References
- T. K. KIM et al., “Core Design Studies for a 1000 MWth Advanced Burner Reactor,” Ann. Nucl. Energy, 36, 331 (2009); https://doi.org/10.1016/j.anucene.2008.12.021.
- A. ABOU-JAOUDE et al., “Performance and Safety Evaluation of a Mixed-Spectrum Reactor Design,” Ann. Nucl. Energy, 126, 33 (2019); https://doi.org/10.1016/j.anucene.2018.10.057.
- J. BESS et al., “Comparison of Displacement Damage Calculations Supporting MIMIC Analysis and Design for TREAT,” Proc. Transactions of the American Nuclear Society, Orlando, Florida, November 11–15 (2018).
- E. GREENSPAN, “A Phased Development of Breed-and-Burn Reactors for Enhanced Nuclear Energy Sustainability,” Sustainability, 12, 2745 (2012); https://doi.org/10.3390/su4102745.
- R. PETROSKI, “General Analysis of Breed-and-Burn Reactors and Limited-Separations Fuel Cycles,” PhD Thesis, Massachusetts Institute of Technology (2011).
- M. B. TOLOCZKO, F. A. GARNER, and C. R. EIHOLZER, “Irradiation Creep and Swelling of the US Fusion Heats of HT9 and 9Cr-1Mo to 208 dpa at ~400C,” J. Nucl. Mater., 212–215, 604 (1994); https://doi.org/10.1016/0022-3115(94)90131-7.
- J. HOU et al., “3D In-core Fuel Management Optimization for Breed-and-Burn Reactors,” Prog. Nucl. Energy, 88, 58 (2016); https://doi.org/10.1016/j.pnucene.2015.12.002.
- F. HEIDET, “Maximum Fuel Utilization in Advanced Fast Reactors Without Actinides Separation,” PhD Thesis, University of California, Berkeley (2010).
- S. QVIST, “Safety and Core Design of Large Liquid-Metal Cooled Fast Breeder Reactors,” PhD Thesis, University of California, Berkeley (2013).
- G. ZHANG, “Advanced Burner Reactor with Breed-and-Burn Thorium Blankets for Improved Economics and Resource Utilization,” PhD Thesis, University of California, Berkeley (2015).
- “ASTM E693-17: Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements per Atom (DPA),” American Society for Testing and Materials (2017); https://compass.astm.org/EDIT/html_annot.cgi?E693+17 (current as of Nov. 16, 2019).
- M. J. NORGETT, M. T. ROBINSON, and I. M. TORRENS, “A Proposed Method of Calculating Displacement Dose Rates,” Nucl. Eng. Des., 33, 50 (1975); https://doi.org/10.1016/0029-5493(75)90035-7.
- K. NORDLUND et al., “Improving Atomic Displacement and Replacement Calculations with Physically Realistic Damage Models,” Nat. Commun., 9, 1084 (2018); https://doi.org/10.1038/s41467-018-03415-5.
- A. OSBORNE and M. DEINERT, “Reducing Irradiation Damage in a Long-Life Fast Reactor with Spectral Softening,” Energies, 11, 1507 (2018); https://doi.org/10.3390/en11061507.
- M. AUFIERO et al., “A Collision History-Based Approach to Sensitivity/Perturbation Calculations in the Continuous Energy Monte Carlo Code SERPENT,” Ann. Nucl. Energy, 85, 245 (2015); https://doi.org/10.1016/j.anucene.2015.05.008.
- J. HOU et al., “On Multi-Group Cross Sections for Breed-and-Burn Reactors,” Proc. Transactions of the American Nuclear Society, Anaheim, California, November 9–13 (2014).
- W. J. MARSHALL et al., “Development and Testing of Neutron Cross-Section Covariance Data for Scale 6.2,” Proc. ICNC 2015, Charlotte, North Carolina, September 13–17, 2015 (2015).
- S. QVIST and E. GREENSPAN, “The ADOPT Code for Automated Fast Reactor Core Design,” Ann. Nucl. Energy, 71, 23 (2014); https://doi.org/10.1016/j.anucene.2014.03.013.
- C. KECKLER, M. FRATONI, and E. GREENSPAN, “On the Importance of Control Assembly Layouts in Standing Wave B&B Cores,” Proc. PHYSOR 2018, Cancun, Mexico, April 23–26 (2018).