Validation of Pronghorn Pressure Drop Correlations Against Pebble Bed Experiments

References

• I. PIORO and R. DUFFEY, “Current and Future Nuclear Power Reactors and Plants,” Managing Global Warming, pp. 117–197, Academic Press, Cambridge, Massachusetts (2019); https://doi.org/10.1016/B978-0-12-814104-5.00004-1.
   Google Scholar
• I. HORE-LACY, “The ‘Front End’ of the Nuclear Fuel Cycle,” Nuclear Energy in the 21st Century, pp. 55–74, Academic Press, Cambridge, Massachusetts (2006).
   Google Scholar
• M. RICHARDS and C. HAMILTON, “HTGR Economic/Business Analysis and Trade Studies Market Analysis for HTGR Technologies and Applications,” USNC-NIA- G00001/Rev.0, U.S. Department of Energy, Office of Nuclear Energy, Science, and Technology (2013); https://doi.org/10.2172/1210033.
   Google Scholar
• J. BECK and L. PINCOCK, “High Temperature Gas-Cooled Reactors Lessons Learned Applicable to the Next Generation Nuclear Plant,” INL/EXT-10-19329, Idaho National Laboratory (2011); https://doi.org/10.2172/1023461.
   Google Scholar
• T. WILSON JR. et al., “Advanced Control and Protection System Design Methods for Modular HTGRs,” ORNL/TM-2012/170, Oak Ridge National Laboratory (2012); https://doi.org/10.2172/1047629.
   Google Scholar
• H. REUTLER and G. LOHNERT, “Advantages of Going Modular in HTRs,” Nucl. Eng. Des., 78, 2, 129 (1984); https://doi.org/10.1016/0029-5493(84)90298-X.
   Web of Science ®Google Scholar
• Y. HASSAN and C. KANG, “Pressure Drop in a Pebble Bed Reactor Under High Reynolds Number,” Nucl. Technol., 180, 2, 159 (2012); https://doi.org/10.13182/NT12-A14631.
   Web of Science ®Google Scholar
• E. ERDIM, Ö. AKGIRAY, and İ. DEMIR, “A Revisit of Pressure Drop–Flow Rate Correlations for Packed Beds of Spheres,” Powder Technol., 283, 488 (2015); https://doi.org/10.1016/j.powtec.2015.06.017.
   Web of Science ®Google Scholar
• Z. GUO et al., “Influence of Confining Wall on Pressure Drop and Particle-to-Fluid Heat Transfer in Packed Beds with Small D/d Ratios Under High Reynolds Number,” Chem. Eng. Sci., 209, 115200 (2019); https://doi.org/10.1016/j.ces.2019.115200.
   Web of Science ®Google Scholar
• A. NOVAK et al., “Pronghorn Theory Manual,” INL/EXT- 18-44453-Rev001, Idaho National Laboratory (2020).
   Google Scholar
• J. LEE et al., “Pronghorn Fully Compressible Equation Set Validation Against SANA Open Plenum Experiments,” Proc. High Temperature Reactor Technology (HTR2021), Virtual Conf., June 2–5, 2021, American Nuclear Society (2021).
   Google Scholar
• J. LEE et al., “Pronghorn Porous Media Model Validation with Pressure Drop Measurements,” 19th Int. Topl. Mtg. on Nuclear Reactor Thermal Hydraulics (NURETH19), Virtual Conf., March 6–11, 2022, American Nuclear Society (2022).
   Google Scholar
• J. LEE et al., “Pebble Bed Reconstruction Using MATLAB Algorithms and VGSTUDIO with the Average Bed and Radial Porosity Analysis,” Nucl. Technol. (Submitted).
   Google Scholar
• M. QUINTARD, “Introduction to Heat and Mass Transport in Porous Media,” STO-EN-AVT-261, von Karman Institute for Fluid Dynamics (2015).
   Google Scholar
• J. BEAR, Dynamics of Fluids in Porous Media, Dover Publications, Inc, Mineola, New York (1988).
   Google Scholar
• M. YIO, H. WONG, and N. BUENFELD, “Representative Elementary Volume (REV) of Cementitious Materials from Three-Dimensional Pore Structure Analysis,” Cem. Concr. Res., 102, 187 (2017); https://doi.org/10.1016/j.cemconres.2017.09.012.
   Web of Science ®Google Scholar
• D. TAKHANOV, “Forchheimer Model for Non-Darcy Flow in Porous Media and Fractures,” MS Thesis, Imperial College London, Department of Earth Science and Engineering (2011).
   Google Scholar
• R. ZIMMERMAN et al., “Non-Linear Regimes of Fluid Flow in Rock Fractures,” Int. J. Rock Mech. Min. Sci., 41, 3, 163 (2004); https://doi.org/10.1016/j.ijrmms.2004.03.036.
   Web of Science ®Google Scholar
• Pronghorn Development and Analysis Group, “Pronghorn: A Coarse Mesh Thermal-Hydraulics Application Based on MOOSE for Advanced Reactor Concepts,” NUC Workshop—Innovations in Advanced Reactor Design, Analysis, and Licensing, Raleigh, North Carolina, September 18, North Carolina State University (2019).
   Google Scholar
• A. NOVAK et al., “Multiscale Thermal-Hydraulic Modeling of the Pebble Bed Fluoride-Salt-Cooled High-Temperature Reactor,” Ann. Nucl. Energy, 154, 107968 (2021); https://doi.org/10.1016/j.anucene.2020.107968.
   Web of Science ®Google Scholar
• “STAR-CCM+ User Guide 2021.1,” Siemens PLM Software Inc. (2021).
   Google Scholar
• A. NAKAYAMA and F. KUWAHARA, “A Macroscopic Turbulence Model for Flow in a Porous Medium,” J. Fluids Eng., 121, 2, 427 (1999); https://doi.org/10.1115/1.2822227.
   Web of Science ®Google Scholar
• T. SHIH et al., “A New k−ε Eddy Viscosity Model for High Reynolds Number Turbulent Flows,” Comput. Fluids, 24, 3, 227 (1995); https://doi.org/10.1016/0045-7930(94)00032-T.
   Web of Science ®Google Scholar
• M. SURENDRAN, “Computational Fluid Dynamic Modeling of Natural Convection in Vertically Heated Rods,” MS Thesis, Utah State University, Department of Mechanical Engineering (2016).
   Google Scholar
• D. ZHANG, “Comparison of Various Turbulence Models for Unsteady Flow Around a Finite Circular Cylinder at Re = 20000,” J. Phys. Conf. Ser., 910, 012027 (2017); https://doi.org/10.1088/1742-6596/910/1/012027.
   Google Scholar
• A. HADID, N. MANSOUR, and O. ZEMAN, “Single Point Modeling of Rotating Turbulent Flows,” N95-21060, National Aeronautics and Space Administration/Ames Research Center (1994).
   Google Scholar
• M. WOLFSHTEIN, “The Velocity and Temperature Distribution in One-Dimensional Flow with Turbulence Augmentation and Pressure Gradient,” Int. J. Heat Mass Transfer, 12, 3, 301 (1969); https://doi.org/10.1016/0017-9310(69)90012-X.
   Web of Science ®Google Scholar
• H. REICHARDT, “Vollständige Darstellung der Turbulenten Geschwindigkeitsverteilung in Glatten Leitungen,” J. Appl. Math. Mech., 31, 7, 208 (1951).
   Google Scholar
• D. C. WILCOX et al., Turbulence Modeling for CFD, DCW Industries, La Canada, California (1998).
   Google Scholar
• F. R. MENTER, “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications,” AIAA J., 32, 8, 1598 (1994); https://doi.org/10.2514/3.12149.
   Web of Science ®Google Scholar
• C. FREITAS, “The Issue of Numerical Uncertainty,” Appl. Math. Modell., 26, 2, 237 (2002); https://doi.org/10.1016/S0307-904X(01)00058-0.
   Web of Science ®Google Scholar
• R. JOHNSON, “Modeling Strategies for Unsteady Turbulent Flows in the Lower Plenum of the VHTR,” Nucl. Eng. Des., 238, 3, 482 (2008); https://doi.org/10.1016/j.nucengdes.2007.02.049.
   Web of Science ®Google Scholar
• W. OBERKAMPF and C. ROY, Verification and Validation in Scientific Computing, Cambridge University Press, Cambridge, United Kingdom (2010).
   Google Scholar
• A. RAKHIMOV, D. C. VISSER, and E. M. J. KOMEN, “Uncertainty Quantification Method for CFD Applied to the Turbulent Mixing of Two Water Layers—II: Deterministic Sampling for Input Uncertainty,” Nucl. Eng. Des., 348, 146 (2019); https://doi.org/10.1016/j.nucengdes.2019.04.016.
   Web of Science ®Google Scholar
• L. KWAŚNIEWSKI, “Application of Grid Convergence Index in FE Computation,” Bull. Pol. Acad. Sci.: Tech. Sci., 61, 1, 123 (2013); https://doi.org/10.2478/bpasts-2013-0010.
   Web of Science ®Google Scholar
• L. SCHWER, “Is Your Mesh Refined Enough? Estimating Discretization Error Using GCI,” 7th LS-DYNA Anwenderforum, Bamberg, Germany, September 30– October 1, 2008, DYNAmore GmbH (2008).
   Google Scholar
• I. CELIK et al., “Procedure for Estimation and Reporting of Uncertainty due to Discretization in CFD Applications,” J. Fluids Eng. Trans. ASME, 130, 7 (2008).
   Web of Science ®Google Scholar
• I. CELIK and O. KARATEKIN, “Numerical Experiments on Application of Richardson Extrapolation with Nonuniform Grids,” J. Fluids Eng. Trans. ASME, 119, 3, 584 (1997); https://doi.org/10.1115/1.2819284.
   Web of Science ®Google Scholar
• B. R. BALIGA and I. Y. LOKHMANETS, “Generalized Richardson Extrapolation Procedures for Estimating Grid-Independent Numerical Solutions,” Int. J. Numer. Methods Heat Fluid Flow, 26, 3/4, 1121 (2016); https://doi.org/10.1108/HFF-10-2015-0445.
   Web of Science ®Google Scholar
• A. RAKHIMOV, D. C. VISSER, and E. M. J. KOMEN, “Uncertainty Quantification Method for CFD Applied to the Turbulent Mixing of Two Water Layers,” Nucl. Eng. Des., 333, 1, 1 (2018); https://doi.org/10.1016/j.nucengdes.2018.04.004.
   Web of Science ®Google Scholar
• M. MCHALE, J. FRIEDMAN, and J. KARIAN, “Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer,” ASME V&V, 20, 1 (2009).
   Google Scholar
• D. ALTMAN and J. BLAND, “Statistics Notes: Standard Deviations and Standard Errors,” BMJ, 331, 7521, 903 (2005); https://doi.org/10.1136/bmj.331.7521.903.
   PubMed Web of Science ®Google Scholar
• H. COLEMAN and F. STERN, “Uncertainties and CFD Code Validation,” J. Fluids Eng., 119, 4, 795 (1997); https://doi.org/10.1115/1.2819500.
   Web of Science ®Google Scholar
• R. ABERNETHY, R. BENEDICT, and R. DOWDELL, “ASME Measurement Uncertainty,” J. Fluids Eng., 107, 2, 161 (1985); https://doi.org/10.1115/1.3242450.
   Web of Science ®Google Scholar
• K. MAUPIN, L. SWILER, and N. PORTER, “Validation Metrics for Deterministic and Probabilistic Data,” J. Verif. Valid. Uncertain. Quantif., 3, 3, 031002 (2018); https://doi.org/10.1115/1.4042443.
   Google Scholar
• T. PUJOL et al., “Effect of Wand-Type Underdrains on the Hydraulic Performance of Pressurised Sand Media Filters,” Biosyst. Eng., 192, 176 (2020); https://doi.org/10.1016/j.biosystemseng.2020.01.015.
   Web of Science ®Google Scholar
• M. PILOU et al., “Inertial Particle Deposition in a 90° Laminar Flow Bend: An Eulerian Fluid Particle Approach,” Aerosol Sci. Technol., 45, 11, 1376 (2011); https://doi.org/10.1080/02786826.2011.596171.
   Web of Science ®Google Scholar
• J. LEI, J. ZHANG, and L. ZHANG, “Numerical Simulation Study on Distribution of Bubble in Flow near Aerator Based on CFD-PBM Coupled Model in Tunnel,” Math. Probl. Eng., 2021, 6635856 (2021); https://doi.org/10.1155/2021/6635856.
   Web of Science ®Google Scholar
• S. HOSSEINI et al., “Estimation of the Minimum Spouting Velocity in Shallow Spouted Beds by Intelligent Approaches: Study of Fine and Coarse Particles,” Powder Technol., 354, 456 (2019); https://doi.org/10.1016/j.powtec.2019.06.025.
   Web of Science ®Google Scholar
• L. DEBNATH and P. MIKUSINSKI, Introduction to Hilbert Spaces with Applications, Academic Press, Burlington, Massachusetts (2005).
   Google Scholar
• J. GHOSH and R. RAMAMOORTHI, Bayesian Nonparametrics, Springer Science & Business Media, New York (2003).
   Google Scholar
• D. DARLING, “The Kolmogorov-Smirnov, Cramer-von Mises Tests,” Ann. Math. Statist., 28, 4, 823 (1957); https://www.jstor.org/stable/2237048.
   Google Scholar
• S. FERSON, W. OBERKAMPF, and L. GINZBURG, “Model Validation and Predictive Capability for the Thermal Challenge Problem,” Comput. Methods Appl. Mech. Eng., 197, 29–32, 2408 (2008); https://doi.org/10.1016/j.cma.2007.07.030.
   Web of Science ®Google Scholar
• R. MUYSHONDT et al., “Pressure Drop and Time-Resolved PIV Measurements of Near-Wall Flows in a Test Facility with Randomly Packed Spheres,” 19th Int. Topl. Mtg. on Nuclear Reactor Thermal Hydraulics (NURETH19), Virtual Conf., March 6–11, 2022 American Nuclear Society (2022).
   Google Scholar
• N. AMINI and Y. A. HASSAN, “An Investigation of Matched Index of Refraction Technique and Its Application in Optical Measurements of Fluid Flow,” Exp. Fluids, 53, 6, 2011 (2012); https://doi.org/10.1007/s00348-012-1398-x.
   Web of Science ®Google Scholar
• J. LEE, “Validation of Pronghorn Pressure Drop Correlations Against Pebble Bed Experiments,” PhD Thesis, Texas A&M University, Department of Nuclear Engineering (2022).
   Google Scholar
• T. XING and F. STERN, “Factors of Safety for Richardson Extrapolation,” J. Fluids Eng., 132, 6, 061403 (2010); https://doi.org/10.1115/1.4001771.
   Web of Science ®Google Scholar
• G. CUMMING, F. FIDLER, and D. L. VAUX, “Error Bars in Experimental Biology,” J. Cell Biol., 177, 1, 7 (2007); https://doi.org/10.1083/jcb.200611141.
   PubMed Web of Science ®Google Scholar
• G. CUMMING, “Inference by Eye: Reading the Overlap of Independent Confidence Intervals,” Stat. Med., 28, 2, 205 (2009); https://doi.org/10.1002/sim.3471.
   PubMed Web of Science ®Google Scholar
• D. M. LANE et al., Introduction to Statistics, Rice University, University of Houston Clear Lake, and Tufts University (2017).
   Google Scholar
• D. REGER et al., “Investigation of the Pressure Drop in Packed Beds Between Large Eddy Simulation and Multiple Correlations,” 19th Int. Topl. Mtg. on Nuclear Reactor Thermal Hydraulics (NURETH19), Virtual Conf., March 6–11, 2022, American Nuclear Society (2022).
   Google Scholar
• D. HANDLEY, “Momentum and Heat Transfer Mechanism in Regular Shaped Packing,” Trans. Inst. Chem. Eng., 46, T251 (1968).
   Google Scholar
• Kerntechnischen Ausschusses, “Reactor Core Design of High-Temperature Gas-Cooled Reactors. Part 3: Loss of Pressure Through Friction in Pebble Bed Cores,” KTA 3102.3, Nuclear Safety Standards Commission (1981).
   Google Scholar
• P. C. CARMAN, “Fluid Flow Through Granular Beds,” Chem. Eng. Res. Des., 75, S32 (1997); https://doi.org/10.1016/S0263-8762(97)80003-2.
   Web of Science ®Google Scholar
• R. JESCHAR, “Druckverlust in Mehrkornschüttungen aus Kugeln,” Archiv für das Eisenhüttenwesen, 35, 2, 91 (1964); https://doi.org/10.1002/srin.196402300.
   Google Scholar
• D. JONES and H. KRIER, “Gas Flow Resistance Measurements Through Packed Beds at High Reynolds Numbers,” J. Fluids Eng., 105, 2, 168 (1983); https://doi.org/10.1115/1.3240959.
   Web of Science ®Google Scholar
• R. HICKS, “Pressure Drop in Packed Beds of Spheres,” Ind. Eng. Chem. Fundam., 9, 3, 500 (1970); https://doi.org/10.1021/i160035a032.
   Web of Science ®Google Scholar
• C. WENTZ JR. and G. THODOS, “Pressure Drops in the Flow of Gases Through Packed and Distended Beds of Spherical Particles,” AlChE J., 9, 1, 81 (1963); https://doi.org/10.1002/aic.690090118.
   Web of Science ®Google Scholar
• W. REICHELT, “Zur Berechnung des Druckverlustes Einphasig Durchströmter Kugel-und Zylinderschüttungen,” Chem. Ing. Tech., 44, 18, 1068 (1972); https://doi.org/10.1002/cite.330441806.
   Web of Science ®Google Scholar
• B. EISFELD and K. SCHNITZLEIN, “The Influence of Confining Walls on the Pressure Drop in Packed Beds,” Chem. Eng. Sci., 56, 14, 4321 (2001); https://doi.org/10.1016/S0009-2509(00)00533-9.
   Web of Science ®Google Scholar
• W. P. JONES and B. E. LAUNDER, “The Prediction of Laminarization with a Two-Equation Model of Turbulence,” Int. J. Heat Mass Transfer, 15, 2, 301 (1972); https://doi.org/10.1016/0017-9310(72)90076-2.
   Web of Science ®Google Scholar