References
- T. ZHOU et al., “Application and Development of Passive Technology in Nuclear Power Units,” Proc. CSEE, 33, 8, 81 (2013) (in Chinese); https://doi.org/10.13334/j.0258-8013.pcsee.2013.08.014.
- C. LI, “Study The Heat Transfer Characteristics and Verify the Heat Exchanger Model of Passive Residual Heat Removal Heat Exchanger,” MS Thesis, Harbin Engineering University, College of Nuclear Science and Technology (Mar. 2013) (in Chinese).
- F. LI et al., “Demonstration of Passive Residual Heat Removal System on HPR1000 Secondary Side,” Nucl. Power Eng., 40, S1, 28 (2019) (in Chinese); https://doi.org/10.13832/j.jnpe.2019.S1.0028.
- H. YUAN et al., “Failure Mode and Influence Analysis of PRS Heat Exchanger,” Sci. Technol. Vis., 11, 124 (2020) (in Chinese); https://doi.org/10.19694/j.cnki.2095-2457.2020.11.044.
- T. ZHOU et al., “The Development and Study on Passive Natural Circulation,” Nucl. Saf., 12, 3, 32 (2013) (in Chinese); https://doi.org/10.16432/j.cnki.1672-5360.2013.03.015.
- G. XIE et al., “Calculation of Physical Failure Probability of HTR-10 Residual Heat Removal System by Monte Carlo Method,” Nucl. Power Eng., 29, 2, 85 (2008) (in Chinese).
- L. XIAO et al., “Calculation of Physical Process Failure Probability of Passive Systems in NDR by Adaptive Monte Carlo Method,” Nucl. Power Eng., 31, 1, 31 (2010) (in Chinese).
- D. LU et al., “Experimental Investigation on Natural Convection Heat Transfer Characteristics of C-shape Heating Rods Bundle Used in PRHR HX,” Ann. Nucl. Energy, 98, 226 (2016); https://doi.org/10.1016/j.anucene.2016.08.009.
- X. PAN, “Numerical Study and Sensitivity Analysis of PRHR HX Transient Heat Transfer Performance,” Nucl. Power Eng., 31, S1, 97 (2010) (in Chinese).
- H. XIA, “Numerical Simulation and Optimized Design on Passive Residual Heat Removal Heat Exchanger in AP1000,” MS Thesis, North China Electric Power University, School of Nuclear Science and Engineering (Mar. 2013) (in Chinese).
- R. XUE, C. DENG, and M. PENG, “Numerical Simulation of Passive Residual Heat Removal Heat Exchanger,” At. Energy Sci. Technol., 44, 4, 429 (2010) (in Chinese).
- T. MING, W. LIU, and W. WANG, “CFD Simulation of Natural Convection Circuits Among Tube Bundle in Residual Heat Removal Exchanger,” J. Huazhong Univ. Sci. Technol., 31, 9, 9 (2003) (in Chinese); https://doi.org/10.13245/j.hust.2003.09.004.
- Y. SONG, W. LI, and S. LI, “Natural Convection Simulation of Passive Residual Heat Removal Heat Exchanger,” At. Energy Sci. Technol., 46, S 2, 767 (2012) (in Chinese).
- B. JIA et al., “Numerical Simulation of PRHR System Based on CFD,” Nucl. Saf., 12, 3, 37 (2013) (in Chinese); https://doi.org/10.16432/j.cnki.1672-5360.2013.03.016.