References
- T. ABRAM and S. ION, “Generation-IV Nuclear Power: A Review of the State of the Science,” Energy Policy, 36, 12, 4323 (2008); https://doi.org/10.1016/j.enpol.2008.09.059.
- P. YANG et al., “The Conceptual Design of Thorium-Based Molten Salt Energy Amplifier,” Int. J. Energy Res., 45, 8, 12059 (2021); https://doi.org/10.1002/er.6036.
- K. FURUKAWA et al., “Thorium Molten-Salt Nuclear Energy Synergetics,” J. Nucl. Sci. Technol., 27, 12, 1157 (1990); https://doi.org/10.1080/18811248.1990.9731310.
- V. V. IGNAT’EV et al., “Analysis of the Fuel-Loop Characteristics of a Molten-Salt Nuclear Reactor with a Cavity Core,” At. Energy, 126, 3, 156 (2019); https://doi.org/10.1007/s10512-019-00530-4.
- H. ROUCH et al., “Preliminary Thermal-Hydraulic Core Design of the Molten Salt Fast Reactor (MSFR),” Ann. Nucl. Energy, 64, 449 (2014); https://doi.org/10.1016/j.anucene.2013.09.012.
- P. N. HAUBENREICH and J. R. ENGEL, “Experience with the Molten-Salt Reactor Experiment,” Nucl. Appl. Technol., 8, 2, 118 (1970); https://doi.org/10.13182/NT8-2-118.
- D. L. ZHANG et al., “Review of Conceptual Design and Fundamental Research of Molten Salt Reactors in China,” Int. J. Energy Res., 42, 5, 1834 (2018); https://doi.org/10.1002/er.3979.
- S. H. YU et al., “Study on Core Physical Parameters for Molten Salt Experimental Reactor,” Nucl. Techniques, 42, 3, 75 (2019); https://doi.org/10.11889/j.0253-3219.2019.hjs.42.030604.
- V. N. DESYATNIK et al., “Melting Diagrams of Ternary Systems Containing Sodium and Potassium Chlorides, Thorium Tetrachloride, and Plutonium Trichloride,” Soviet At. Energy, 38, 3, 219 (1975); https://doi.org/10.1007/BF01666673.
- A. I. SURENKOV et al., “Corrosion Resistance and Mechanical Stability of Nickel Alloys in Molten-Salt Nuclear Reactors,” At. Energy, 124, 1, 43 (2018); https://doi.org/10.1007/s10512-018-0372-y.
- G. J. JANZ et al., “Molten Salts: Volume 4, Part 2, Chlorides and Mixtures—Electrical Conductance, Density, Viscosity, and Surface Tension Data,” J. Phys. Chem. Ref. Data, 4, 871 (1975); https://doi.org/10.1063/1.555527.
- W. R. GRIMES, “Reactor Chemistry Division Annual Progress Report for Period Ending December 31, 1965,” Oak Ridge National Laboratory (1966); https://doi.org/10.2172/4547015.
- R. V. G. RAO and A. SATPATHY, “On the Evaluation of Entropy and Thermodynamic Properties of 1:1 Type of Molten Salts through the Generalized Debye Inverse Screening Length,” Phys. Status Solidi B, 150, 1, 53 (1988); https://doi.org/10.1002/pssb.2221500108.
- J. P. M. VAN DER MEER and R. J. M. KONINGS, “Thermal and Physical Properties of Molten Fluorides for Nuclear Applications,” J. Nucl. Mater., 360, 1, 16 (2007); https://doi.org/10.1016/j.jnucmat.2006.08.010.
- B. YAMAJI et al., “Thermal-Hydraulic Analyses and Experimental Modelling of MSFR,” Ann. Nucl. Energy, 64, 457 (2014); https://doi.org/10.1016/j.anucene.2013.09.011.
- J. J. ZHOU et al., “The Influence of Lower Plenum and Distribution Plates to Thermal Hydraulics Characteristics of MSR,” Nucl. Eng. Des., 256, 235 (2013); https://doi.org/10.1016/j.nucengdes.2012.11.004.