References
- K. TANAKA et al., “Microstructure and Elemental Distribution of Americium-Containing Uranium Plutonium Mixed Oxide Fuel Under a Short-Term Irradiation Test in a Fast Reactor,” J. Nucl. Mater., 385, 407 (2009); https://doi.org/10.1016/j.jnucmat.2008.12.028.
- K. MAEDA et al., “Short-Term Irradiation Behavior of Minor Actinide Doped Uranium Plutonium Mixed Oxide Fuels Irradiated in an Experimental Fast Reactor,” J. Nucl. Mater., 385, 413 (2009); https://doi.org/10.1016/j.jnucmat.2008.12.041.
- K. MAEDA et al., “Short-Term Irradiation Behavior of Low-Density Americium-Doped Uranium–Plutonium Mixed Oxide Fuels Irradiated in a Fast Reactor,” J. Nucl. Mater., 416, 158 (2011); https://doi.org/10.1016/j.jnucmat.2010.11.027.
- Y. IKUSAWA et al., “Development and Verification of the Thermal Behavior Analysis Code for MA Containing MOX Fuels,” Proc. ICONE22, Prague, Czech Republic, July 7–11, 2014.
- N. NAKAE et al., “Development of the Thermal Behavior Analysis Code DIRAD and the Fuel Design Procedure for LMFBR,” J. Nucl. Mater., 188, 331 (1992); https://doi.org/10.1016/0022-3115(92)90493-5.
- K. MORIMOTO et al., “Thermal Conductivities of (U, Pu, Am)O2 Solid Solutions,” J. Alloys. Comp., 452, 54 (2008); https://doi.org/10.1016/j.jallcom.2006.12.159.
- K. MORIMOTO et al., “Thermal Conductivity of (U, Pu, Np)O2 Solid Solutions,” J. Nucl. Mater., 389, 179 (2009); https://doi.org/10.1016/j.jnucmat.2009.01.026.
- K. MORIMOTO et al., “Thermal Conductivities of Hypostoichiometric (U,Pu,Am)O2-X Oxide,” J. Nucl. Mater., 374, 378 (2008); https://doi.org/10.1016/j.jnucmat.2007.09.003.
- K. MORIMOTO et al., “Evaluation of Thermal Conductivity of (U,Pu,Am)O2-X,” Trans. Am. Nucl. Soc., 97, 618 (2007).
- M. KATO et al., “Physical Properties and Irradiation Behavior Analysis of Np- and Am-Bearing MOX Fuels,” J. Nucl. Sci. Technol., 48, 646 (2011); https://doi.org/10.1080/18811248.2011.9711745.
- D. R. OLANDER, “Fundamental Aspects of Nuclear Reactor Fuel Elements,” TID-26711-P1, p. 155, Energy Research and Development Administration (1976).
- S. NAKAMICHI, M. KATO, and T. TAMURA, “Influences of Am and Np on Oxygen Potentials of MOX Fuels,” Calphad, 35, 648 (2011); https://doi.org/10.1016/j.calphad.2011.06.002.
- F. A. NICHOLS, “Theory of Columnar Grain Growth and Central Void Formation in Oxide Fuel Rods,” J. Nucl. Mater., 22, 214 (1967); https://doi.org/10.1016/0022-3115(67)90031-1.
- P. F. SENS, “The Kinetics of Pore Movement in UO2 Fuel Rods,” J. Nucl. Mater., 43, 293 (1972); https://doi.org/10.1016/0022-3115(72)90061-X.
- M. INOUE et al., “Power-to-Melts of Uranium-Plutonium Oxide Fuel Pins at a Beginning-of-Life Condition in the Experimental Fast Reactor JOYO,” J. Nucl. Mater., 323, 108 (2003); https://doi.org/10.1016/j.jnucmat.2003.08.030.
- T. OZAWA and T. ABE, “Development and Verifications of Fast Reactor Fuel Design Code CEPTAR,” Nucl. Technol., 156, 39 (2006); https://doi.org/10.13182/NT156-39.