References
- F. KAMIL, “Fukushima Nuclear Accident,” Decouverte (Paris), 42, 373, 28 (2011).
- J. CARMACK et al., “Overview of the US DOE Accident Tolerant Fuel Development Program,” Proc. Top Fuel 2013, Charlotte, North Carolina (2013).
- L. J. OTT, K. R. ROBB, and D. WANG, “Preliminary Assessment of Accident-Tolerant Fuels on LWR Performance During Normal Operation and Under DB and BDB Accident Conditions,” J. Nucl. Mater., 448, 520 (2014); https://doi.org/10.1016/j.jnucmat.2013.09.052.
- J. WANG et al., “Comparison of CORA and MELCOR Core Degradation Simulation and the MELCOR Oxidation Model,” Nucl. Eng. Des., 276, 191 (2014); https://doi.org/10.1016/j.nucengdes.2014.05.041.
- S. J. ZINKLE et al., “Accident Tolerant Fuels for LWRs: A Perspective,” J. Nucl. Mater., 448, 374 (2014); https://doi.org/10.1016/j.jnucmat.2013.12.005.
- B. A. PINT et al., “High Temperature Oxidation of Fuel Cladding Candidate Materials in Steam–Hydrogen Environments,” J. Nucl. Mater., 440, 420 (2013); https://doi.org/10.1016/j.jnucmat.2013.05.047.
- Y.-H. KOO et al., “KAERI’s Development of LWR Accident-Tolerant Fuel,” Nucl. Technol., 186, 295 (2014); https://doi.org/10.13182/NT13-89.
- K. YUEH and K. A. TERRANI, “Silicon Carbide Composite for Light Water Reactor Fuel Assembly Applications,” J. Nucl. Mater., 448, 380 (2014); https://doi.org/10.1016/j.jnucmat.2013.12.004.
- M. KAZIMI, “Development of Accident Tolerant Fuel Options for Near Term Applications” Nuclear Energy University Program, U.S. Department of Energy (2015).
- J. WANG et al., “Accident Tolerant Clad Material Modeling by MELCOR: Benchmark for SURRY Short Term Station Blackout,” Nucl. Eng. Des., 313, 458 (2017); https://doi.org/10.1016/j.nucengdes.2017.01.002.
- J. WANG et al., “Comparison of Hydrogen Generation Rate Between CORA-13 Test and MELCOR Simulation: Clad Solid-Phase Oxidation Models Using Self-Developed Code MYCOAC,” Nucl. Technol., 192, 1, 25 (2017); https://doi.org/10.13182/NT14-96.
- J. WANG et al., “Accident Tolerance Cladding Thermal Hydraulic Simulation and Oxidation Kinetic Sensitivity Analysis,” Proc. Int. Conf. Nuclear Engineering, Shanghai, China (2017).
- J. WANG, T. C. HASKIN, and M. L. CORRADINI, “Severe Accident Progression and the Effects of Accident Tolerant Cladding,” Proc. 17th Int. Top. Mtg. on Nuclear Reactor Thermal Hydraulics, Xi’an, China, September 3–8, 2017.
- N. E. BIXLER, J. D. BREWER, and R. O. GAUNTT, “State-of-the-Art Reactor Consequence Analysis (SOARCA) Project Best Modeling Practices Volume IV,” NUREG, SAND2008P (2008).
- X. WU, T. KOZLOWSKI, and J. D. HALES, “Neutronics and Fuel Performance Evaluation of Accident Tolerant FeCrAl Cladding Under Normal Operation Conditions,” Ann. Nucl. Energy, 85, 763 (2015); https://doi.org/10.1016/j.anucene.2015.06.032.
- B. J. MERRILL and S. M. BRAGG-SITTON, “SiC Modifications to MELCOR for Severe Accident Analysis Applications,” Idaho National Laboratory (2013).
- J. WANG et al., “MELCOR Simulation of Core Thermal Response During a Station Blackout Initiated Severe Accident in China Pressurized Reactor (CPR1000),” Prog. Nucl. Energy, 81, 6 (2015); https://doi.org/10.1016/j.pnucene.2014.12.008.
- Y. LEE and M. S. KAZIMI, “A Structural Model for Multi-Layered Ceramic Cylinders and Its Application to Silicon Carbide Cladding of Light Water Reactor Fuel,” J. Nucl. Mater., 458, 87 (2015); https://doi.org/10.1016/j.jnucmat.2014.12.013.
- K. R. ROBB, J. W. McMURRAY, and K. A. TERRANI, “Severe Accident Analysis of BWR Core Fueled with UO2/FeCrAl with Updated Materials and Melt Properties from Experiment,” Oak Ridge National Laboratory (2016).
- R. GAUNTT, “MELCOR Computer Code Manuals, Vol. 1: Primer and Users’ Guide, Version 1.8. 6 September 2005,” Sandia National Laboratories (2005).
- “MELCOR Computer Code Manuals,” NUREG/CR-6119, Vol. 2, Rev. 4, Sandia National Laboratories (2008).
- V. F. URBANIC and T. R. HEIDRICK, “High-Temperature Oxidation of Zircaloy-2 and Zircaloy-4 in Steam,” J. Nucl. Mater., 75, 251 (1978); https://doi.org/10.1016/0022-3115(78)90006-5.