References
- F. Bühler, M. Fridolin, B. Huang, and J.G. Andreasen, B. Elmegaard, presented at the 28th International Conference on Efficiency Cost, Optimization Simulation and Environmental Impact Energy Systems, University of Pau, Pau, France, 2015.
- C.M. Invernizzi, The Organic Rankine Cycle. Closed Power Cycles, Thermodynamic Fundamentals and Applications (Springer Verlang, London, 2013), p. 117–176.
- N.A. Lai, M. Wendland, and J. Fischer, Energy 36, 199–211 (2011). doi:10.1016/j.energy.2010.10.051.
- A.I. Papadopoulos, M. Stijepovic, and P. Linke, Appl. Therm. Eng. 30, 760–769 (2010).
- J. Bao and L. Zhao, Renew. Sust. Energy Rev. 24, 325–342 (2013).
- P. Linke, A. Papadopoulos, and P. Seferlis, Energies 8, 4755–4801 (2015).
- E. Lemmon, M. Huber, and M. McLinden. Reference Fluid Thermodynamic and Transport Properties-REFPROP, Standard Reference Database 23, Version 8.0 (National Institute of Standard and Technology, Boulder, CO, 2007).
- I. Bell, J. Wronski, S. Quoilin, and V. Lemort, Ind. Eng. Chem. Res. 53, 2498–2508 (2014).
- E.H. Wang, H.G. Zhang, B.Y. Fan, M.G. Ouyang, Y. Zhao, and Q.H. Mu, Energy 36, 3406–3418 (2011). doi:10.1016/j.energy.2011.03.041.
- M. Chys, B.M. Van Den, B. Vanslambrouck, and P.M. De, Energy 44, 623–632 (2012).
- J.G. Andreasen, U. Larsen, T. Knudsen, L. Pierobon, and F. Haglind, Energy 73, 204–213 (2014).
- H. Zhai, L. Shi, and Q. An, Energy 74, 2–11 (2014).
- D. Luo, A. Mahmoud, and F. Cogswell, Energy 85, 481–488 (2015). doi:10.1016/j.energy.2015.03.109.
- M. Rödder, M. Neef, C. Laux, and K.P. Priebe, Proc. ASME Turbo Expo Turbine Tech. Conf. Expo. 138, 1–9 (2015).
- J. Hærvig, K. Sørensen, and T.J. Condra, Energy 96, 592–602 (2016).
- J. Xu and C. Yu, Energy 74, 719–733 (2014).
- European Parliament and European council,Off. J. Eur. Commun. L 269, 1–15 (2000).
- M.O. McLinden, A.F. Kazakov, J. Steven Brown, and P.A. Domanski, Int. J. Refrig. 38, 80–92 (2014). doi:10.1016/j.ijrefrig.2013.09.032.
- D.-Y. Peng and D.B. Robinson, Ind. Eng. Chem. Fundam. 15, 59–64 (1976).
- G. Soave, Chem. Eng. Sci. 27, 1197–1203 (1972). doi:10.1016/0009-2509(72)80096-4.
- T. Holderbaum and J. Gmehling, Fluid Phase Equilib. 70, 251–265 (1991). doi:10.1016/0378-3812(91)85038-V.
- A.I. Papadopoulos, M. Stijepovic, P. Linke, P. Seferlis, and S. Voutetakis, Ind. Eng. Chem. Res. 52, 12116–12133 (2013).
- U. Drescher and D. Brüggemann, Appl. Therm. Eng. 27, 223–228 (2007).
- J.S. Brown, R. Brignoli, and S. Daubman, Energy 73, 818–828 (2014).
- W. Liu, D. Meinel, C. Wieland, and H. Spliethoff, Energy 67, 106–116 (2014).
- J. Frutiger, J.G. Andreasen, W. Liu, H. Spliethoff, F. Haglind, J. Abildskov, and G. Sin, Energy 109, 987–997 (2016).
- D. Roskosch and B. Atakan, Energy 81, 202–212 (2015). doi:10.1016/j.energy.2014.12.025.
- D. Sánchez, B. Monje Brenes, M. de Escalona, M. José, and R. Chacartegui, Int. J. Energy Res. 37, 403–411 (2013).
- D.P. Molina-Thierry and A. Flores-Tlacuahuac, Ind. Eng. Chem. Res. 54, 3367–3383 (2015).
- J. Gross and G. Sadowski, Ind. Eng. Chem. Res. 40, 1244–1260 (2001). doi:10.1021/ie0003887.
- N.A. Lai, M. Wendland, and J. Fischer, Fluid Phase Equilib. 283, 22–30 (2009). doi:10.1016/j.fluid.2009.05.011.
- O.A. Oyewunmi, A.I. Taleb, A.J. Haslam, and C.N. Markides, Comput. Therm. Sci. 6, 301–316 (2014).
- M. Lampe, M. Stavrou, H.M. Bücker, J. Gross, and A. Bardow, Ind. Eng. Chem. Res. 53, 8821–8830 (2014). doi:10.1021/ie5006542.
- B. Saleh, G. Koglbauer, M. Wendland, and J. Fischer, Energy 32, 1210–1221 (2007).
- T. Leck, Proc. 3rd IIR Conf. Thermophys. Prop. 155, 1–9 (2009).
- R. Akasaka, K. Tanaka, and Y. Higashi, Int. J. Refrig. 33, 52–60 (2010). doi:10.1016/j.ijrefrig.2009.09.004.
- R. Span, Multiparameter Equations of State, (Springer, Berlin-Heidelberg, Germany, 2000).
- S.K. Kumar, R. Kurz, and J.P. O'Connell, presented at the ASME International Gas Turbine Aeroengine Congress Exhibition, 2, 1–10, (Amer. Soc. of Mechanical Engineering, Indianapolis, IN, 1999).
- W. Wagner and U. Setz, J. Phys. Chem. Ref. Data 20, 1061–155 (1991).
- Q. Dong, R.D. Chirico, X. Yan, X. Hong, and M. Frenkel, J. Chem. Eng. Data. 50, 546–550 (2005).
- A.S. Hukkerikar, B. Sarup, A. Ten Kate, J. Abildskov, G. Sin, and R. Gani, Fluid Phase Equilib. 321, 25–43 (2012).
- G. Sin, K.V. Gernaey, and A. Eliasson Lantz, Biotechnol. Prog. 25, 1043–1053 (2009).
- R. Feistel, J.W. Lovell-Smith, P. Saunders, and S. Seitz, Metrologia 53, 1079–1090 (2016). doi:10.1088/0026-1394/53/4/1079.
- B.E. Poling, J.M. Prausnitz, and J.P. O'Connell, The Properties of Gases Liquids, 5th Ed. (McGraw-Hill, New York, 2004), p. 1–9.
- I. Bell and A. Jäger, J. Res. Natl. Inst. Stand Technol. 121, 238–263 (2016).
- G.M. Kontogeorgis and G.K. Folas, Industrial Applications Thermodynamic Models for Industrial Applications From Classical and Advanced (John Wiley & Son, West Sussex, 2010).
- O. Redlich and J.N.S. Kwong, Chem. Rev. 44, 233–244 (1949). doi:10.1021/cr60137a013.
- I.G. Economou, Ind. Eng. Chem. Res. 41, 953–962 (2002). doi:10.1021/ie0102201.
- J.A. Barker and D. Henderson, J. Chem. Phys. 47, 2856–2861 (1967). doi:10.1063/1.1701689.
- S. Fakouri Baygi and H. Pahlavanzadeh, Chem. Eng. Res. Des. 93, 789–799 (2015). doi:10.1016/j.cherd.2014.07.017.
- D. Ambrose and N.C. Patel, J. Chem. Thermodyn. 16, 459–468 (1984).
- F. Aly and L. Lee, Fluid Phase Equilib. 6, 169–179 (1981).
- M. Frenkel, R.D. Chirico, V. Diky, X. Yan, Q. Dong, and C. Muzny, J. Chem. Inf. Model. 45, 816–838 (2005).
- V. Diky, R.D. Chirico, C.D. Muzny, A.F. Kazakov, K. Kroenlein, J.W. Magee, I. Abdulagatov, J.W. Kang, R. Gani, and M. Frenkel, Chem. Inf. Model. 53, 249–266 (2013). doi:10.1021/ci300470t.
- R.L. Rowley, W.V. Wilding, J.L. Oscarson, T.A. Knotts, and N.F. Giles, DIPPR® Data Compilation of Pure Chemical Properties (Design Institute for Physical Properties, AIChE, New York, 2014).
- Y. Hwang, M. Ohadi, and R. Radermacher, Mech. Eng. 120, 96–99 (1998).
- T.E. Daubert, J. Chem. Eng. Data 41, 365–372 (1996).
- H. Gedanitz, M.J. Davila, and E.W. Lemmon, J. Chem. Eng. Data 60, 1331–1337 (2015). doi: 0.1021/je5010164.
- U. Larsen, L. Pierobon, F. Haglind, and C. Gabrielii, Energy 55, 803–812 (2013).
- J.G. Andreasen, U. Larsen, T. Knudsen, L. Pierobon, and F. Haglind, Energy 73, 204–213 (2014).
- MAN Diesel & Turbo, Report on Waste Heat Recovery System (WHRS) for Reduction of Fuel Consumption, Emissions and EED. (2012). doi: 5510-0136-03ppr.
- MAN Diesel and Turbo, CEAS Engine Data Report 7G95ME-C9.5 with LP SCR & EGB Specified Main Engine and Other Parameters, MAN, Copenhagen, Denmark, 2016.
- J. Kennedy, Encycl. Mach. Learn. 46, 685–691 (2010). doi:10.1109/ICNN.1995.488968.
- B. Efron, Ann. Stat. 7, 1–26 (1979).
- G. Seber and C. Wild, Nonlinear Regression,(John Wiley & Sons, Inc., Hoboken, NJ, 1989).
- J. Frutiger, C. Marcarie, J. Abildskov, and G. Sin, J. Chem. Eng. Data. 61, 602–613 (2016).
- R. Iman and W. Conover, Commun. Stat. Simul. Comput. 11, 311–334 (1982).
- J.G. Aston, H.L. Fink, and S.C. Schumann, J. Am. Chem. Soc. 65, 341–346 (1943).
- I. Mokbel, E. Rauzy, H. Loiseleur, C. Berro, and J. Jose, Fluid Phase Equilib. 108, 103–120 (1995).
- V. Garcia Baonza, M. Caceres Alonso, and J. Nunez Delgado, J. Phys. Chem. 96, 1859–1868 (1992).
- J.P. McCullough, R.E. Pennington, J.C. Smith, I.A. Hossenlopp, and G. Waddington, J. Am. Chem. Soc. 81, 5880–5883 (1959).
- J.C. Helton and F.J. Davis, Reliab. Eng. Syst. Saf. 81, 23–69 (2003).
- MATLAB, The Math Works Inc.,Natick, MA, 2015).
- A. Saltelli and I.M. Sobol, Reliab. Eng. Syst. Saf. 50, 225–239 (1995).
- A. Saltelli, P. Annoni, I. Azzini, F. Campolongo, M. Ratto, and S. Tarantola, Comput. Phys. Commun. 181, 259–270 (2010). doi:10.1016/j.cpc.2009.09.018.
- S. Leekumjorn and K. Krejbjerg, Fluid Phase Equilib. 359, 17–23 (2013). doi:10.1016/j.fluid.2013.07.007.
- M.Z. Stijepovic, P. Linke, A.I. Papadopoulos, and A.S. Grujic, Appl. Therm. Eng. 36, 406–413 (2012). doi:10.1016/j.applthermaleng.2011.10.057.