References
- S. J. ZINKLE et al., “Accident Tolerant Fuels for LWRs: A Perspective,” J. Nucl. Mater., 448, 1–3, 374 (2014); https://doi.org/10.1016/j.jnucmat.2013.12.005.
- J. WANG et al., “MELCOR Simulation of Core Thermal Response During a Station Blackout Initiated Severe Accident in China Pressurized Reactor (CPR1000),” Prog. Nucl. Energy, 81, 6 (2015); https://doi.org/10.1016/j.pnucene.2014.12.008.
- H. BAO et al., “Safe Reactor Depressurization Windows for BWR Mark I Station Blackout Accident Management Strategy,” Ann. Nucl. Energy, 114, 518 (2018); https://doi.org/10.1016/j.anucene.2017.12.063.
- J. CARMACK et al., “Overview of the US DOE Accident Tolerant Fuel Development Program,” Idaho National Laboratory (2013).
- K. A. TERRANI, “Accident Tolerant Fuel Cladding Development: Promise, Status, and Challenges,” J. Nucl. Mater., 501, 13 (2018); https://doi.org/10.1016/j.jnucmat.2017.12.043.
- M. KAZIMI, “Development of Accident Tolerant Fuel Options for Near Term Applications, in Nuclear Energy University Program, U.S. Department of Energy,” Massachusetts Institute of Technology (2015).
- J. WANG, T. HASKIN, and M. CORRADINI, “Severe Accident Progression and the Effects of Accident Tolerant Cladding,” presented at the 17th Int. Topl. Mtg. on Nuclear Reactor Thermal Hydraulics, Xi’an, China, September 3–8, 2017.
- R. GAUNTT et al., “MELCOR Computer Code Manuals, in Sandia National Laboratories, Albuquerque, NM,” NUREG/CR, Sandia National Laboratories (2000).
- J. WANG et al., “Accident Tolerant Clad Material Modeling by MELCOR: Benchmark for Surry Short Term Station Black Out,” Nucl. Eng. Des., 313, 458 (2017); https://doi.org/10.1016/j.nucengdes.2017.01.002.
- J. WANG, H. JO, and M. CORRADINI, “Potential Recovery Actions from a Severe Accident in a PWR: MELCOR Analysis of a Station Blackout Scenario,” Nucl. Technol., 204, 1, 1 (2018); https://doi.org/10.1080/00295450.2018.1464838.
- L. J. OTT, K. R. ROBB, and D. WANG, “Preliminary Assessment of Accident-Tolerant Fuels on LWR Performance During Normal Operation and Under DB and BDB Accident Conditions,” J. Nucl. Mater., 448, 1–3, 520 (2014); https://doi.org/10.1016/j.jnucmat.2013.09.052.
- K. R. ROBB, M. HOWELL, and L. J. OTT, “Parametric and Experimentally Informed BWR Severe Accident Analysis Using FeCrAl,” Oak Ridge National Laboratory (2017).
- B. J. MERRILL and S. M. BRAGG-SITTON, “Status Report of Advanced Cladding Modeling Work to Assess Cladding Performance Under Accident Conditions,” Idaho National Laboratory (2013).
- P. W. HUMRICKHOUSE and B. J. MERRILL, “Status Report on Modifications to MELCOR for Modeling of Accident Tolerant Fuel (ATF),” Idaho National Laboratory (2017).
- P. W. HUMRICKHOUSE and B. J. MERRILL, “Modification to MELCOR 1.8.6 for Modeling Accident Tolerant Fuel in Boiling Water Reactors,” Idaho National Laboratory (2018).
- N. BIXLER, J. BREWER, and R. GAUNTT, “State-of-the-Art Reactor Consequence Analysis (SOARCA),” Project Best Modeling Practices, Volume IV, NUREG SAND2008P, Sandia National Laboratories (2008).
- M. ŠEVEČEK et al., “Development of Cr Cold Spray–Coated Fuel Cladding with Enhanced Accident Tolerance,” Nucl. Eng. Technol., 50, 2, 229 (2018); https://doi.org/10.1016/j.net.2017.12.011.
- M. WAGIH et al., “Fuel Performance of Chromium-Coated Zirconium Alloy and Silicon Carbide Accident Tolerant Fuel Claddings,” Ann. Nucl. Energy, 120, 304 (2018); https://doi.org/10.1016/j.anucene.2018.06.001.
- J.-C. BRACHET et al., “Early Studies on Cr-Coated Zircaloy-4 as Enhanced Accident Tolerant Nuclear Fuel Claddings for Light Water Reactors,” J. Nucl. Mater., 517, 268 (2019); https://doi.org/10.1016/j.jnucmat.2019.02.018.
- M. MICHALIK, M. HÄNSEL, and W. J. QUADAKKERS, “Effect of Water Vapour on Growth and Adherence of Chromia Scales on Pure Chromium,” Forschungszentrum, Zentralbibliothek (2007).
- M. MICHALIK et al., “Effect of Water Vapour on Growth and Adherence of Chromia Scales Formed on Cr in High and Low pO2-environments at 1000 and 1050°C,” Mater. High Temp., 22, 3–4, 213 (2005); https://doi.org/10.1179/mht.2005.025.