References
- L. CAILLOT, C. LEMAIGNAN, and B. LINET, “Pellet Clad Interaction in PWR Fuel: Analytical Irradiation Experiment and Finite Element Modelling,” CEA-CONF-11796, CEA Centre d’Etudes de Grenoble (1993).
- A. SOBA and A. DENIS, “Simulation with DIONISIO 1.0 of Thermal and Mechanical Pellet-Cladding Interaction in Nuclear Fuel Rods,” J. Nucl. Mater., 374, 1–2, 32 (2008); https://doi.org/https://doi.org/10.1016/j.jnucmat.2007.06.020.
- M. A. MARTIN-RENGEL et al., “Determination of the Hoop Fracture Properties of Unirradiated Hydrogen-Charged Nuclear Fuel Cladding from Ring Compression Tests,” J. Nucl. Mater., 436, 1–3, 123 (2013); https://doi.org/https://doi.org/10.1016/j.jnucmat.2013.01.311.
- J. S. DUBEY et al., “Assessment of Hydrogen Embrittlement of Zircaloy-2 Pressure Tubes Using Unloading Compliance and Load Normalization Techniques for Determining J–R Curves,” J. Nucl. Mater., 264, 1–2, 20 (1999); https://doi.org/https://doi.org/10.1016/S0022-3115(98)00487-5.
- A. T. MOTTA et al., “Hydrogen in Zirconium Alloys: A Review,” J. Nucl. Mater., 518, 440 (2019); https://doi.org/https://doi.org/10.1016/j.jnucmat.2019.02.042.
- Y. K. BIBILASHVILI et al., “Influence of Irradiation on KISCC of Zr-1%Nb Claddings,” J. Nucl. Mater., 280, 1, 106 (2000); https://doi.org/https://doi.org/10.1016/S0022-3115(00)00012-X.
- T. ALAM et al., “A Review on the Clad Failure Studies,” Nucl. Eng. Des., 241, 9, 3658 (2011); https://doi.org/https://doi.org/10.1016/j.nucengdes.2011.08.009.
- L. O. JERNKVIST, “A Model for Predicting Pellet-Cladding Interaction-Induced Fuel Rod Failure,” Nucl. Eng. Des., 156, 3, 393 (1995); https://doi.org/https://doi.org/10.1016/0029-5493(94)00961-W.
- A. SOBA and A. DENIS, “Model of Fracture for the Zry Cladding of Nuclear Fuel Rods Included in the Code DIONISIO 1.0,” Nucl. Eng. Des., 238, 12, 3292 (2008); https://doi.org/https://doi.org/10.1016/j.nucengdes.2008.06.026.
- I. SCHUSTER and C. LEMAIGNAN, “Influence of Texture on Iodine-Induced Stress Corrosion Cracking of Zircaloy-4 Cladding Tubes,” J. Nucl. Mater., 189, 2, 157 (1992); https://doi.org/https://doi.org/10.1016/0022-3115(92)90528-S.
- J. E. TALIA and F. POVOLO, “Tensile Properties of Zircaloy-4,” J. Nucl. Mater., 67, 1–2, 198 (1977); https://doi.org/https://doi.org/10.1016/0022-3115(77)90174-X.
- W. S. RYU, Y. H. KANG, and L. JAI-YOUNG, “Effects of Iodine Concentration on Iodine-Induced Stress Corrosion Cracking of Zircaloy-4 Tube,” J. Nucl. Mater., 152, 194 (1988); https://doi.org/https://doi.org/10.1016/0022-3115(88)90327-3.
- P. S. SIDKY, “Iodine Stress Corrosion Cracking of Zircaloy Reactor Cladding: Iodine Chemistry (A Review),” J. Nucl. Mater., 256, 1, 1 (1998); https://doi.org/https://doi.org/10.1016/S0022-3115(98)00044-0.
- K. PETTERSSON et al., “Nuclear Fuel Behaviour in Loss-of-Coolant Accident (LOCA) Conditions,” Organisation for Economic Co-operation and Development, Nuclear Energy Agency (2009).
- P. MISHRA et al., “Microstructural Examination of High Temperature Creep Failure of Zircaloy-2 Cladding in Irradiated PHWR Fuel Pins,” J. Nucl. Mater., 429, 1–3, 257 (2012); https://doi.org/https://doi.org/10.1016/j.jnucmat.2012.06.002.
- A. R. MASSIH and L. O. JERNKVIST, “Assessment of Data and Criteria for Cladding Burst in Loss-of-Coolant Accidents,” Quantum Technologies AB (2015).
- J. STUCKERT et al., “QUENCH-LOCA Program at KIT on Secondary Hydriding and Results of the Commissioning Bundle Test QUENCH-L0,” Nucl. Eng. Des., 255, 185 (2013); https://doi.org/https://doi.org/10.1016/j.nucengdes.2012.10.024.
- M. E. MARKIEWICZ and F. J. ERBACHER, “Experiments on Ballooning in Pressurized and Transiently Heated Zircaloy-4 Tubes,” KfK 4343, Kernforschungszentrum Karlsruhe (1988).
- D. ROZZIA et al., “Capabilities of TRANSURANUS Code in Simulating Power Ramp Tests from the IFPE Database,” Nucl. Eng. Des., 241, 4, 1078 (2011); https://doi.org/https://doi.org/10.1016/j.nucengdes.2010.04.027.
- S. DJURLE, “The Studsvik Demo-Ramp II Project,” Studsvik (1982).
- S. DJURLE, “The Studsvik Demo-Ramp I Project,” Studsvik (1983).
- S. DJURLE, “Studsvik Over-Ramp Project,” Electric Power Research Institute (1983).
- S. DJURLE, “The Studsvik Super-Ramp Project,” Studsvik (1984).
- H. MOGARD et al., “International TRANS-RAMP I Fuel Project,” Studsvik (1986).
- G. R. THOMAS, “The Studsvik Inter Ramp Project: An International Power Ramp Experimental Program,” J. Nucl. Mater., 87, 2–3, 215 (1979); https://doi.org/https://doi.org/10.1016/0022-3115(79)90557-9.
- L. A. YEGOROVA et al., “Data Base on the Behavior of High Burnup Fuel Rods with Zr-1%Nb Cladding and UO2 Fuel (VVER Type) Under Reactivity Accident Conditions,” NUREG/IA-0156, U.S. Nuclear Regulatory Commission (1999).
- C. GYÖRI et al., “VVER Ballooning Experiments,”Proc.Enlarged Halden Programme Group Mtg. High Burn-Up Fuel Performance, Safety and Reliability and Degradation of In-Core Materials and Water Chemistry Effects and Man-Machine Systems Research, Lillehammer, Norway, March 15–20, 1998.
- E. GOLDBERG, M. E. LOZA PERALTA, and A. SOBA, “DIONISIO 3.0: Comprehensive 3D Nuclear Fuel Simulation Through PCMI Cohesive and PLENUM Models,” J. Nucl. Mater., 523, 121 (2019); https://doi.org/https://doi.org/10.1016/j.jnucmat.2019.06.005.
- A. SOBA and A. DENIS, “DIONISIO 2.0: New Version of the Code for Simulating a Whole Nuclear Fuel Rod Under Extended Irradiation,” Nucl. Eng. Des., 292, 213 (2015); https://doi.org/https://doi.org/10.1016/j.nucengdes.2015.06.008.
- E. GOLDBERG et al., “New Module for Simulating Experiments Without Irradiation Included in the DIONISIO 3.0 Code,” Nucl. Eng. Des., 374, 111067 (2021); https://doi.org/https://doi.org/10.1016/j.nucengdes.2021.111067.
- G. A. BERNA et al., “FRAPCON-2: A Computer Code for the Calculation of Steady State Thermal-Mechanical Behavior of Oxide Fuel Rods,” Pacific Northwest National Laboratory (1981); https://doi.org/https://doi.org/10.2172/1080054.
- K. J. BATHE, Finite Element Procedures, 2nd ed., Prentice Hall (2005).
- E. W. V. CHAVES, “Mecánica del medio continuo: Conceptos básicos,” Centro Internacional de Métodos Numéricos en Ingeniería (CIMNE) (2012).
- J. R. RICE, “A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks,” J. Appl. Mech., 35, 2, 379 (1968); https://doi.org/https://doi.org/10.1115/1.3601206.
- M. E. LOZA PERALTA, “Modelado del comportamiento termo-mecánico de las vainas de combustibles nucleares bajo irradiación: Evolución de fisuras,” Instituto de Tecnología Sabato (UNSAM) (2016).
- T. L. ANDERSON, Fracture Mechanics: Fundamentals and Applications, 4th ed., CRC Press (2017).
- L. A. DE VEDIA, Mecánica de fractura, CNEA-AC (1986).
- D. R. OLANDER, “Fundamental Aspects of Nuclear Reactor Fuel Elements,” TID-26711-P1, U.S. Department of Commerce (1976); https://doi.org/https://doi.org/10.2172/7343826.
- D. R. J. OWEN and A. J. FAWKES, Engineering Fracture Mechanics: Numerical Methods and Applications, p. 305, Pineridge Press Ltd, Swansea, United Kingdom ( 1983).
- K. M. PRABHAKARAN and V. V. RAJ, “Closed Form Expression for Plastic J-Integral for an Elbow with a Through-Wall Crown Crack Under Opening Bending Moment,” Int. J. Press. Vessels. Pip., 80, 1, 31 (2003); https://doi.org/https://doi.org/10.1016/S0308-0161(02)00137-0.
- R. M. F. LE ROUX, “Estudio de la Propagación de Fisuras en Materiales Dúctiles,” Universidad Politécnica de Madrid (2002).
- B. AOUR, O. RAHMANI, and M. NAIT-ABDELAZIZ, “A Coupled FEM/BEM Approach and Its Accuracy for Solving Crack Problems in Fracture Mechanics,” Int. J. Solids Struct., 44, 7–8, 2523 (2007); https://doi.org/https://doi.org/10.1016/j.ijsolstr.2006.08.001.
- D. KHAN and K. BISWAS, “Path Independent Integral JF* for Circular Arc Crack: FEM-Investigation Under Mechanical and Thermal Loads,” Finite Elem. Anal. Des., 45, 5, 369 (2009); https://doi.org/https://doi.org/10.1016/j.finel.2008.11.005.
- O. HUBER, J. NICKEL, and G. KUHN, “On the Decomposition of the J-Integral for 3D Crack Problems,” Int. J. Fract., 64, 4, 339 (1993); https://doi.org/https://doi.org/10.1007/BF00017849.
- R. H. DODDS, “Finite Element Evaluation of J Parameters in 3D,” Int. J. Fract., 33, 1, R7–R15 (1987); https://doi.org/https://doi.org/10.1007/BF00034901.
- G. P. NIKISHKOV and S. N. ATLURI, “Calculation of Fracture Mechanics Parameters for an Arbitrary Three‐Dimensional Crack, by the ‘Equivalent Domain Integral’ Method,” Int. J. Numer. Meth. Eng., 24, 9, 1801 (1987); https://doi.org/https://doi.org/10.1002/nme.1620240914.
- J. FOXEN and S. RAHMAN, “Elastic-Plastic Analysis of Small Cracks in Tubes Under Internal Pressure and Bending,” Nucl. Eng. Des., 197, 1–2, 75 (2000); https://doi.org/https://doi.org/10.1016/S0029-5493(99)00258-7.
- N. OMER and Z. YOSIBASH, “On the Path Independency of the Point-Wise J Integral in Three-Dimensions,” Int. J. Fract., 136, 1–4, 1 (2005); https://doi.org/https://doi.org/10.1007/s10704-005-3934-7.
- L. CHEN et al., “A Singular Edge-Based Smoothed Finite Element Method (ES-FEM) for Crack Analyses in Anisotropic Media,” Eng. Fract. Mech., 78, 1, 85 (2011); https://doi.org/https://doi.org/10.1016/j.engfracmech.2010.09.018.
- V. TVERGAARD and J. W. HUTCHINSON, “The Relation Between Crack Growth Resistance and Fracture Process Parameters in Elastic-Plastic Solids,” J. Mech. Phys. Solids, 40, 6, 1377 (1992); https://doi.org/https://doi.org/10.1016/0022-5096(92)90020-3.
- L. SIMONI and B. A. SCHREFLER, “Chapter Four - Multi Field Simulation of FractureAdv. Appl. Mech., 47, ,” 367 (2014); https://doi.org/https://doi.org/10.1016/B978-0-12-800130-1.00004-7.
- V. TVERGAARD and A. NEEDLEMAN, “Effects of Nonlocal Damage in Porous Plastic Solids,” Int. J. Solids Struct., 32, 8–9, 1063 (1995); https://doi.org/https://doi.org/10.1016/0020-7683(94)00185-Y.
- L. NOELS and R. RADOVITZKY, “An Explicit Discontinuous Galerkin Method for Non-Linear Solid Dynamics: Formulation, Parallel Implementation and Scalability Properties,” Int. J. Numer. Meth. Eng., 74, 9, 1393 (2008); https://doi.org/https://doi.org/10.1002/nme.2213.
- A. L. GURSON, “Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media,” J. Eng. Mater. Technol., 99, 1, 2 (1977); https://doi.org/https://doi.org/10.1115/1.3443401.
- A. HILLERBORG, M. MODÉER, and P. E. PETERSSON, “Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements,” Cem. Concr. Res., 6, 6, 773 (1976); https://doi.org/https://doi.org/10.1016/0008-8846(76)90007-7.
- A. NEEDLEMAN, “Material Rate Dependence and Mesh Sensitivity in Localization Problems,” Comput. Meth. Appl. Mech. Eng., 67, 1, 69 (1988); https://doi.org/https://doi.org/10.1016/0045-7825(88)90069-2.
- G. I. BARENBLATT, “The Mathematical Theory of Equilibrium Cracks in Brittle Fracture,” Adv. Appl. Mech., 7, 55 (1962); https://doi.org/https://doi.org/10.1016/S0065-2156(08)70121-2.
- J. STUCKERT et al., “Results of the LOCA Reference Bundle Test QUENCH-L0 with Zircaloy-4 Claddings,” Karlsruher Institut für Technologie (2011).
- E. PEREZ-FERÓ et al., “Experimental Database of E110 Claddings Exposed to Accident Conditions,” J. Nucl. Mater., 397, 1–3, 48 (2010); https://doi.org/https://doi.org/10.1016/j.jnucmat.2009.12.005.
- L. NOELS and R. RADOVITZKY, “A General Discontinuous Galerkin Method for Finite Hyperelasticity. Formulation and Numerical Applications,” Int. J. Numer. Meth. Eng., 68, 1, 64 (2006); https://doi.org/https://doi.org/10.1002/nme.1699.
- X. P. XU and A. NEEDLEMAN, “Numerical Simulations of Fast Crack Growth in Brittle Solids,” J. Mech. Phys. Solids, 42, 9, 1397 (1994); https://doi.org/https://doi.org/10.1016/0022-5096(94)90003-5.
- M. KINOSHITA and M. ICHIKAWA, “Fuel Rod Deformation Code FEMAXI-II and Its Application,” Nucl. Eng. Des., 56, 1, 49 (1980); https://doi.org/https://doi.org/10.1016/0029-5493(80)90167-3.
- K. GARIKIPATI et al., “On the Theory and Numerical Simulation of Cohesive Crack Propagation with Application to Fiber-Reinforced Composites,” US National Aeronautics and Space Administration (NASA) (2013); https://doi.org/https://doi.org/10.13140/2.1.4719.4886.
- R. DE BORST, J. J. C. REMMERS, and A. NEEDLEMAN, “Computational Aspects of Cohesive-Zone Models,” Adv. Fract. Mech. Life Saf. Assessments (2004).
- A. A. GRIFFITH and G. I. TAYLOR, “VI. The Phenomena of Rupture and Flow in Solids,” Philos. Trans. R. Soc. London A, 221, 163 and 582–593 (1921); https://doi.org/https://doi.org/10.1098/rsta.1921.0006.
- P.-E. PETERSSON, “Crack Growth and Development of Fracture Zones in Plain Concrete and Similar Materials,” Thesis, Lund Institute of Technology (1981).
- Z. HÓZER et al., “Experiments with VVER Fuels to Confirm Safety Criteria,”Proc. Int. Topl. Mtg. TopFuel, Stockholm, Sweden, May 27–30, 2001.
- L. VASÁROS and L. MATUS, “Steam Oxidation of Zr-Alloys with H Content, Release of Absorbed Hydrogen, ” Proc5th Int. QUENCH Workshop, Karlsruhe, Germany, October 19–21, 1999.
- Á. GRIGER et al., “Ambient and High Temperature Mechanical Properties of ZrNb1 Cladding with Different Oxygen and Hydrogen Content,”Proc.Enlarged Halden Programme Group Meeting, Loen, Norway, May 24–29, 1999.
- F. J. ERBACHER, “REBEKA Test Results,”Proc. 9th Water Reactor Safety Research Information Mtg., Gaithersburg, Maryland, October 26–30, 1981, U.S. Nuclear Regulatory Commission (1981).
- M. E. CAZADO et al., “A New Irradiation Growth Model for Zr-Based Components of Nuclear Reactors for the DIONISIO Code,” Nucl. Eng. Des., 373, 111009 (2021); https://doi.org/https://doi.org/10.1016/j.nucengdes.2020.111009.