References
- Apley, D. W. and Shi, J. (1999). “The GLRT for Statistical Process Control of Autocorrelated Processes”. IIE transactions 31, pp. 1123–1134.
- Chakaraborty, B.; Chaudhuri, P.; and Oja, H. (1998). “Operating Transformation Retransformation on Spatial Median and Angle Test”. Statistica Sinica 8, pp. 767–784.
- Cortez, P.; Cerdeira, A.; Almeida, F.; Matos, T.; and Reis, J. (2009). “Modeling Wine Preferences by Data Mining from Physicochemical Properties”. Decision Support Systems 47, pp. 547–553.
- Crosier, R. B. (1988). “Multivariate Generations of Cumulative Sum Quality Control Schemes”. Technometrics 30, pp. 219–303.
- Efron, B.; Hastie, T.; Johnstone, I.; and Tibshirani, R. (2004). “Least Angle Regression”. The Annals of Statistics 32, pp. 407–489.
- Han, D. and Tsung, F. (2006). “A Reference-Free CUSCORE Chart for Dynamic Mean Change Detection and a Unified Framework for Charting Performance Comparison”. Journal of the American Statistical Association 101, pp. 368–386.
- Hawkins, D. M. (1991). “Multivariate Quality Control Based on Regression-Adjusted Variables”. Technometrics 33, pp. 61–75.
- Hawkins, D. M. (1993). “Regression Adjustment for Variables in Multivariate Quality Control”. Journal of Quality Technology 25, pp. 170–182.
- Hawkins, D. M. and Olwell, D. H. (1998). Cumulative Sum Charts and Charting for Quality Improvement. New York, NY: Springer Science # Business Media.
- Healy, J. D. (1987). “A Note on Multivariate CUSUM Procedures”. Technometrics 29, pp. 409–412.
- Hettmansperger, T. P. and Randles, R. H. (2002). “A Practical Affine Equivariant Multivariate Median”. Biometrika 89, pp. 851–860.
- Horowitz, J. L. and Spokoiny, V. G. (2001). “An Adaptive, Rate-Optimal Test of a Parametric Mean-Regression Model Against a Nonparametric Alternative”. Econometrica 69, pp. 599–631.
- Huwang, L. and Hung, Y. (2007). “Effect of Measurement Error on Monitoring Multivariate Process Variability”. Statistica Sinica 17, pp. 749–760.
- Huwang, L.; Yeh, A. B.; and Hung, Y. (2007). “Monitoring Mulitvariate Process Variability for Individual Observations”. Journal of Quality Technology 39, pp. 258–278.
- Jensen, W. A.; Jones-Farmer, L. A.; Champ, C. W.; and Woodall, W. H. (2006). “Effects of Parameter Estimation Control Chart Properties: A Literature Review”. Journal of Quality Technology 38, pp. 349–364.
- Jones, L. A.; Champ, C. W.; and Rigdon, S. E. (2001). “The Performance of Exponentially Weighted Moving Average Charts with Estimated Parameters”. Technometrics 43, pp. 156–167.
- Li, J.; Zhang, X.; and Jeske, D. R. (2013a). “Nonparametric Multivariate CUSUM Control Charts for Location and Scale Changes”. Journal of Nonparametric Statistics 25, pp. 1–20.
- Li, Z.; Zou, C.; and Wang, Z. (2013b). “A Multivariate Sign Chart for Monitoring Process Shape Parameters”. Journal of Quality Technology 45, pp. 149–165.
- Linna, K. W. and Woodall, W. H. (2001). “Effect of Measurement Error on Shewhart Control Charts”. Journal of Quality Technology 33, pp. 213–222.
- Linna, K. W.; Woodall, W. H.; and Busby, K. L. (2001). “The Performance of Multivariate Control Charts in the Presence of Measurement Error”. Journal of Quality Technology 33, pp. 349–355.
- Liu, R. Y. (1995). “Control Charts for Multivariate Processes”. Journal of the American Statistical Association 90, pp. 1380–1387.
- Liu, R. Y.; Singh, K.; and Teng, J. H. (2004). “DDMA-Charts: Nonparametric Multivariate Moving Average Control Charts Based on Data Depth”. Allgemeines Statisches Archiv 88, pp. 235–258.
- Lowery, C. A.; WoodallL, W. H.; Champ, C. W.; and Rigdon, S. E. (1992). “A Multivariate Exponentially Weighted Moving Average Control Chart”. Technometrics 34, pp. 46–53.
- Lu, C. W. and Reynolds, Jr., M. R. (1999a). “Control Charts for Monitoring the Mean and Variance of Autocorrelated Process”. Journal of Quality Technology 31, pp. 259–274.
- Lu, C. W. and Reynolds, Jr., M. R. (1999b). “EWMA Control Charts for Monitoring the Mean of Autocorrelated Processes”. Journal of Quality Technology, 31, pp. 166–188.
- Lucas, J. M. and Saccucci, M. S. (1990). “Exponentially Weighted Moving Average Control Scheme Properties and Enhancements”. Technometrics 32, pp. 1–29.
- Maridia, K. V. (1970). “Measures of Multivariate Skewness and Kurtosis with Applications”. Biometrika 57, pp. 519–530.
- Mason, R. L. and Young, J. C. (2002). Multivariate Statistical Process Control With Industrial Application Philadelphia, PA: SIAM.
- Montgomery, D. C. and Mastrangelo, C. M. (1991). “Some Statistical Process Control Methods for Autocorrelated Data”. Quality Control # Applied Statistics 36, pp. 569–570.
- Oja, H. and Randles, R. (2004). “Multivariate Nonparametric Tests”. Statistical Science 19, pp. 598–605.
- Oja, H. (2010). Multivariate Nonparametric Methods with R. New York, NY: Springer Science # Business Media.
- Rabhu, S. S. and Runger, G. C. (1997). “Designing a Multivariate EWMA Control Chart”. Journal of Quality Technology 29, pp. 8–15.
- Qiu, P. and Hawkins, D. (2001). “A Rank-Based Multivariate CUSUM Procedure”. Technometrics 43, pp. 120–132.
- Qiu, P. and Hawkins, D. (2003). “A Nonparametric Multivariate Cumulative Sum Procedure for Detecting Shifts in All Directions”. Journal of the Royal Statistical Society, Series D: The Statistician 52, pp. 151–164.
- Qiu, P. (2008). “Distribution-Free Multivariate Process Control Based on Log-linear Modeling”. IIE Transactions 40, pp. 664–677.
- Qiu, P. and Xiang, D. (2014). “Univariate Dynamic Screening System: An Approach for Identifying Individuals with Irregular Longitudinal Behavior”. Technometrics 56, pp. 240–268.
- Qiu, P. and Xiang, D. (2015). “Surveillance of Cardiovascular Diseases Using a Multivariate Dynamic Screening System”. Statistics in Medicine 34, pp. 2204–2221.
- Quesenberry, C. P. (1991). “SPC Q Charts for Start-Up Processes and Short and Long Runs”. Journal of Quality Technology 23, pp. 213–224.
- Quesenberry, C. P. (1995). “On Properties of Q Charts for Variables”. Journal of Quality Technology 27, pp. 184–203.
- Randles, R. H. (1989). “A Distribution-Free Multivariate Sign Test Based on Inter Directions”. Journal of the American Statistical Association 84, pp. 1045–1050.
- Randles, R. H. (2000). “A Simpler, Affine Invariant, Multivariate, Distribution-Free Sign Test”. Journal of the American Statistical Association 95, pp. 1263–1268.
- Rigby, R. A. and Stasinopoulos, D. M. (2006). “Using the Box–Cox t Distribution in GAMLSS to Model Skewness and Kurtosis”. Statistical Modelling, 6, pp. 209–229.
- Runger, G. C. and Prabhu, S. S. (1996). “A Markov Chain Model for the Multivariate Exponentially Weighted Moving Averages Control Chart”. Journal of the American Statistical Association 91, pp. 1701–1706.
- Shen, X.; Tsung, F.; and Zou, C. (2014). “A New Multivariate EWMA Scheme for Monitoring Covariance Matrices”. International Journal of Production Research 52, pp. 2834–2850.
- Shu, L.; Apley, D. W.; and Tsung, F. (2002). “Autocorrelated Process Monitoring Using Triggered CUSCORE Charts”. Quality and Reliability Engineering International 18, pp. 411–421.
- Stoumbos, Z. G. and Sullivan, J. H. (2002). “Robustness to Non-Normality of the Multivariate EWMA Control Chart”. Journal of Quality Technology 34, pp. 260–276.
- Sun, R. and Tsung, F. (2003). “A Kernel-Distance-Based Multivariate Control Chart Using Support Vector Methods”. International Journal of Production Research 41, pp. 2975–2989.
- Tibshirani, R. J. (1996). “Regression Shrinkage and Selection via the LASSO”. Journal of the Royal Statistical Society, Series B 58, pp. 267–288.
- Tyler, D. E. (1987). “A Distribution-Free M-Estimator of Multivariate Scatter”. The Annals of Statistics 15, pp. 234–251.
- Wang, H. and Leng, C. (2007). “Unified LASSO Estimation by Least Squares Approximation”. Journal of the American Statistical Association 102, pp. 1039–1048.
- Wang, K. and Tsung, F. (2007). “Monitoring Feedback-Controlled Processes Using Adaptive t Schemes”. International Journal of Production Research 45, pp. 5601–5619.
- Zmba, K. D. and Hawkins, D. M. (2006). “A Multivariate Change-Point for Statistical Process Control”. Technometrics 48, pp. 539–549.
- Zantek, P. F. and Nestler, S. T. (2009). “Performance and Properties of Q-Statistic Monitoring Schemes”. Naval Research Logistics 56, pp. 279–292.
- Zi, X.; Zou, C.; Zhou, Q.; and Wang, J. (2013). “A Direction Multivariate Sign EWMA Control Chart”. Quality Technology and Quantitative Management 10, pp. 115–132.
- Zou, C. and Qiu, P. (2009). “Multivariate Statistical Process Control Using LASSO”. Journal of the American Statistical Association 104, pp. 1586–1596.
- Zou, C. and Tsung, F. (2011). “A Multivariate Sign EWMA Control Chart”. Technometrics 53, pp. 84–97.
- Zou, C.; Jiang, W.; and Tsung, F. (2011). “A LASSO-Based Diagnostic Framework for Multivariate Statistical Process Control”. Technometrics 53, pp. 297–309.
- Zou, C.; Wang, Z.; and Tsung, F. (2012). “A Spatial Rank-Based Multivariate EWMA Control Chart”. Naval Research Logistics 59, pp. 91–110.
- Zou, H. (2006). “The Adaptive LASSO and Its Oracle Properties”. Journal of the American Statistical Association 101, pp. 1418–1429.
- Zou, H.; Hastie, T.; and Tibshirani, R. (2007). “On the ‘Degrees of Freedom’ of LASSO. The Annals of Statistics 35, pp. 2173–2192.