Investigation on Residual Stress in SA508/Inconel Metal/CF8A Dissimilar Welded Joint for Nuclear Steam Generator Safe End Using Different Processes

References

• D. W. RATHOD et al., “Effect of Buffer-Layered Buttering on Microstructure and Mechanical Properties of Dissimilar Metal Weld Joints for Nuclear Plant Application,” Mater. Sci. Eng. A, 666, 100 (2016); https://doi.org/10.1016/j.msea.2016.04.053.
   Web of Science ®Google Scholar
• H. MING et al., “Microstructure of a Safe-End Dissimilar Metal Weld Joint (SA508-52-316L) Prepared by Narrow-Gap GTAW,” Mater. Charact., 123, 233 (2017); https://doi.org/10.1016/j.matchar.2016.11.029.
   Web of Science ®Google Scholar
• B. ÇEVIK, “Effect of Welding Processes on Mechanical and Microstructural Properties of S275 Structural Steel Joints,” Mater. Testing, 60, 863 (2018); https://doi.org/10.3139/120.111225.
   Web of Science ®Google Scholar
• J. ZHANG et al., “Characterization of Newly Developed Friction Stir-Arc Welding Method for AM60/AZ31 Dissimilar Mg Alloy,” Mater. Sci. Eng. A, 800, 140320 (2021); https://doi.org/10.1016/j.msea.2020.140320.
   Web of Science ®Google Scholar
• A. R. MURTHY et al., “Crack Growth Analysis and Remaining Life Prediction of Dissimilar Metal Pipe Weld Joint with Circumferential Crack Under Cyclic Loading,” Nucl. Eng. Tech., 52, 2949 (2020); https://doi.org/10.1016/j.net.2020.06.001.
   Web of Science ®Google Scholar
• H. MOSHAYEDI and I. SATTARI-FAR, “Numerical and Experimental Study of Nugget Size Growth in Resistance Spot Welding of Austenitic Stainless Steels,” J. Mater. Process. Technol., 212, 347 (2012); https://doi.org/10.1016/j.jmatprotec.2011.09.004.
   Web of Science ®Google Scholar
• D. ZHAO et al., “Modeling and Process Analysis of Resistance Spot Welded DP600 Joints Based on Regression Analysis,” Mater. Des., 110, 676 (2016); https://doi.org/10.1016/j.matdes.2016.08.038.
   Web of Science ®Google Scholar
• G. DAK and C. PANDEY, “A Critical Review on Dissimilar Welds Joint Between Martensitic and Austenitic Steel for Power Plant Application,” J. Manuf. Processes, 58, 377 (2020); https://doi.org/10.1016/j.jmapro.2020.08.019.
   Web of Science ®Google Scholar
• T.-K. SONG et al., “Prediction of Welding Residual Stress Profile in Dissimilar Metal Nozzle Butt Weld of Nuclear Power Plant,” Procedia Mat. Sci., 3, 784 (2014); https://doi.org/10.1016/j.mspro.2014.06.128.
   Google Scholar
• E. M. DEHAGHI et al., “Residual Stresses Due to Cladding, Buttering and Dissimilar Welding of the Main Feed Water Nozzle in a Power Plant Reactor,” Int. J. Pres. Ves. Pip., 152, 56 (2017); https://doi.org/10.1016/j.ijpvp.2017.05.009.
   Web of Science ®Google Scholar
• T.-K. SONG et al., “The Safe-End Length Effect on Welding Residual Stresses in Dissimilar Metal Welds of Surge Nozzles,” Eng. Fract. Mech., 78, 1957 (2011); https://doi.org/10.1016/j.engfracmech.2011.03.007.
   Web of Science ®Google Scholar
• L. Y. XU et al., “Prediction of Residual Stresses in Electron Beam Welded Ti-6Al-4V Plates,” Mater. Testing, 59, 323 (2017); https://doi.org/10.3139/120.111005.
   Web of Science ®Google Scholar
• L. XU et al., “Finite Element Analysis of Calibration Coefficients for Residual Stress Measurements by the Ring Core Procedure,” Mater. Testing, 56, 923 (2014); https://doi.org/10.3139/120.110652.
   Web of Science ®Google Scholar
• G. LI et al., “Stress Corrosion Cracking Behavior of Dissimilar Metal Weld A508/52M/316L in High Temperature Water Environment,” Acta Metall. Sinica., 47, 797 (2011).
   Web of Science ®Google Scholar
• T. TERACHI, K. FUJII, and K. ARIOKA, “Microstructural Characterization of SCC Crack Tip and Oxide Film for SUS 316 Stainless Steel in Simulated PWR Primary Water at 320°C,” J. Nucl. Sci. Technol., 42, 225 (2005); https://doi.org/10.1080/18811248.2005.9726383.
   Web of Science ®Google Scholar
• Y. LU et al., “Corrosion Behavior of Pipeline Steel Welds in Simulated Produced Water with Different CO2 Partial Pressures Under High Temperature,” Mater. Testing, 59, 348 (2017); https://doi.org/10.3139/120.111013.
   Web of Science ®Google Scholar
• Y. WADA et al., “Intergranular Stress Corrosion Cracking Initiation Model of Austenite Stainless Steels Used in BWRs for Optimized Water Chemistry Control,” J. Nucl. Sci. Technol., 50, 546 (2013); https://doi.org/10.1080/00223131.2013.785266.
   Web of Science ®Google Scholar
• W. C. DONG, D. B. GAO, and S. P. LU, “Numerical Investigation on Residual Stresses of the Safe-End/Nozzle Dissimilar Metal Welded Joint in CAP1400 Nuclear Power Plants,” Acta Metall. Sin., 32, 618 (2019); https://doi.org/10.1007/s40195-018-0803-8.
   Web of Science ®Google Scholar
• L. E. LINDGREN, H. RUNNEMALM, and M. O. NÄSSTRÖM, “Simulation of Multipass Welding of a Thick Plate,” Int. J. Numer. Meth. Eng., 44, 1301 (2015); https://doi.org/10.1002/(SICI)1097-0207(19990330)44:9<1301::AID-NME479>3.0.CO;2-K.
   Google Scholar
• L. ZHAO et al., “Numerical Simulation on the Effect of Welding Parameters on Welding Residual Stresses in T92/S30432 Dissimilar Welded Pipe,” Adv. Eng. Softw., 68, 70 (2014); https://doi.org/10.1016/j.advengsoft.2013.12.004.
   Web of Science ®Google Scholar
• K. M. JESPERSEN et al., “Experimental Measurement of Mode-I Fracture Toughness of Dissimilar Material Joints with Thermal Residual Stresses,” Eng. Fract. Mech., 238, 107249 (2020); https://doi.org/10.1016/j.engfracmech.2020.107249.
   Web of Science ®Google Scholar
• J. GUO et al., “Microstructural Characterization and Mechanical Behavior of Cr25Ni35NbM Alloy Dissimilar Weld Joint for Application in a Hydrogen Reformer Furnace,” Metall. Res. Technol., 117, 612 (2020); https://doi.org/10.1051/metal/2020067.
   Web of Science ®Google Scholar
• K. UNE, “Stress Corrosion Cracking of Zircaloy-2 Cladding in Iodine Vapor,” J. Nucl. Sci. Technol., 14, 443 (2008); https://doi.org/10.1080/18811248.1977.9730783.
   Google Scholar
• J. GOLDAK, A. CHAKRAVARTI, and M. BIBBY, “A New Finite Element Model for Welding Heat Sources,” Metall. Trans. B, 15, 299 (1984); https://doi.org/10.1007/BF02667333.
   Web of Science ®Google Scholar
• H. FANG et al., “New General Double Ellipsoid Heat Source Model,” Sci. Technol. Weld. Joining, 10, 361 (2005); https://doi.org/10.1179/174329305X40705.
   Web of Science ®Google Scholar
• B. BRICKSTAD and B. L. JOSEFSON, “A Parametric Study of Residual Stresses in Multi-Pass Butt-Welded Stainless Steel Pipes,” Int. J. Pres. Ves. Pip., 75, 11 (1998); https://doi.org/10.1016/S0308-0161(97)00117-8.
   Web of Science ®Google Scholar
• D. AKBARI and I. SATTARI-FAR, “Effect of the Welding Heat Input on Residual Stresses in Butt-Welds of Dissimilar Pipe Joints,” Int. J. Pres. Ves. Pip., 86, 769 (2009); https://doi.org/10.1016/j.ijpvp.2009.07.005.
   Web of Science ®Google Scholar
• M. C. SMITH et al., “Accurate Prediction of Residual Stress in Stainless Steel Welds,” Comput. Mater. Sci., 54, 312 (2012); https://doi.org/10.1016/j.commatsci.2011.10.024.
   Web of Science ®Google Scholar
• P. DURANTON et al., “3D Modelling of Multipass Welding of a 316L Stainless Steel Pipe,” J. Mater. Process. Technol., 153–154, 457 (2004); https://doi.org/10.1016/j.jmatprotec.2004.04.128.
   Web of Science ®Google Scholar
• L. MUNDAY et al., “Multiscale-Informed Modeling of High Temperature Component Response with Uncertainty Quantification,” Office of Scientific and Technical Information (2020).
   Google Scholar