References
- H. M. SALEH and H. A. SHATTA, “Immobilization of Simulated Borate Radioactive Waste Solution in Cement-Poly (Methylmethacrylate) Composite: Mechanical and Chemical Characterizations,” J. Nucl. Chem., 2013, 1 (2013); https://doi.org/10.1155/2013/749505.
- R. J. M. KONINGS et al., “Predicting Material Release During a Nuclear Reactor,” Accident. Nat. Mater., 14, 3, 247 (2015); https://doi.org/10.1038/nmat4224.
- Radioactive Waste Management and Contaminated Site Clean-Up: Processes, Technologies and International Experience, 1st ed., W. E. LEE et al., Eds., Woodhead, Cambridge (2013).
- J. N. MEEGODA et al., “Waste Immobilization Technologies,” Pract. Period. Hazard. Toxic Radioact. Waste Manag., 7, 1, 46 (2003); https://doi.org/10.1061/(ASCE)1090-025X(2003)7:1(46).
- M. I. OJOVAN and W. E. LEE, An Introduction to Nuclear Waste Immobilisation, 2nd ed., Elsevier Science, Amsterdam (2005).
- Stabilization and Solidification of Hazardous, Radioactive and Mixed Wastes, 1st ed., R. D. SPENCE and C. SHI Eds., CFC Press, Boca Raton, Florida (2005).
- Z. DRACE and M. I. OJOVAN, “The Behaviours of Cementitious Materials in Long Term Storage and Disposal: An Overview of Results of the IAEA Coordinated Research Programme,” Mater. Res. Soc. Symp. Proc., 1193, 663 (2009); https://doi.org/10.1557/PROC-1193-663.
- M. LE ROUZIC et al., “Mechanisms of K-Struvite Formation in Magnesium Phosphate Cements,” Cem. Concr. Res., 91, 117 (2017); https://doi.org/10.1016/j.cemconres.2016.11.008.
- L. J. GARDNER et al., “Characterisation of Magnesium Potassium Phosphate Cements Blended with Fly Ash and Ground Granulated Blast Furnace Slag,” Cem. Concr. Res., 74, 78 (2015); https://doi.org/10.1016/j.cemconres.2015.01.015.
- A. S. WAGH, Chemically Bonded Phosphate Ceramics Twenty-First Century Materials with Diverse Applications, 1st ed., Elsevier Science, New York (2004).
- M. ANDERSON and M. RILEY, “PaveMendTM as a Solution for Rapid Runway Repair,” Proc. 27th Int. Air Transportation Conf. 2002, Orlando, Florida, June 30–July 3, 2002.
- Q. YANG et al., “Characteristics and Durability Test of Magnesium Phosphate Cement-Based Material for Rapid Repair of Concrete,” Mater. Struct., 33, 4, 229 (2000); https://doi.org/10.1007/BF02479332.
- J. E. SHOENBERGER et al., “Expedient Repair Materials for Roadway Pavements,” ERDC/GSL 05-07, Geotechnical and Structures Laboratory, U.S. Army Engineer Research and Development Center (2005).
- F. MILLERO, Chemical Oceanography, 4th ed., CRC Press, Boca Raton, Florida (2013).
- D. R. KESTER et al., “Preparation of Artificial Seawater,” Limnol. Oceanogr., 12, 1, 176 (1967); https://doi.org/10.4319/lo.1967.12.1.0176.
- L.-J. LIU et al., “Tailoring the Strength and Porosity of Rapid-Hardening Magnesia Phosphate Paste via the Pre-Foaming Method,” Sci. Rep., 5, 13016 (2015); https://doi.org/10.1038/srep13016.
- F. MONTES et al., “A New Test Method for Porosity Measurements of Portland Cement Pervious Concrete,” J. ASTM Int., 2, 1, 1 (2005); https://doi.org/10.1520/JAI12931.
- J. A. GRUBB et al., “Testing pH of Concrete—Need for a Standard Procedure,” Concr. Int., 29, 4, 78 (2007).
- D. V. RIBEIRO and M. R. MORELLI, “Influence of the Addition of Grinding Dust to a Magnesium Phosphate Cement Matrix,” Constr. Build. Mater., 23, 9, 3094 (2009); https://doi.org/10.1016/j.conbuildmat.2009.03.013.
- E. A. KISHAR et al., “Effect of Calcium Chloride on the Hydration Characteristics of Ground Clay Bricks Cement Pastes,” Beni-Suef Univ. J. Basic Appl. Sci., 2, 1, 20 (2013); https://doi.org/10.1016/j.bjbas.2013.09.003.
- R. O. A. RAHMAN et al., Cementitious Materials for Nuclear Waste Immobilization, 1st ed., John Wiley and Sons, Ltd, Chichester (2014).
- S. B. ESKANDER et al., “Immobilization of Low and Intermediate Level of Organic Radioactive Wastes in Cement Matrices,” J. Hazard. Mater., 190, 1–3, 969 (2011); https://doi.org/10.1016/j.jhazmat.2011.04.036.
- Z. D. McClure and P. C. CRISTINA, “Processing and Characterization of Sol-Gel Cerium Oxide Microspheres,” No. PNNL-25863, Pacific Northwest National Lab (2016).
- J. M. CHIANG et al., “Surrogate Formulations for Thermal Treatment of Low-Level Mixed Waste, Part III: Plasma Hearth Process Testing,” No. DOE/MWIP-17, ORNL/M-3641, Oak Ridge K-25 Site (1994).
- M. S. SAYED and N. HAFEZ, “Physico-Chemical Studies Involving Incorporation of Radioactive and Industrial Waste in Cement-Epoxy Resin Matrix,” Int. Conf. Hazardous Waste, Cairo, Egypt, December 12–16, 1998.
- J. HU et al., “Influence of Cement Fineness and Water-to-Cement Ratio on Mortar Early-Age Heat of Hydration and Set Times,” Constr. Build. Mater., 50, 15, 657 (2014); https://doi.org/10.1016/j.conbuildmat.2013.10.011.
- A. WANG et al., “Effect of Raw Material Ratios on the Compressive Strength of Magnesium Potassium Phosphate Chemically Bonded Ceramics,” Mater. Sci. Eng. C, 33, 8, 5058 (2013); https://doi.org/10.1016/j.msec.2013.08.031.
- A. COVILL et al., “Development of Magnesium Phosphate Cements for Encapsulation of Radioactive Waste,” Adv. Appl. Ceram., 110, 3, 151 (2011); https://doi.org/10.1179/1743676110Y.0000000008.
- C. McCAGUE et al., “Magnesium Phosphate Cement as a Potential Alternative for Encapsulation of Nuclear Wastes Containing Aluminum,” Proc. 31st Cement and Concrete Science Conf. 2011, London, United Kingdom, September 12–13, 2011.
- T. C. MADHAVI and S. ANNAMALAI, “Electrical Conductivity of Concrete,” ARPN J. Eng. Appl. Sci., 11, 9, 5979 (2006).
- H. SALLEHI, “Characterization of Cement Paste in Fresh State Using Electrical Resistivity Technique,” MASc Thesis, Civil and Environmental Engineering, Carleton University, Ottawa, Canada (2015).