Opportunities and challenges of quality engineering for additive manufacturing

References

• Armillotta, A. 2006. Assessment of surface quality on textured FDM prototypes. Rapid Prototyping Journal 12:35–41.
   Web of Science ®Google Scholar
• Bayarri, M. J., J. Berger, J. Cafeo, G. Garcia-Donato, F. Liu, J. Palomo, J. Parthasarathy, R. Paulo, J. Sacks, and D. Walsh. 2007. Computer model validation with functional output. The Annals of Statistics 35 (5):1874–1906. doi:10.1214/009053607000000163
   Web of Science ®Google Scholar
• Beyer, C. 2014. Strategic implications of current trends in additive manufacturing. Journal of Manufacturing Science and Engineering 136 (6):064701. doi:10.1115/1.4028599
   Web of Science ®Google Scholar
• Bourell, D. L., M. C. Leu, and D. W. Rosen. 2009. Roadmap for additive manufacturing: Identifying the future of freeform processing. Technical report, Sponsored by National Science Foundation and the Office of Naval Research, Washington DC.
   Google Scholar
• Campbell, T., C. Williams, O. Ivanova, and B. Garrett. 2011. Could 3D printing change the world? Technologies, potential, and implications of additive manufacturing. Strategic Foresight Report, Atlantic Council, Washington, DC.
   Google Scholar
• Castillo, E. D., J. M. Grayson, D. C. Montgomery, and G. C. Runger. 1996. A review of statistical process control techniques for short run manufacturing systems. Communications in Statistics–Theory and Methods 25 (11):2723–2737.
   Web of Science ®Google Scholar
• Cheng, L., F. Tsung, and A. Wang. 2017. A statistical transfer learning perspective for modeling shape deviations in additive manufacturing. IEEE Robotics and Automation Letters 2 (4):1988–1993.
   Web of Science ®Google Scholar
• Cheng, L., A. Wang, and F. Tsung. 2018. A prediction and compensation scheme for in-plane shape deviation of additive manufacturing with information on process parameters. IISE Transactions 50 (5):394–406.
   Web of Science ®Google Scholar
• Cho, W., E. M. Sachs, N. M. Patrikalakis, and D. E. Troxel. 2003. A dithering algorithm for local composition control with three-dimensional printing. Computer-Aided Design 35 (9):851–867. doi:10.1016/S0010-4485(02)00122-7
   Web of Science ®Google Scholar
• Colosimo, B., M. Pacella, and Q. Semeraro. 2008. Statistical process control for geometric specifications: On the monitoring of roundness profiles. Journal of Quality Technology 40 (1):1–18.
   Web of Science ®Google Scholar
• Colosimo, B. M. 2018. Modeling and monitoring methods for spatial and image data. Quality Engineering 30 (1):94–111. doi:10.1080/08982112.2017.1366512
   Web of Science ®Google Scholar
• Colosimo, B. M., P. Cicorella, M. Pacella, and M. Blaco. 2014. From profile to surface monitoring: SPC for cylindrical surfaces via Gaussian processes. Journal of Quality Technology 46 (2):95-113. doi:10.1080/00224065.2014.11917956
   Web of Science ®Google Scholar
• Colosimo, B. M. and M. Grasso. 2018. Spatially weighted PCA for monitoring video image data with application to additive manufacturing. Journal of Quality Technology (accepted).
   Web of Science ®Google Scholar
• Colosimo, B. M., M. Pacella, and N. Senin. 2015. Multisensor data fusion via Gaussian process models for dimensional and geometric verification. Precision Engineering 40:199–213.
   Web of Science ®Google Scholar
• Crowder, S. V. and L. Eshleman. 2001. Small sample properties of an adaptive filter applied to low volume SPC. Journal of Quality Technology 33 (1):29–46.
   Web of Science ®Google Scholar
• d’Aveni, R. 2015. The 3-D printing revolution. Harvard Business Review 93 (5):40–48.
   Google Scholar
• Economist. 2012, April. Manufacturing and innovation- A third industrial revolution (Special Report).
   Google Scholar
• Everton, S. K., M. Hirsch, P. Stravroulakis, R. K. Leach, and A. T. Clare. 2016. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials & Design 95: 431–445.
   Web of Science ®Google Scholar
• Gao, W., Y. Zhang, K. R. Devarajan Ramanujan, Y. Chen, C. B. Williams, C. C. Wang, Y. C. Shin, S. Zhang, and P. D. Zavattieri. 2015. The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design 69:65–89. doi:10.1016/j.cad.2015.04.001
   Web of Science ®Google Scholar
• Gibson, I., D. Rosen, and B. Stucker. 2009. Additive manufacturing technologies: Rapid prototyping to direct digital manufacturing. Boston, MA: Springer Verlag.
   Google Scholar
• Grasso, M. and B. M. Colosimo. 2017. Process defects and in situ monitoring methods in metal powder bed fusion: A review. Measurement Science and Technology 28 (4):044005.
   Web of Science ®Google Scholar
• Grasso, M., A. Demir, B. Previtali, and B. Colosimo. 2018. In situ monitoring of selective laser melting of zinc powder via infrared imaging of the process plume. Robotics and Computer-Integrated Manufacturing 49:229–239.
   Web of Science ®Google Scholar
• Grasso, M., V. Laguzza, Q. Semeraro, and B. M. Colosimo. 2017. In-process monitoring of selective laser melting: Spatial detection of defects via image data analysis. Journal of Manufacturing Science and Engineering 139 (5):051001.
   Web of Science ®Google Scholar
• Hawkins, D. M. 1987. Self-starting CUSUM charts for location and scale. The Statistician 36:299–316.
   Google Scholar
• Higdon, D., J. Gattiker, B. Williams, and M. Rightley. 2008. Computer model calibration using high dimensional output. Journal of the American Statistical Association 103 (482):570–583. doi:10.1198/016214507000000888
   Web of Science ®Google Scholar
• Hiller, J. and P. Hornberger. 2016. Measurement accuracy in x-ray computed tomography metrology: Toward a systematic analysis of interference effects in tomographic imaging. Precision Engineering 45:18–32.
   Web of Science ®Google Scholar
• Hilton, P. and P. Jacobs. 2000. Rapid tooling: Technologies and industrial applications. Boca Raton, FL: CRC.
   Google Scholar
• Huang, Q. 2016. An analytical foundation for optimal compensation of three-dimensional shape deformation in additive manufacturing. ASME Transactions, Journal of Manufacturing Science and Engineering 138 (6):061010.
   Web of Science ®Google Scholar
• Huang, Q., H. Nouri, K. Xu, Y. Chen, S. Sosina, and T. Dasgupta. 2014. Statistical predictive modeling and compensation of geometric deviations of three-dimensional printed products. ASME Transactions, Journal of Manufacturing Science and Engineering 136 (6):061008–061018. doi:10.1115/1.4028510
   Web of Science ®Google Scholar
• Huang, Q., J. Zhang, A. Sabbaghi, and T. Dasgupta. 2015. Optimal offline compensation of shape shrinkage for 3D printing processes. IIE Transactions on Quality and Reliability 47 (5):431–441.
   Web of Science ®Google Scholar
• Huang, S., J. Li, K. Chen, T. Wu, J. Ye, X. Wu, and L. Yao. 2012. A transfer learning approach for network modeling. IIE Transactions 44 (11):915–931. doi:10.1080/0740817X.2011.649390
   PubMed Web of Science ®Google Scholar
• Huang, Y., M. C. Leu, J. Mazumder, and A. Donmez. 2015. Additive manufacturing: Current state, future potential, gaps and needs, and recommendations. ASME Journal of Manufacturing Science and Engineering 137 (1):014001. doi:10.1115/1.4028725
   Web of Science ®Google Scholar
• Huff, R. and T. Wohlers. 2018. Interview: Terry Wohlers on the 2018 Wohlers report, explosive growth in 3D printing.
   Google Scholar
• ISO. 2015. ISO/ASTM 52900:2015 Additive manufacturing-general principles-terminology. ASTM F2792-10e1.
   Google Scholar
• Jin, Y., S. Qin, and Q. Huang. 2016. Offline predictive control of out-of-plane geometric errors for additive manufacturing. ASME Transactions on Manufacturing Science and Engineering 138 (12):121005. doi:10.1115/1.4033444
   Web of Science ®Google Scholar
• Joseph, V. R. and S. Melkote. 2009. Statistical adjustments to engineering models. Journal of Quality Technology 41 (4):362–375. doi:10.1080/00224065.2009.11917791
   Web of Science ®Google Scholar
• Kalender, W. A. 2006. X-ray computed tomography. Physics in Medicine & Biology 51 (13):R29.
   PubMed Web of Science ®Google Scholar
• Kellner, T. 2017. An epiphany of disruption: GE additive chief explains how 3D printing will upend manufacturing. https://www.ge.com/reports/epiphany-disruption-ge-additive-chief-explains-3d-printing-will-upend-manufacturing/ (accessed July 2018).
   Google Scholar
• Kennedy, M. C. and A. O’Hagan. 2001. Bayesian calibration of computer models. Journal of the Royal Statistical Society (Series B) 63:425–464.
   Google Scholar
• Kruth, J. P., M. Bartscher, S. Carmignato, R. Schmitt, L. De Chiffre, and A. Weckenmann. 2011. Computed tomography for dimensional metrology. CIRP Annals-Manufacturing Technology 60 (2):821–842. doi:10.1016/j.cirp.2011.05.006
   Web of Science ®Google Scholar
• Langefeld, B. 2016. Roland Berger report: Additive manufacturing–next generation. https://www.rolandberger.com/en/Publications/pub_additive_manufacturing.html (accessed July 2018).
   Google Scholar
• Lee, I., Y. Hong, S. Tseng, and T. Dasgupta. 2018. Sequential test planning for polymer composites. Technometrics, in press.
   Google Scholar
• Luan, H. and Q. Huang. 2015. Predictive modeling of in-plane geometric deviation for 3D printed freeform products. Paper presented at the 2015 IEEE International Conference on Automation Science and Engineering (CASE 2015), Gothenberg, Sweden, August 24-28.
   Google Scholar
• Luan, H. and Q. Huang. 2017a. Prescriptive modeling and compensation of in-plane geometric deviations for 3d printed freeform products. IEEE Transactions on Automation Science and Engineering 14 (1):73–82.
   Web of Science ®Google Scholar
• Luan, H. and Q. Huang. 2017b. Statistical process control of in-plane shape deformation for additive manufacturing. Paper presented at the 2017 IEEE International Conference on Automation Science and Engineering (CASE 2015), Xi’an, China, August 20–23.
   Google Scholar
• Lynn-Charney, C. and D. W. Rosen. 2000. Usage of accuracy models in stereolithography process planning. Rapid Prototyping Journal 6 (2):77–87. doi:10.1108/13552540010323600
   Web of Science ®Google Scholar
• Mani, M., S. Feng, B. Lane, A. Donmez, S. Moylan, and R. Fesperman. 2015. Measurement science needs for real-time control of additive manufacturing powder bed fusion processes. NISTIR 8036. US Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD.
   Google Scholar
• Mani, M., B. M. Lane, M. A. Donmez, S. C. Feng, and S. P. Moylan. 2017. A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes. International Journal of Production Research 55 (5):1400–1418.
   Web of Science ®Google Scholar
• Megahed, F. M., L. J. Wells, J. A. Camelio, and W. H. Woodall. 2012. A spatiotemporal method for the monitoring of image data. Quality and Reliability Engineering International 28 (8):967–980. doi:10.1002/qre.1287
   Web of Science ®Google Scholar
• Megahed, F. M., W. H. Woodall, and J. A. Camelio. 2011. A review and perspective on control charting with image data. Journal of Quality Technology 43 (2):83–98. doi:10.1080/00224065.2011.11917848
   Web of Science ®Google Scholar
• Melchels, F., J. Feijen, and D. Grijpma. 2010. A review on stereolithography and its applications in biomedical engineering. Biomaterials 31 (24):6121–6130.
   PubMed Web of Science ®Google Scholar
• Mori, K., K. Osakada, and S. Takaoka. 1996. Simplified three-dimensional simulation of non-isothermal filling in metal injection moulding by the finite element method. Engineering Computations 13 (2):111–121.
   Web of Science ®Google Scholar
• Moroni, G., W. P. Syam, and S. Petrò. 2014. Towards early estimation of part accuracy in additive manufacturing. Procedia CIRP 21:300–305.
   Google Scholar
• Pan, S. J. and Q. Yang. 2010. A survey on transfer learning. IEEE Transactions on Knowledge and Data Engineering 22 (10):1345–1359. doi:10.1109/TKDE.2009.191
   Web of Science ®Google Scholar
• Pan, Y., C. Zhou, Y. Chen, and J. Partanen. 2014. Multitool and multi-axis computer numerically controlled accumulation for fabricating conformal features on curved surfaces. ASME Transactions, Journal of Manufacturing Science and Engineering 136 (3):031007.
   Web of Science ®Google Scholar
• Qiu, P. 2005. Image processing and jump regression analysis. Volume 599. Hoboken, NJ: John Wiley & Sons.
   Google Scholar
• Qiu, P. 2018. Jump regression, image processing, and quality control. Quality Engineering 30 (1):137–153. doi:10.1080/08982112.2017.1357077
   Web of Science ®Google Scholar
• Quesenberry, C. P. 1991. SPC Q charts for start-up processes and short or long runs. Journal of Quality Technology 23 (3):213–224.
   Web of Science ®Google Scholar
• Repossini, G., V. Laguzza, M. Grasso, and B. M. Colosimo. 2017. On the use of spatter signature for in-situ monitoring of laser powder bed fusion. Additive Manufacturing 16:35–48.
   Web of Science ®Google Scholar
• Sabbaghi, A., T. Dasgupta, Q. Huang, and J. Zhang. 2014. Inference for deformation and interference in 3D printing. Annals of Applied Statistics 8 (3):1395–1415.
   Web of Science ®Google Scholar
• Sabbaghi, A. and Q. Huang. 2016. Predictive model building across different process conditions and shapes in 3D printing. Paper presented at the 2016 IEEE International Conference on Automation Science and Engineering (CASE 2015), Dallas, TX, August 21–24.
   Google Scholar
• Sabbaghi, A. and Q. Huang. 2018. Model transfer across additive manufacturing processes via mean effect equivalence of lurking variables. Annals of Applied Statistics (accepted).
   Web of Science ®Google Scholar
• Sabbaghi, A., Q. Huang, and T. Dasgupta. 2018. Bayesian model building from small samples of disparate data for capturing in-plane deviation in additive manufacturing. Technometrics, in press.
   Web of Science ®Google Scholar
• Secondi, J. 2002. Modeling powder compaction from a pressure-density law to continuum mechanics. Powder Metallurgy 45 (3):213–217.
   Web of Science ®Google Scholar
• Shao, C., J. Ren, H. Wang, J. J. Jin, and S. J. Hu. 2017. Improving machined surface shape prediction by integrating multi-task learning with cutting force variation modeling. Journal of Manufacturing Science and Engineering 139 (1):011014.
   Web of Science ®Google Scholar
• Sood, A., R. Ohdar, and S. Mahapatra. 2009. Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method. Materials & Design 30 (10):4243–4252.
   Web of Science ®Google Scholar
• Spears, T. G. and S. A. Gold. 2016. In-process sensing in selective laser melting (SLM) additive manufacturing. Integrating Materials and Manufacturing Innovation 5 (1):2.
   Google Scholar
• Storåkers, B., N. Fleck, and R. McMeeking. 1999. The viscoplastic compaction of composite powders. Journal of the Mechanics and Physics of Solids 47:785–815. doi:10.1016/S0022-5096(98)00076-3
   Web of Science ®Google Scholar
• Sullivan, J. H. and L. A. Jones. 2002. A self-starting control chart for multivariate individual observations. Technometrics 44 (1):24–33.
   Web of Science ®Google Scholar
• Sun, Q., G. Rizvi, C. Bellehumeur, and P. Gu. 2008. Effect of processing conditions on the bonding quality of FDM polymer filaments. Rapid Prototyping Journal 14:72–80.
   Web of Science ®Google Scholar
• Tapia, G. and A. Elwany. 2014. A review on process monitoring and control in metal-based additive manufacturing. Journal of Manufacturing Science and Engineering 136 (6):060801.
   Web of Science ®Google Scholar
• Tong, K., S. Joshi, and E. Lehtihet. 2008. Error compensation for fused deposition modeling (FDM) machine by correcting slice files. Rapid Prototyping Journal 14 (1):4–14.
   Web of Science ®Google Scholar
• Tong, K., E. Lehtihet, and S. Joshi. 2003. Parametric error modeling and software error compensation for rapid proto-typing. Rapid Prototyping Journal 9 (5):301–313. doi:10.1108/13552540310502202
   Web of Science ®Google Scholar
• Tsung, F., K. Zhang, L. Cheng, and Z. Song. 2018. Statistical transfer learning: A review and some extensions to statistical process control. Quality Engineering 30 (1):115–128.
   Web of Science ®Google Scholar
• Tuo, R. and C. F. J. Wu. 2015. Efficient calibration for imperfect computer models. The Annals of Statistics 43 (6):2331–352. doi:10.1214/15-AOS1314
   Web of Science ®Google Scholar
• Villarraga-Gómez, H., C. Lee, and S. T. Smith. 2018. Dimensional metrology with x-ray CT: A comparison with CMM measurements on internal features and compliant structures. Precision Engineering 51:291–307.
   Web of Science ®Google Scholar
• Wang, A., K. Wang, and F. Tsung. 2014. Statistical surface monitoring by spatial-structure modeling. Journal of Quality Technology 46 (4):359–376. doi:10.1080/00224065.2014.11917977
   Web of Science ®Google Scholar
• Wang, J., R. K. Leach, and X. Jiang. 2015. Review of the mathematical foundations of data fusion techniques in surface metrology. Surface Topography: Metrology and Properties 3 (2):023001.
   Web of Science ®Google Scholar
• Wang, W., C. Cheah, J. Fuh, and L. Lu. 1996. Influence of process parameters on stereolithography part shrinkage. Materials & Design 17 (4):205–213. doi:10.1016/S0261-3069(97)00008-3
   Web of Science ®Google Scholar
• Wang, X. 1999. Calibration of shrinkage and beam offset in SLS process. Rapid Prototyping Journal 5 (3):129–133.
   Web of Science ®Google Scholar
• Weckenmann, A., X. Jiang, K.-D. Sommer, U. Neuschaefer-Rube, J. Seewig, L. Shaw, and T. Estler. 2009. Multisensor data fusion in dimensional metrology. CIRP Annals-Manufacturing Technology 58 (2):701–721. doi:10.1016/j.cirp.2009.09.008
   Web of Science ®Google Scholar
• Weiss, K., T. M. Khoshgoftaar, and D. Wang. 2016. A survey of transfer learning. Journal of Big Data 3 (1):9. doi:10.1186/s40537-016-0043-6
   Google Scholar
• Wohlers, T. 2018. Wohlers report 2018: 3D Printing and Additive Manufacturing State of the Industry Annual Worldwide Progress Report. Wohlers Associates, Inc, Fort Collins, CO.
   Google Scholar
• Woodall, W. H. 2007. Current research on profile monitoring. Production 17 (3):420–425. doi:10.1590/S0103-65132007000300002
   Google Scholar
• Xia, H., Y. Ding, and B. K. Mallick. 2011. Bayesian hierarchical model for combining misaligned two-resolution metrology data. IIE Transactions 43 (4),:242–258.
   Web of Science ®Google Scholar
• Xu, K. and Y. Chen. 2015. Mask image planning for deformation control in projection-based stereolithography process. Journal of Manufacturing Science and Engineering 137 (3):031014. doi:10.1115/1.4029802
   Web of Science ®Google Scholar
• Yan, H., K. Paynabar, and J. Shi. 2017a. Anomaly detection in images with smooth background via smooth-sparse decomposition. Technometrics 59 (1):102–114.
   Web of Science ®Google Scholar
• Yan, H., K. Paynabar, and J. Shi. 2017b. Real-time monitoring of high-dimensional functional data streams via spatio-temporal smooth sparse decomposition. Technometrics (just-accepted).
   Web of Science ®Google Scholar
• Zhou, C., Y. Chen, and R. A. Waltz. 2009. Optimized mask image projection for solid freeform fabrication. ASME Journal of Manufacturing Science and Engineering 131 (6):061004. doi:10.1115/1.4000416
   Web of Science ®Google Scholar
• Zhou, J., D. Herscovici, and C. Chen. 2000. Parametric process optimization to improve the accuracy of rapid prototyped stereolithography parts. International Journal of Machine Tools and Manufacture 40 (3):363–379. doi:10.1016/S0890-6955(99)00068-1
   Web of Science ®Google Scholar
• Zhu, L., T. Dasgupta, and Q. Huang. 2014. A d-optimal design for estimation of parameters of an exponential-linear growth of nanostructures. Technometrics 56 (4):432–442.
   Web of Science ®Google Scholar
• Zou, N., Y. Zhu, J. Zhu, M. Baydogan, W. Wang, and J. Li. 2015. A transfer learning approach for predictive modeling of degenerate biological systems. Technometrics 57 (3):362–373. doi:10.1080/00401706.2015.1044117
   PubMed Web of Science ®Google Scholar