References
- R. SUGRUE et al., “Assessment of a Simplified Set of Momentum Closure Relations for Low Volume Fraction Regimes in STAR-CCM and OpenFOAM,” Ann. Nucl. Energy, 110, 79 (2017); https://doi.org/10.1016/j.anucene.2017.05.059.
- S. MIMOUNI et al., “Computational Multi-Fluid Dynamics Predictions of Critical Heat Flux in Boiling Flow,” Nucl. Eng. Des., 299, 28 (2016); https://doi.org/10.1016/j.nucengdes.2015.07.017.
- W. D. POINTER and Y. LIU, “Eulerian Two-Fluid RANS-Based CFD Simulations of a Helical Coil Steam Generator Boiling Tube,” Proc. 17th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics, Xi’an, China, 2017.
- E. KREPPER and R. RZEHAK, “CFD for Subcooled Flow Boiling: Simulation of DEBORA Experiments,” Nucl. Eng. Des., 241, 9, 3851 (2011); https://doi.org/10.1016/j.nucengdes.2011.07.003.
- C. J. ROY and W. L. OBERKAMPF, “A Comprehensive Framework for Verification, Validation, and Uncertainty Quantification in Scientific Computing,” Comput. Meth. Appl. Mech. Eng., 200, 25, 2131 (2011); https://doi.org/10.1016/j.cma.2011.03.016.
- S. FERSON, W. L. OBERKAMPF, and L. GINZBURG, “Model Validation and Predictive Capability for the Thermal Challenge Problem,” Comput. Meth. Appl. Mech. Eng., 197, 29, 2408 (2008); https://doi.org/10.1016/j.cma.2007.07.030.
- S. FERSON and W. L. OBERKAMPF, “Validation of Imprecise Probability Models,” Int. J. Reliab. Saf., 3, 1–3, 3 (2009); https://doi.org/10.1504/IJRS.2009.026832.
- N. DINH et al., “Perspectives on Nuclear Reactor Thermal Hydraulics,” Proc. 15th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics, Pisa, Italy, 2013.
- A. BUI et al., “Statistical Modeling Support for Calibration of a Multiphysics Model of Subcooled Boiling Flows,” Proc. Int. Conf. Mathematics and Computational Methods Applied to Nuclear Science and Engineering, Sun Valley, Idaho, May 5–9, 2013, American Nuclear Society (2013).
- N. KURUL and M. Z. PODOWSKI, “Multidimensional Effects in Forced Convection Subcooled Boiling,” Proc. 9th Int. Heat Transfer Conf., Jerusalem, Israel, 1991.
- V. H. DEL VALLE and D. KENNING, “Subcooled Flow Boiling at High Heat Flux,” Int. J. Heat Mass Transfer, 28, 10, 1907 (1985); https://doi.org/10.1016/0017-9310(85)90213-3.
- R. M. PODOWSKI et al., “A Mechanistic Model of the Ebullition Cycle in Forced Convection Subcooled Boiling,” Proc. 8th Int. Topl. Mtg. Nuclear Reactor Thermal-Hydraulics, Kyoto, Japan, 1997.
- C. JAYATILLEKE, “The Influence of Prandtl Number and Surface Roughness on the Resistance of the Laminar Sublayer to Momentum and Heat Transfer,” Prog. Heat Mass Transfer, 1, 193 (1969).
- S. CHEUNG et al., “Modeling Subcooled Flow Boiling in Vertical Channels at Low Pressures—Part 1: Assessment of Empirical Correlations,” Int. J. Heat Mass Transfer, 75, 736 (2014); https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.016.
- M. LEMMERT and J. M. CHAWLA, “Influence of Flow Velocity on Surface Boiling Heat Transfer Coefficient,” Heat Transfer in Boiling, p. 237, Academic Press and Hemisphere (1977).
- C. H. WANG and V. K. DHIR, “Effect of Surface Wettability on Active Nucleation Site Density During Pool Boiling of Water on a Vertical Surface,” J. Heat Transfer, 115, 3, 659 (1993); https://doi.org/10.1115/1.2910737.
- S. R. YANG and R. H. KIM, “A Mathematical Model of the Pool Boiling Nucleation Site Density in Terms of the Surface Characteristics,” Int. J. Heat Mass Transfer, 31, 6, 1127 (1988); https://doi.org/10.1016/0017-9310(88)90055-5.
- T. HIBIKI and M. ISHII, “Active Nucleation Site Density in Boiling Systems,” Int. J. Heat Mass Transfer, 46, 14, 2587 (2003); https://doi.org/10.1016/S0017-9310(03)00031-0.
- R. COLE and W. M. ROHSENOW, “Correlation of Bubble Departure Diameters for Boiling of Saturated Liquids,” Chem. Eng. Prog. Symp. Ser., 65, 92, 211 (1969).
- V. I. TOLUBINSKY and D. M. KONSTANCHUK, “The Rate of Vapour-Bubble Growth in Boiling of Subcooled Water,” Heat Transfer-Soviet Res., 4, 6, 7 (1972).
- G. KOCAMUSTAFAOGULLARI, “Pressure Dependence of Bubble Departure Diameter for Water,” Int. Commun. Heat Mass Transfer, 10, 6, 501 (1983); https://doi.org/10.1016/0735-1933(83)90057-X.
- L. Z. ZENG et al., “A Unified Model for the Prediction of Bubble Detachment Diameters in Boiling Systems—II. Flow Boiling,” Int. J. Heat Mass Transfer, 36, 9, 2271 (1993); https://doi.org/10.1016/S0017-9310(05)80112-7.
- R. COLE, “Bubble Frequencies and Departure Volumes at Subatmospheric Pressures,” AIChE J., 13, 4, 779 (1967); https://doi.org/10.1002/(ISSN)1547-5905.
- G. KOCAMUSTAFAOGULLARI and M. ISHII, “Foundation of the Interfacial Area Transport Equation and Its Closure Relations,” Int. J. Heat Mass Transfer, 38, 3, 481 (1995); https://doi.org/10.1016/0017-9310(94)00183-V.
- H. G. WELLER et al., “A Tensorial Approach to Computational Continuum Mechanics Using Object-Oriented Techniques,” Comput. Phys., 12, 6, 620 (1998); https://doi.org/10.1063/1.168744.
- M. D. MORRIS, “Factorial Sampling Plans for Preliminary Computational Experiments,” Technometrics, 33, 2, 161 (1991); https://doi.org/10.1080/00401706.1991.10484804.
- D. G. CACUCI, M. IONESCU-BUJOR, and I. M. NAVON, Sensitivity and Uncertainty Analysis, Chapman & Hall/CRC Press, Boca Raton, Florida (2003).
- D. G. CACUCI and M. IONESCU-BUJOR, “A Comparative Review of Sensitivity and Uncertainty Analysis of Large-Scale Systems—II: Statistical Methods,” Nucl. Sci. Eng., 147, 3, 204 (2004); https://doi.org/10.13182/04-54CR.
- E. ARSLAN and D. G. CACUCI, “Predictive Modeling of Liquid-Sodium Thermal-Hydraulics Experiments and Computations,” Ann. Nucl. Energy, 63, 355 (2014); https://doi.org/10.1016/j.anucene.2013.07.029.
- M. J. BAYARRI et al., “A Framework for Validation of Computer Models,” Technometrics, 49, 2, 138 (2007); https://doi.org/10.1198/004017007000000092.
- R. C. SMITH, Uncertainty Quantification: Theory, Implementation, and Applications, SIAM, Philadelphia, Pennsylvania (2014).
- Y. LIU et al., “Toward a Better Understanding of Model Validation Metrics,” J. Mech. Des., 133, 7, 071005 (2011); https://doi.org/10.1115/1.4004223.
- A. RICHENDERFER et al., “The Application of Modern Experimental Techniques to the Study of Subcooled Nucleate Flow Boiling Including Critical Heat Flux,” Proc. 17th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics, Xi’an, China, 2017.
- X. WU et al., “Inverse Uncertainty Quantification of TRACE Physical Model Parameters Using Sparse Gird Stochastic Collocation Surrogate Model,” Nucl. Eng. Des., 319, 185 (2017); https://doi.org/10.1016/j.nucengdes.2017.05.011.
- H. HAARIO et al., “DRAM: Efficient Adaptive MCMC,” Stat. Comput., 16, 4, 339 (2006); https://doi.org/10.1007/s11222-006-9438-0.
- N. BASU, G. R. WARRIER, and V. K. DHIR, “Wall Heat Flux Partitioning During Subcooled Flow Boiling: Part 1—Model Development,” J. Heat Transfer, 127, 2, 131 (2005); https://doi.org/10.1115/1.1842784.
- N. H. HOANG et al., “A Bubble Dynamics-Based Model for Wall Heat Flux Partitioning During Nucleate Flow Boiling,” Int. J. Heat Mass Transfer, 112, 454 (2017); https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.128.
- L. GILMAN and E. BAGLIETTO, “A Self-Consistent, Physics-Based Boiling Heat Transfer Modeling Framework for Use in Computational Fluid Dynamics,” Int. J. Multiphase Flow, 95, 35 (2017); https://doi.org/10.1016/j.ijmultiphaseflow.2017.04.018.
- J. YOO, C. E. ESTRADA-PEREZ, and Y. A. HASSAN, “Experimental Study on Bubble Dynamics and Wall Heat Transfer Arising from a Single Nucleation Site at Subcooled Flow Boiling Conditions—Part 1: Experimental Methods and Data Quality Verification,” Int. J. Multiphase Flow, 84, 315 (2016); https://doi.org/10.1016/j.ijmultiphaseflow.2016.04.018.
- M. C. KENNEDY and A. O’HAGAN, “Bayesian Calibration of Computer Models,” J. Royal Stat. Soc. B, 63, 3, 425 (2001); https://doi.org/10.1111/1467-9868.00294.