References
- S. GHOSH, D. MUKHOPADHYAY, and S. K. SAHA, “An Experimental Analysis of Subcooled Leakage Flow Through Slits from High Pressure High Temperature Pipelines,” Int. J. Press. Vessel Pip., 88, 8–9, 281 (2011); https://doi.org/10.1016/j.ijpvp.2011.05.008.
- J. B. LEE and Y. H. CHOI, “Application of LBB to High Energy Pipings of a Pressurized Water Reactor in Korea,” Nucl. Eng. Des., 190, 1, 191 (1999); https://doi.org/10.1016/S0029-5493(98)00310-0.
- B. GHOSH et al., “Leak Rates Through Cracks and Slits in PHT Pipes for LBB,” Nucl. Eng. Des., 212, 1–3, 85 (2002); https://doi.org/10.1016/S0029-5493(01)00486-1.
- J. ZHANG et al., “A Code Development for Leak Before Break (LBB) Leakage from Supercritical to Subcritical Conditions,” Prog. Nucl. Energy, 103, 2017, 217 (Nov. 2018); https://doi.org/10.1016/j.pnucene.2017.11.019.
- J. ZHANG et al., “Prediction of LBB Leakage for Various Conditions by Genetic Neural Network and Genetic Algorithms,” Nucl. Eng. Des., 325, 33 (Apr. 2017); https://doi.org/10.1016/j.nucengdes.2017.09.027.
- R. A. VADLAMANI, S. T. REVANKAR, and J. R. RIZNIC, “Choking Flow of Subcooled Liquid in Steam Generator Tube Wall Cracks,” V02AT09A028 (2014); https://doi.org/10.1115/icone22-30256.
- C. N. AMOS and V. E. SCHROCK, “Two-Phase Critical Flow in Slits,” Trans. Am. Nucl. Soc., 45, 835 (1983).
- E. VALERO and I. E. PARRA, “The Role of Thermal Disequilibrium in Critical Two-Phase Flow,” Int. J. Multiph. Flow, 28, 1, 21 (2002); https://doi.org/10.1016/S0301-9322(01)00064-7.
- N. ABUAF, O. C. JONES, and B. J. C. WU, “Critical Flashing Flows in Nozzles with Suboooled Inlet Conditions,” J. Heat Transfer, 105, 379 (May 1983); https://doi.org/10.1115/1.3245589.
- Y. S. KIM, “Critical Flow Maps Using an Extended Henry-Fauske Model,” Ann. Nucl. Energy, 75, 516 (2015); https://doi.org/10.1016/j.anucene.2014.08.070.
- S. YIN et al., “Mass Transfer Characteristics of Pipeline Leak-Before-Break in a Nuclear Power Station,” Appl. Therm. Eng., 142, 194 (2018); https://doi.org/10.1016/j.applthermaleng.2018.06.077.
- R. E. HENRY, “A Study of One- and Two-Component Two-Phase Critical Flows at Low Qualities,” ANL-7430, Argonne National Laboratory (1968).
- R. E. HENRY, H. K. FAUSKE, and S. T. McCOMAS, “Two-Phase Critical Flow at Low Qualities Part I: Experimental,” Nucl. Sci. Eng., 41, 1, 79 (1970); https://doi.org/10.13182/NSE70-A20366.
- H. J. RICHTER, “Separated Two-Phase Flow Model: Application to Critical Two-Phase Flow,” Int. J. Multiph. Flow, 9, 5, 511 (1983); https://doi.org/10.1016/0301-9322(83)90015-0.
- C. N. AMOS and V. E. SCHROCK, “Two-Phase Critical Flow in Slits,” Nucl. Sci. Eng., 88, 261 (Mar. 1984); https://doi.org/10.13182/NSE84-A18581.
- R. E. HENRY and H. K. FAUSKE, “The Two-Phase Critical Flow of One-Component Mixtures in Nozzles, Orifices, and Short Tubes,” J. Heat Transfer, 93, 2, 179 (1971); https://doi.org/10.1115/1.3449782.
- M. WANG et al., “Research on the Leak-Rate Characteristics of Leak-Before-Break (LBB) in Pressurized Water Reactor (PWR),” Appl. Therm. Eng., 62, 1, 133 (2014); https://doi.org/10.1016/j.applthermaleng.2013.08.046.
- F. J. MOODY, “Maximum Flow Rate of a Single Component, Two-Phase Mixture,” J. Heat Transfer, 87, 1, 134 (1965); https://doi.org/10.1115/1.3689029.
- H. J. YOON, M. ISHII, and S. T. REVANKAR, “Choking Flow Modeling with Mechanical Non-Equilibrium for Two-Phase Two-Component Flow,” Nucl. Eng. Des., 236, 18, 1886 (2006); https://doi.org/10.1016/j.nucengdes.2006.02.007.
- H. J. YOON, M. ISHII, and S. T. REVANKAR, “Choking Flow Modeling with Mechanical and Thermal Non-Equilibrium,” Int. J. Heat Mass Transf., 49, 1–2, 171 (2006); https://doi.org/10.1016/j.ijheatmasstransfer.2005.07.044.
- Y. BARTOSIEWICZ, J. M. SEYNHAEVE, and G. SERRE, “Delayed Equilibrium Model and Validation Experiments for Two-Phase Choked Flows Relevant to LOCA,” Kerntechnik, 77, 2, 108 (2012); https://doi.org/10.3139/124.110239.
- W. WAGNER, “The IAPWS Industrial Formulation Year 1997 for the Thermodynamic Properties of Water and Steam,” ASME J. Eng. Gas Turbines Power, 122, 150 (2000); https://doi.org/10.1115/1.483186.
- C. AMOS and V. SCHROCK, “Critical Discharge of Initially Subcooled Water Through Slits,” NUREG/CR-3476, U.S. Nuclear Regulatory Commission (1983).
- M. DE LORENZO et al., “Benchmark of Delayed Equilibrium Model (DEM) and Classic Two-Phase Critical Flow Models Against Experimental Data,” Int. J. Multiph. Flow, 92, 112 (2017); https://doi.org/10.1016/j.ijmultiphaseflow.2017.03.004.