References
- Aitchison, J. and Dunsmore, I. R. (1975). Statistical Prediction Analysis. Cambridge, UK: Cambridge University Press.
- Ashburn, T. and Skamser, D. (2008). “Highly Accelerated Testing of Capacitors for Medical Applications”. In SMTA Medical Applications Symposium, Anaheim, CA.
- Basu, A. and Ebrahimi, N. (1982). “Nonparametric Accelerated Life Testing”. IEEE Transactions on Reliability 31, pp. 432–435.
- Chaloner, K. and Larntz, K. (1992). “Bayesian Design for Accelerated Life Testing”. Journal of Statistical Planning and Inference 33, pp. 245–259.
- Che, F. X. and Pang, H. L. (2004). “Harsh Solder Joint Reliability Tests by Impact Drop and Highly Accelerated Life Test (HALT)”. In Proceedings of the 2004 Electronics Packaging Technology Conference, IEEE.
- Crow, L. H. (1974). “Reliability Analysis for Complex Repairable Systems”. In Reliability and Biometry, Proschan, F. and Serfling, R. J., eds., pp. 379–410. Philadelphia, PA: SIAM.
- Crow, L. H. (1982). “Confidence Interval Procedures for the Weibull Process with Applications to Reliability Growth”. Technometrics 24, pp. 67–72.
- DOD (2011). MIL-HDBK-338B, Electronic Reliability Design Handbook. Washington, DC: U.S. Department of Defense.
- Donahoe, D.; Zhao, K.; Murray, S.; and Ray, R. M. (2008). “Accelerated Life Testing”. In Encyclopedia of Quantitative Risk Analysis and Assessment, Melnick, E. L. and Everitt, B. S., eds., vol. 1, pp. 2–7. Hoboken, NJ: John Wiley # Sons.
- Duane, J. T. (1964). “Learning Curve Approach to Reliability Modeling”. IEEE Transactions on Aerospace 2, pp. 563–566.
- Ebeling, C. E. (2010). An Introduction to Reliability and Maintainability Engineering, 2nd edition. Long Grove, IL: Waveland Press.
- Edson, L. (2011). “Calibrated Accelerated Life Testing (General Motors Test Procedure GMW8758)”. Technical Report, General Motors Worldwide.
- Elsayed, E. (2003). “Accelerated Life Testing”. In Handbook of Reliability Engineering, Pham, H., ed., pp. 415–428. London, UK: Springer.
- Escobar, L. A. and Meeker, W. Q. (2006). “A Review of Accelerated Test Models”. Statistical Science 21, pp. 552–577.
- Fleming, K.; Mikschl, T.; Bidwell, D.; Read, J.; and Wiedemeir, B. (1998). “Piping System Reliability and Failure Rate Estimation Models for Use in Risk-Informed In-Service Inspection Applications”. Technical Report TR-110161. Palo Alto, CA: Electric Power Research Institute.
- Gray, K. (2012). “Electronics Testing into the 21st Century: Success in Test Is in Strength Capabilities, Not Environmental Specifications”. Technical Report, Accelerated Reliability Solutions, LLC.
- Hamada, M. (1993). “Reliability Improvement via Taguchi's Robust Design”. Quality and Reliability Engineering International 9, pp. 7–13.
- Hamada, M. (1995). “Using Statistically Designed Experiments to Improve Reliability and to Achieve Robust Performance”. IEEE Transactions on Reliability 44, pp. 206–215.
- Hamada, M. S.; Wilson, A. G.; Reese, C. S.; and Martz, H. F. (2008). Bayesian Reliability. New York, NY: Springer.
- Hobbs, G. K. (2000). Accelerated Reliability Engineering: HALT and HASS. Chichester, UK: John Wiley # Sons.
- Hobbs, G. K. (2002). “The History of HALT and HASS”. Sound # Vibration (October), p. 5.
- Hobbs, G. K. (2008). “HALT and HASS: The Accepted Quality and Reliability Paradigm”. Technical Report. Westminster, CO: Hobbs Engineering.
- ISO (1986). ISO 8402, Quality # Vocabulary. Geneva, Switzerland: International Organization for Standardization.
- JMP (2007). Version 7. Cary, NC: SAS Institute Inc.
- Kok, K. D. (ed.) (2009). Nuclear Engineering Handbook. Boca Raton, FL: CRC Press.
- Lawless, J. F. (2002). Statistical Models and Methods for Lifetime Data, 2nd edition. New York, NY: John Wiley # Sons.
- Lu, C. J. and Meeker, W. Q. (1993). “Using Degradation Measures to Estimate a Time-to-Failure Distribution”. Technometrics 35, pp. 161–174.
- Lu, C. J.; Meeker, W. Q.; and Escobar, L. A. (1996). “A Comparison of Degradation and Failure-Time Analysis Methods for Estimating a Time-to-Failure Distribution”. Statistica Sinica 6, pp. 531–546.
- McLean, H. W. (2008). “A Method of Estimating Product Field Failure Rate from the Results of HALT”. IN IEEE Accelerated Stress Testing and Reliability Workshop, pp. 1–6. Portland, OR: IEEE/CPMD.
- McLean, H. W. (2009). HALT, HASS, and HASA Explained. Milwaukee, WI: ASQ Quality Press.
- Meeker, W.; Escobar, L. A.; and Lu, C. J. (1998). “Accelerated Degradation Tests: Modeling and Analysis”. Technometrics 40, pp. 89–99.
- Meeker, W. Q. (1987). “Limited Failure Population Life Tests: Application to Integrated Circuit Reliability”. Technometrics 29, pp. 51–65.
- Meeker, W. Q. and Escobar, L. A. (1998). Statistical Methods for Reliability Data. New York, NY: John Wiley # Sons.
- Meeker, W. Q. and Hamada, M. (1995). “Statistical Tools for the Rapid Development and Evaluation of High-Reliability Products”. IEEE Transactions on Reliability 44, pp. 187–198.
- Meeker, W. Q.; Sarakakis, G.; and Athanasios, A. (2012). “More Pitfalls in Conducting and Interpreting the Results of Accelerated Tests”. Technical Report 2012-05, Department of Statistics, Iowa State University, Ames, IA.
- Morris, M. D. (2011). Design of Experiments: An Introduction Based on Linear Models. Boca Raton, FL: Chapman # Hall/CRC.
- Musa, J. D.; Iannino, A.; and Okumoto, K. (1987). Software Reliability: Measurement, Prediction, Application. McGraw-Hill.
- Nelson, W. B. (1990). Accelerated Testing: Statistical Models, Test Plans, and Data Analysis. Hoboken, NJ: John Wiley # Sons.
- Nelson, W. B. (2004). Applied Life Data Analysis. Hoboken, NJ: John Wiley # Sons.
- Nelson, W. B. (2005a). “A Bibliography of Accelerated Test Plans”. IEEE Transactions on Reliability 54, pp. 194–197.
- Nelson, W. B. (2005b). “A Bibliography of Accelerated Test Plans. Part II: References”. IEEE Transactions on Reliability 54, pp. 370–373.
- O'Connor, P. D. T. (2002). Practical Reliability Engineering, 4th edition. Chichester, UK: John Wiley # Sons.
- Pang, J. H.; Xu, L.; Shi, X.; Zhou, W.; and Ngoh, S. (2004). “Intermetallic Growth Studies on Sn-Ag-Cu Lead-Free Solder Joints”. Journal of Electronic Materials 33, pp. 1220–1226.
- Ramberg, W. and Osgood, W. R. (1943). “Description of Stress–Strain Curves by Three Parameters”. Technical Note 902, National Advisory Committee for Aeronautics, Washington, DC. Download from http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930081614_1993081614.pdf.
- Rausand, M. and H⊘yland, A. (2004). System Reliability Theory: Models, Statistical Methods, and Applications, 2nd edition. Hoboken, NJ: Wiley-Interscience.
- Shi, Y.; Escobar, L. A.; and Meeker, W. Q. (2009). “Accelerated Destructive Degradation Test Planning”. Technometrics 51, pp. 1–13.
- Silverman, M. (1998). “Summary of HALT and HASS Results at an Accelerated Reliability Test Center”. In Proceedings of the Annual Reliability and Maintainability Symposium, pp. 30–36. IEEE.
- Sobczyk, K. (1987). “Stochastic Models for Fatigue Damage of Materials”. Advances in Applied Probability 19, pp. 652–673.
- Soyer, R.; Erkanli, A.; and Merrick, J. R. (2008). “Accelerated Life Tests: Bayesian Models”. In Encyclopedia of Statistics in Quality and Reliability, Ruggeri, F.; Kenett, R.; and Faltin, F., eds. New York, NY: John Wiley # Sons.
- Thompson, W. A. (1981). “On the Foundations of Reliability”. Technometrics 23, pp. 1–13.
- USAMSAA (2011). MIL-HDBK-189C, Reliability Growth Management. Washington, DC: US Department of Defense.
- Vassiliou, P. and Mettas, A. (2003). “Understanding Accelerated Life-Testing Analysis”. In Annual Reliability and Maintainability Symposium.
- Westinghouse Electric. (2003). “The Westinghouse AP1000 Advanced Nuclear Plant”. Technical Report, Westinghouse Electric Co.
- Young, J. D. (1987). “Chernobyl: The Accident Sequence”. In Chernobyl: A Technical Appraisal, pp. 27–42. British Nuclear Energy Society.