Developing a Full-Core MCNP6 and RELAP5 Model of the European Pressurized Reactor Using NWURCS

References

• “The EPR Reactor Projects Worldwide,” AREVA; www.areva.com/EN/operations-2542/the-epr-reactor-projects-worldwide.html (current as of June 14, 2017).
   Google Scholar
• S. M. BOWMAN, “KENO-VI Primer: A Primer for Criticality Calculations with SCALE/KENO-VI Using GeeWiz,” ORNL/TM-2008/069, Oak Ridge National Laboratory (2008).
   Google Scholar
• “MCNP6 User’s Manual Version 1.0,” LA-CP-13-00634, D. B. PELOWITZ, Ed., Los Alamos National Laboratory (2013).
   Google Scholar
• J. LEPPANEN, “Serpent—A Continuous-Energy Monte Carlo Reactor Physics Burnup Calculation Code, User’s Manual,” VTT Technical Research Centre of Finland (2015).
   Google Scholar
• “U.S. EPR Final Safety Analysis Report.” Rev. 5, AREVA (2013).
   Google Scholar
• R. D. MOSTELLER, “Validation Suites for MCNP,” LA-UR-02-0878, Los Alamos National Laboratory (2002).
   Google Scholar
• R. F. SARTOR, B. A. GREENFIELD, and F. B. BROWN, “MCNP6 Criticality Calculations Verification and Validation Report,” LA-UR-15-23266, Los Alamos National Laboratory.
   Google Scholar
• R. C. LITTLE, “V&V of MCNP and Data Libraries at Los Alamos,” LA-UR-12-26307, Los Alamos National Laboratory (2012).
   Google Scholar
• A. C. KAHLER et al., “LANL Evaluation and Data Testing Support for ENDF/B-VII.1,” Trans. Am. Nucl. Soc., 107, 683 (2012).
   Google Scholar
• A. BENNETT, “Development and Testing of a Coupled MCNP6/CTF Code,” The Pennsylvania State University (2015).
   Google Scholar
• D. ANDERS et al., “RELAP-7 Level 2 Milestone Report: Demonstration of a Steady State Single Phase PWR Simulation with RELAP-7,” INL/EXT-12-25924, Idaho National Laboratory (2012).
   Google Scholar
• M. AGHAIE, A. ZOLFAGHARI, and A. MINUCHEHR, “Coupled Neutronic Thermal-Hydraulic Transient Analysis of Accidents in PWRs,” Ann. Nucl. Energy, 50, 158 (2012); https://doi.org/10.1016/j.anucene.2012.07.013.
   Web of Science ®Google Scholar
• RELAP, “RELAP5/MOD3.3 Code Manual, Volume II: User’s Guide and Input Requirements,” Idaho National Laboratory (2001).
   Google Scholar
• V. V. NAICKER, M. H. DU TOIT, and G. P. NYALUNGA, “NWURCS User Guide,” North-West University (2015).
   Google Scholar
• D. KOTLYAR et al., “Coupled Neutronic Thermo-Hydraulic Analysis of Full PWR Core with Monte-Carlo Based BGCore System,” Nucl. Eng. Des., 241, 3777 (2011); https://doi.org/10.1016/j.nucengdes.2011.07.028.
   Web of Science ®Google Scholar
• A. AGUNG et al., “Validation of PARCS/RELAP5 Coupled Codes Against a Load Rejection Transient at the Ringhals-3 NPP,” Nucl. Eng. Des., 257, 31 (2013); https://doi.org/10.1016/j.nucengdes.2012.12.023.
   Web of Science ®Google Scholar
• Z. XU, “Design Strategies for Optimizing High Burnup Fuel in Pressurized Water Reactors,” Massachusetts Institute of Technology (2003).
   Google Scholar
• L. G. DELGADO et al., “An Economically Optimum PWR Reload Core for a 36-Month Cycle,” Ann. Nucl. Energy, 26, 659 (1999); https://doi.org/10.1016/S0306-4549(98)00086-3.
   Web of Science ®Google Scholar
• M. TODOSOW and M. KAZIMI, “Optimization for Heterogeneous Utilization of Thorium in PWRs to Enhance Proliferation Resistance and Reduce Waste,” BNL-73152-2004, Brookhaven National Laboratory (2004).
   Google Scholar
• N. SOPPERA, M. BOSSANT, and E. DUPONT, “JANIS 4: An Improved Version of the NEA Java-Based Nuclear Data Information System,” Nucl. Data Sheets, 120, 294 (2014).
   Google Scholar
• M. VAZQUEZ et al., “Coupled Neutronics Thermal-Hydraulics Analysis Using Monte Carlo and Sub-Channel Codes,” Nucl. Eng. Des., 250, 403 (2012); https://doi.org/10.1016/j.nucengdes.2012.06.007.
   Web of Science ®Google Scholar
• “Engineering of Nuclear Systems,” Massachusetts Institute of Technology (2010).
   Google Scholar
• D. OLANDER and A. MOTTA, Light Water Reactor Materials, American Nuclear Society, La Grange Park, Illinois (2017).
   Google Scholar
• “U.S. EPR Final Safety Evaluations,” U.S. Nuclear Regulatory Commission; https://www.nrc.gov/reactors/new-reactors/design-cert/epr/documents/ser-final.html (current as of May 17, 2016).
   Google Scholar
• F. B. BROWN, “On the Use of Shannon Entropy of the Fission Distribution of Assessing Convergence of Monte Carlo Criticality Calculations,” Proc. Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, Canada, September 10–14, 2006, American Nuclear Society (2006).
   Google Scholar
• G. STRYDOM, F. BOSTELMANN, and S. J. YOON, “Results for Phase I of the IAEA Coordinated Research Program on HTGR Uncertainties,” Idaho National Laboratory (2015); https://doi.org/10.13140/2.1.3928.7846.
   Google Scholar
• K. D. WEAVER and S. J. HERRING, “The Effect of the Hydrogen to Heavy Metal Ratio (H/HM) on Reactivity and Discharge Isotopics of Homogeneous Thoria-Urania Fuel,” Proc. 10th Int. Conf. Nuclear Engineering, Arlington, Virginia, April 14–18, 2002, ASME (2002); https://doi.org/10.1115/ICONE10-22070.
   Google Scholar
• B. A. LINDLEY and G. T. PARKS, “Near-Complete Transuranic Waste Incineration in a Thorium Fuelled Pressurised Water Reactor,” Ann. Nucl. Energy, 40, 106 (2012); https://doi.org/10.1016/j.anucene.2011.11.002.
   Web of Science ®Google Scholar
• J. R. LAMARSH and A. J. BARATTA, Introduction to Nuclear Engineering, 3rd ed., Prentice Hall, New Jersey (2001).
   Google Scholar
• “Safety Margins of Operating Reactors,” IAEA-TECDOC-1332, International Atomic Energy Agency (2003).
   Google Scholar
• K. I. BJÖRK, C. W. LAU, and H. NYLÉN, “Study of Thorium-Plutonium Fuel for Possible Operating Cycle Extension in PWRs,” Sci. Technol. Nucl. Install., 2013, 1 (2013); https://doi.org/10.1155/2013/867561.
   Web of Science ®Google Scholar
• T. GREIFENKAMP, K. CLARNO, and J. GEHIN, “Effect of Fuel Temperature Profile on Eigenvalue Calculations,” Proc. American Nuclear Society Student Conf., College Station, Texas, February 28–March, 1, 2008.
   Google Scholar