Scholar
• Orchard, T. (2000). “Quality Improvement”. Royal Statistical Society News 27, p. 8.
   Google Scholar
• Otto, G. H. and Arnold, K. E. (1995). “Process Capability Regulation and the Consequences for Offshore Platform Discharge of Oil and Grease”. Proceedings of the ASA Section on Statistics and the Environment, pp. 81–86.
   Google Scholar
• Padgett, W. J. and Sengupta, A. (1996). “Performance of Process Capability Indices for Weibull and Lognormal Distributions or Autoregressive Processes”. International Journal of Reliability, Quality and Safety Engineering 3, pp. 217–229.
   Google Scholar
• Palmer, K. and Tsui, K. L. (1999). “A Review and Interpretations of Process Capability Indices”. Annals of Operations Research 87, pp. 31–47.
   Web of Science ®Google Scholar
• Parlar, M. and Wesolowsky, G. O. (1999). “Specification Limits, Capability Indices and Centering in Assembly Manufacture”. Journal of Quality Technology 31, pp. 317–325.
   Web of Science ®Google Scholar
• Pearn, W. L. and Chang, C. S. (1997). “The Performance of Capability Index Cs on Skewed Distributions”. Communications in Statistics—Simulation and Computation 26, pp. 1361–1377.
   Web of Science ®Google Scholar
• Pearn, W. L. and Chen, K. S. (1996). “A Bayesian-Like Estimator of Cpk“. Communications in Statistics—Simulation and Computation 25, pp. 321–329.
   Web of Science ®Google Scholar
• Pearn, W. L. and Chen, K. S. (1997). “A Practical Implementation of the Process Capability Index Cpk“. Quality Engineering 9, pp. 721–737.
   Google Scholar
• Pearn, W. L. and Chen, K. S. (1998). “New Generalization of Process Capability Index Cpk“. Journal of Appplied Statistics 25, pp. 801–810.
   Web of Science ®Google Scholar
• Pearn, W. L. and Kotz, S. (1994/5). “Application of Clements' Method for Calculating Second- and Third-Generation Process Capability Indices for Non-Normal Pearsonian Populations”. Quality Engineering 7, pp. 139–145.
   Google Scholar
• Pearn, W. L.; Kotz, S.; and Johnson, N. L. (1992). “Distributional and Inferential Properties of Process Capability Indices”. Journal of Quality Technology 24, pp. 216–231.
   Web of Science ®Google Scholar
• Pearn, W. L.; Kotz, S.; and Wang, Q. (1995). “Estimating the Distribution of the Flexible Process Capability Index, Cpq“. Preprint, University of Maryland, College Park, MD.
   Google Scholar
• Pearn, W. L.; Lin, C. H.; and Chen, H. S. (1998). “Distributional and Inferential Properties of the Process Accuracy and Process Precision Indices”. Communications in Statistics—Theory and Methods 27, pp. 985–1000.
   Web of Science ®Google Scholar
• Pearn, M. and Xekalaki, E. (1998). “On a Refinement of Certain Process Capability Indices”. Technical Report No. 56, Department of Statistics, Athens University of Economics and Business, Athens, Greece.
   Google Scholar
• Persijn, M. and Vannuland, Y. (1996/7). “Relation Between Measurement System Capability and Process Capability”. Quality Engineering 9, pp. 95–98.
   Google Scholar
• Phillips, G. P. (1993). “Target Ratio and Loss Ratio—New Capability Indices Express Pure Target Error and Expand the Uses of Cpm“. Proceedings of the ASA Section on Quality and Productivity, pp. 266–270.
   Google Scholar
• Pigniatiello, J. J. and Ramberg, J. S. (1993). “Process Capability Indices—Just Say ‘No’”. Transactions of the ASQC Technical Conference, pp. 92–104.
   Google Scholar
• Pikands, C. (1975). “Statistical Inference Using the Extreme Order Statistics”. Annals of Statistics 3, pp. 119–131.
   Web of Science ®Google Scholar
• Pillet, M.; Rochon, S.; and Duclos, E. (1997/8). “SPC-generalization of Capability Index Cpm: Case of Unilateral Tolerances”. Quality Engineering 10, pp. 171–176.
   Google Scholar
• Polansky, A. M. (1998). “A Smooth Nonparametric Approach to Process Capability”. Quality and Reliability Engineering International 14, pp. 43–48.
   Web of Science ®Google Scholar
• Polansky, A. M. (2000). “An Algorithmn for Computing a Smooth Non-Parametric Capability Estimate”. Journal of Quality Technology 32, pp. 284–289.
   Web of Science ®Google Scholar
• Polansky, A. M.; Chou, Y.-M.; and Mason, R. L. (1998/9). “Estimating Process Capability Indices for a Truncated Distribution”. Quality Engineering 11, pp. 257–265.
   Google Scholar
• Porter, L. J. and Oakland, J. S. (1991). “Process Capability Indices—an Overview of Theory and Practice”. Quality and Reliability Engineering International 7, pp. 437–448.
   Google Scholar
• Pyzdek, T. (1992). “Process Capability Analysis Using Personal Computers”. Quality Engineering 4, pp. 419–440.
   Google Scholar
• Rinne, M. and Mittag, H. J. (1999). Prozeßfähigkeitsmessung für die industrielle Praxis (with English summary), Carl Hanser Verlag München Wien.
   Google Scholar
• Rivera, L. A. R.; Hubele, N. F.; and Lawrence, F. P. (1996). “Cpk Index Estimation Using Data Transformation”. Computers and Industrial Engineering 29, pp. 55–58.
   Web of Science ®Google Scholar
• Rodriguez, R. N. (1992). “Recent Developments in Process Capability Analysis”. Journal of Quality Technology 24, pp. 176–186.
   Web of Science ®Google Scholar
• Ruczinski, I. (1996). “The Relation Between Cpm And The Degree Of Includence”. Doctoral Dissertation, University of Würzberg, Würzberg, Germany.
   Google Scholar
• Rumph, D. L. (1996). “Process Capability Indices: Heuristics for the Smart Case of a Quality Metric”. Proceedings of the ASA Section on Physical and Engineering Sciences, pp. 368–369.
   Google Scholar
• Runger, G. C. (1993). “Designing Process Capability Studies”. Quality Progress 29, pp. 31–34.
   Google Scholar
• Sarkar, A. and Pal, S. (1997). “Estimation of Process Capability Index for Concentricity”. Quality Engineering 9, pp. 665–671.
   Google Scholar
• Schneider, H.; Pruett, J. and Lagrange, C. (1995/6). “Uses of Process Capability Indices in the Supplier Certification Process”. Quality Engineering 8, pp. 225–235.
   Google Scholar
• Scholtz, F. and Vangel, M. (1998). “Tolerance Bounds and Cpk Confidence Bounds Under Batch Effects” in Advances in Stochastic Models for Reliability, Quality and Safety edited by W. Kahle, Evon Collani, J. Franz, and U. Jensen. Birkhauser, Basel, Chapter 24, pp. 361–373.
   Google Scholar
• Shahriari, H.; Hubele, N. F.; and Lawrence, F. P. (1995). “A Multivariate Process Capability Vector”. Proceedings of the 4th Industrial Engineering Research Conference, Nashville, TN, pp. 303–308.
   Google Scholar
• Shiau, J. J. H.; Chiang, C. T.; and Hung, H.-N. (1999). “A Bayesian Procedure for Process Capability Assessment”. Quality and Reliability Engineering International 15, pp. 369–378.
   Web of Science ®Google Scholar
• Shore, H. (1997). “Process Capability Analysis When Data are Autocorrelated”. Quality Engineering 9, pp. 615–626.
   Google Scholar
• Singpurwalla, N. D. (1998). “The Stochastic Control of Process Capability Indices”. Test, pp. 1–33. (Discussion: D. R. Cox, D. K. Dey, A. Fries, J. K. Ghosh, M. A. Gömez-Villegas, T. Z. Irony, W. Klieman, S. Kotz, D. V. Lindley, M.F. McGrath, and D. Pea, pp. 33–79).
   Google Scholar
• Smith, R. L. (1987). “Estimating Tails of Probability Distributions”. Annals of Statistics 15, pp. 1174–1207.
   Web of Science ®Google Scholar
• Somerville, S. E. and Montgomery, D. C. (1996/7). “Process Capability Indices and Non-Normal Distributions”. Quality Engineering 9, pp. 305–316.
   Google Scholar
• Spiring, F. A. (1995). “Process Capability: A Total Quality Management Tool”. Total Quality Management 6, pp. 121–133.
   Google Scholar
• Spiring, F. A. (1997). “A Unifying Approach to Process Capability Indices”. Journal of Quality Technology 29, pp. 49–58.
   Web of Science ®Google Scholar
• Stephenson, M. R. and Martz, K. L. C. (1998). “Capability Analysis in Asymmetric Situations”. Proceedings of the ASA Section on Quality and Productivity, pp. 65–70.
   Google Scholar
• Subbaiah, P. and Taam, W. (1993). “Inference on the Capability Index Cpm“. Communications in Statistics—Theory and Methods 22, pp. 53–560.
   Web of Science ®Google Scholar
• Sundaraiyar, V. H. (1996). “Estimation of a Process Capability Index for Inverse Gaussian Distribution”. Communications in Statistics—Theory and Methods 25, pp. 2381–2398.
   Web of Science ®Google Scholar
• Taam, W.; Subbaiah, P.; and Liddy, J. W. (1993). “A Note on Multivariate Capability Indices”. Journal of Applied Statistics 20, pp. 339–351.
   Google Scholar
• Tang, P. F. and Barnett, N. S. (1998). “Capability Indices for Multivariate Processes”. Technical Report, Division of Computation, Mathematics, and Science, Victoria University, Melbourne, Australia.
   Google Scholar
• Tsui, K.-L. (1997). “Interpretation of Process Capability Indices and Some Alternatives”. Quality Engineering 9, pp. 587–596.
   Google Scholar
• Vännman, K. (1995). “A Unified Approach to Capability Indices”. Statistica Sinica 5, pp. 805–820.
   Web of Science ®Google Scholar
• Vännman, K. (1997a). “Distribution and Moments in Simplified Form for a General Class of Capability Indices”. Communications in Statistics—Theory and Methods 26, pp. 159–171.
   Google Scholar
• Vännman, K. (1997b). “A General Class of Capability Indices in the Case of Asymmetric Tolerances”. Communications in Statistics—Theory and Methods 26, pp. 2049–2072.
   Google Scholar
• Vännman, K. (1997c). “Interpreting Process Capability Using Graphical Methods”. Research Report Division of Quality Technology Statistics, Luleå University of Technology, Luleå, Sweden.
   Google Scholar
• Vännman, K. (1998a). “Families of Capability Indices for One-Sided Specification Limits”. Statistics 31, pp. 43–66.
   Google Scholar
• Vännman, K. (1998b). “Process Capability Plots: A Complement to Capability Indices”. Invited Paper for the 6th International Workshop on Intelligent Statistical Quality Control, University of Würzburg, Würzburg, Germany.
   Google Scholar
• Vännman, K. and Kotz, S. (1995a). “A Superstructure of Capability Indices: Distributional Properties and Implications”. Scandinavian Journal of Statistics 22, pp. 477–491.
   Google Scholar
• Vännman, K. and Kotz, S. (1995b). “A Superstructure of Capability Indices: Asymptotics and its Implications”. International Journal of Reliability, Quality and Safety Engineering 2, pp. 343–360.
   Google Scholar
• Veevers, A. (1995). “A Capability Index for Multiple Response”. CSIRO Mathematics and Statistics Report DMS-095, Australia.
   Google Scholar
• Veevers, A. (1998). “Viability and Capability Indices for Multiresponse Processes”. Journal of Applied Statistics 25, pp. 545–558.
   Web of Science ®Google Scholar
• Veevers, A. (1999). “Capability Indices For Multiresponse Processes” in Statistical Process Monitoring and Optimization edited by S. H. Park and G. G. Vining, Marcel-Dekker. New York, NY pp. 241–256.
   Google Scholar
• Voelcker, M. B. and Morse, E. P. (1997). “De-mystifying Cp and Cpk In Manufacturing”. The Browne and Sharp Publications of American Manufacturing, pp. 40–42.
   Google Scholar
• Walker, E. (1995). “Review of Kotz, S. and Johnson, N. L. (1993)”. Journal of the American Statistical Association 90, p. 1127.
   Google Scholar
• Wang, C. M. and Lam, C. T. (1996). “Confidence Limits for Proportion of Conformance”. Journal of Quality Technology 28, pp. 439–445.
   Web of Science ®Google Scholar
• Wang, F. K. and Chen, J. C. (1998/9). “Capability Index Using Principal Components Analysis”. Quality Engineering 11, pp. 21–27.
   Google Scholar
• Wang, F. K. and Hubele, N. F. (1999). “Quality Evaluation Using Geometric Distance Approach”. International Journal of Reliability, Quality and Safety Engineering 6, pp. 139–153.
   Google Scholar
• Wang, F. K. and Hubele, N. F. (2001). “Quality Evaluation of Geometric Tolerance Regions in Form and Location”. Quality Engineering, 14, pp. 203–209.
   Google Scholar
• Wang, F. K.; Hubele, N. F.; Lawrence, F. P.; Miskulin, J. O.; and Shariari, H. (2000). “Comparison of Three Multivariate Process Capability Indices”. Journal of Quality Technology 32, pp. 263–275.
   Web of Science ®Google Scholar
• Weight, T. (1996). “Comment on Collins (1995)”. The Statistician 45, p. 126.
   Google Scholar
• Wheeler, D. J. (1999). Beyond Capability Confusion. SPC Press, Knoxville, TN.
   Google Scholar
• Wierda, S. J. (1992). “Multivariate Quality Control-Estimation of the Percentage of Good Product”. Technical Report, University of Groningen, Groningen, Netherlands.
   Google Scholar
• Wierda, S. J. (1993). “A Multivariate Process Capability Index”. Transactions of the ASQC Quality Congress, pp. 342–348.
   Google Scholar
• Wierda, S. J. (1994a). “Multivariate Statistical Process Control—Recent Results and Directions for Future Research”. Statistica Neerlandica 48, pp. 147–168.
   Google Scholar
• Wierda, S. J. (1994b). “Multivariate Statistical Process Control”. Thesis, Wolters-Noordhof, Groningen, Netherlands.
   Google Scholar
• Wright, P. A. (1995). “A Process Capability Index Sensitive to Skewness”. Journal of Statistical Computation and Simulation 52, pp. 195–203.
   Web of Science ®Google Scholar
• Wright, P. A. (1998). “The Probability Density Function of Process Capability Index Cpmk“. Communications in Statistics—Theory and Methods 27, pp. 1751–1789.
   Web of Science ®Google Scholar
• Wright, P. A. (2000). “The Cumulative Distribution of Process Capability Index Cpm“. Statistics and Probability Letters 47, pp. 249–251.
   Web of Science ®Google Scholar
• Yang, W. (1993). “The Minimum Variance Unbiased Estimator and Best Test of the Process Capability Index Cp“. Chinese Journal of Applied Probability and Statistics 9, pp. 82–86.
   Google Scholar
• Yeh, A. B. and Bhattacharya, S. (1998). “A Robust Capability Index”. Communications in Statistics—Simulation and Computation 27, pp. 565–589.
   Web of Science ®Google Scholar
• Yeh, A. B. and Chen, H. (1999). “A Nonparametric Multivariate Process Capability Index”. Preprint.
   Google Scholar
• Zhang, N. F. (1997). “Combining Process Capability Indices”. Proceedings of the ASA Section on Quality and Productivity, pp. 84–89.
   Google Scholar
• Zhang, N. F. (1998). “Estimating Process Capability Indexes for Autocorrelated Data”. Journal of Applied Statistics 25, pp. 559–574.
   Web of Science ®Google Scholar
• Zhang, Y. and Feng, X. D. (1999/2000). “Target Allocation for Maximizing Wear Allowance of Running Fits Based on Process Capability”. Quality Engineering 12, pp. 169–176.
   Google Scholar
• Ziemer, T. L. (1993). “Graphical Methods for Process Control” in Handbook of Statistics, Vol. 9: Computational Statistics, pp. 999–1019, Elsevier Science North Holland: Amsterdam, Netherlands.
   Google Scholar
• Zimmer, L. S. and Hubele, N. F. (1997/8). “Quantiles of the Sampling Distribution of Cpm“. Quality Engineering 10, pp. 309–329.
   Google Scholar
• Zimmer, L. S., Hubele, N. F.; and Zimmer, W. J.; (2001). “Confidence Intervals and Sample Size Determination of Cpm“. Quality and Reliability Engineering International 17, pp. 51–68.
   Web of Science ®Google Scholar