References
- M. ISHII and K. MISHIMA, “Two-Fluid Model and Hydrodynamic Constitutive Relations,” Nucl. Eng. Des., 82, 107 (1984); http://dx.doi.org/10.1016/0029-5493(84)90207-3.
- “RELAP5/MOD3 Code Manual Volume I: Code Structure, System Models, and Solution Methods,” NUREG/CR-5535, U.S. Nuclear Regulatory Commission (1998).
- “RELAP5-3D Code Manual, Volume I: Code Structure, System Models and Solution Methods,” INEEL-EXT-98-00834, Idaho National Laboratory (2012).
- D. R. LILES et al., “TRAC-PF1/MOD1 Correlations and Models,” NUREG/CR-5069, Los Alamos National Laboratory (1988).
- “TRACE V5.840 Theory Manual: Field Equations, Solution Methods, and Physical Models,” U.S. Nuclear Regulatory Commission (2013).
- D. BESTION, “The Physical Closure Laws in the CATHARE Code,” Nucl. Eng. Des., 124, 229 (1990); http://dx.doi.org/10.1016/0029-5493(90)90294-8.
- J. J. JEONG et al., “Development of A Multi-Dimensional Thermal-Hydraulic System Code, MARS 1.3.1,” Ann. Nucl. Energy, 26, 18, 1611 (1999); http://dx.doi.org/10.1016/S0306-4549(99)00039-0.
- F. BASSENGHI, “Validation of the CFD Code NEPTUNE for a Full-Scale Simulator for Decay Heat Removal Systems With In-Pool Heat Exchangers,” PhD Thesis, University of Bologna, Italy (2013).
- S. J. HA et al., “Development of the Space Code for Nuclear Power Plants,” Nucl. Eng. Technol., 43, 45 (2011); http://dx.doi.org/10.5516/NET.2011.43.1.045.
- K. T. CHAXTON, J. G. COLLIER, and J. A. WARD, “H.T.F.S. Correlation for Two-Phase Pressure Drop and Void Fraction in Tubes,” AERE-R7162, Heat Transfer and Fluid Flow Service (1972).
- D. CHISHOLM, “A Theoretical Basis for the Lockhart-Martinelli Correlation for Two-Phase Flow,” Int. J. Heat Mass Transfer, 10, 1767 (1967); http://dx.doi.org/10.1016/0017-9310(67)90047-6.
- G. KOCAMUSTAFAOGULLARI and Z. WANG, “An Experimental Study on Local Interfacial Parameters in a Horizontal Bubbly Two-Phase Flow,” Int. J. Multiphase Flow, 17, 5, 553 (1991); http://dx.doi.org/10.1016/0301-9322(91)90024-W.
- G. KOCAMUSTAFAOGULLARI and W. D. HUANG, “Internal Structure and Interfacial Velocity Development for Bubbly Two-Phase Flow,” Nucl. Eng. Des., 151, 1, 79 (1994); http://dx.doi.org/10.1016/0029-5493(94)90035-3.
- B. J. KIM, J. W. KIM, and K. D. KIM, “On the Wall Drag Term in the Averaged Momentum Equation for Dispersed Flows,” Nucl. Sci. Eng., 178, 225 (2014); http://dx.doi.org/10.13182/NSE13-57.
- J. D. TALLEY, T. WOROSZ, and S. KIM, “Characterization of Horizontal Air–Water Two-Phase Flow in a Round Pipe, Part II: Measurement of Local Two-Phase Parameters in Bubbly Flow,” Int. J. Multiphase Flow, 76, 223 (2015); http://dx.doi.org/10.1016/j.ijmultiphaseflow.2015.06.012.
- S. W. CHURCHILL, “Friction Factor Equations Spans All Fluid-Flow Regimes,” Chem. Eng., 84, 91 (Nov. 1977).
- G. B. WALLIS, One-Dimensional Two-Phase Flow, p. 324, McGraw-Hill Book Company, New York (1969).
- T. B. ANDERSON and R. JACKSON, “Fluid Mechanical Description of Fluidized Beds: Equations of Motion,” Ind. Eng. Chem. Fundam., 6, 4, 527 (1967); http://dx.doi.org/10.1021/i160024a007.
- A. PROSPERETTI, “Averaged Equations for Multiphase Flow,” Computational Methods for Multiphase Flow, A. PROSPERETTI and G. TRYGGVASON, Eds., Cambridge University Press, New York (2007).