References
- M. ANDURKAR et al., “Effects of Build Orientation and Heat Treatment on Neutron Irradiation Hardening in Inconel 625 Fabricated via Laser Powder Bed Fusion,” Proc. 2021 Annual Int. Solid Freeform Fabrication Symp.—An Additive Manufacturing Conf., August 2–4, 2021, University of Texas at Austin ( 2021); https://doi.org/10.26153/tsw/17624.
- J. SCHWANTES et al., “Changing the Rules of the Game: Used Fuel Studies Outside of a Remote Handling Facility,” J. Radioanal. Nucl. Chem., 322, 3, 1267 (2019); https://doi.org/10.1007/s10967-019-06921-y.
- O. WOO et al., “The Microstructure of Unirradiated and Neutron Irradiated Inconel X750,” Microsc. Microanal., 17, 2, 1852 (2011); https://doi.org/10.1017/s1431927611010130.
- C. JUDGE et al., “Coupling Multi-scale Mechanical Testing Techniques with FIB and TEM Characterization to Reveal Mechanisms of Embrittlement of High Dose Inconel X-750,” Microsc. Microanal., 25, 2, 1586 (2019); https://doi.org/10.1017/s1431927619008663.
- T. BYUN and K. FARRELL, “Tensile Properties of Inconel 718 After Low Temperature Neutron Irradiation,” J. Nucl. Mater., 318, 292 (2003); https://doi.org/10.1016/s0022-3115(03)00006-0.
- F. WIFFEN, “Response of Inconel 600 to Simulated Fusion Reactor Irradiation,” Effects of Radiat. Struct. Mater., 88 (1979); https://doi.org/10.1520/stp38160s.
- P. PANT, “Residual Stress Distributions in Additively Manufactured Parts—Effect of Build Orientation,” Licentiate Thesis no. 1869, Linköping University, Division of Engineering Materials, Department of Management and Engineering (2020).
- “Focused Ion Beam Sample Holder, FIB Lift-Out Grids, Silicon Aperture Frames,” Tedpella.com (2021); https://www.tedpella.com/grids_html/4510half.htm.aspx#_21490-10 (current as of Feb. 20, 2022).
- X. LIU, F. YUAN, and Y. WEI, “Grain Size Effect on the Hardness of Nanocrystal Measured by the Nanosize Indenter,” Appl. Surf. Sci., 279, 159 (2013); https://doi.org/10.1016/j.apsusc.2013.04.062.