References
- S. G. CHO, D. KIM, and S. CHAUDHARY, “A Simplified Model for Nonlinear Seismic Response Analysis of Equipment Cabinets in Nuclear Power Plants,” Nucl. Eng. Des., 241, 8, 2750 (2011); https://doi.org/https://doi.org/10.1016/j.nucengdes.2011.06.026.
- T.-T. TRAN and D. KIM, “Uncertainty Quantification for Nonlinear Seismic Analysis of Cabinet Facility in Nuclear Power Plants,” Nucl. Eng. Des., 355, 110309 (2019); https://doi.org/https://doi.org/10.1016/j.nucengdes.2019.110309.
- M. J. LAROCCO, “Nuclear Power Plant Systems and Equipment,” Nucl. Sci. Eng., 50, 4, 405 (1973); https://doi.org/https://doi.org/10.13182/nse73-a26582.
- J. HUR, “Seismic Performance Evaluation of Switchboard Cabinets Using Nonlinear Numerical Models,” Georgia Institute of Technology (2012).
- K. SALMAN, T.-T. TRAN, and D. KIM, “Grouping Effect on the Seismic Response of Cabinet Facility Considering Primary-Secondary Structure Interaction,” Nucl. Eng. Technol., 52, 6, 1318 (2019); https://doi.org/https://doi.org/10.1016/j.net.2019.11.024.
- K. SALMAN, T.-T. TRAN, and D. KIM, “Seismic Capacity Evaluation of NPP Electrical Cabinet Facility Considering Grouping Effects,” J. Nucl. Sci. Technol., 57, 7, 1 (2020); https://doi.org/https://doi.org/10.1080/00223131.2020.1724206.
- B. J. GOODNO et al., “Effects of the January 2010 Haitian Earthquake on Selected Electrical Equipment,” Earthq. Spectra, 27, Suppl. 1, 251 (2011); https://doi.org/https://doi.org/10.1193/1.3636415.
- S. G. CHO, S. CHANG, and D. SUNG, “Application of Tuned Mass Damper to Mitigation of the Seismic Responses of Electrical Equipment in Nuclear Power Plants,” Energies, 13, 2, 427 (2020); https://doi.org/https://doi.org/10.3390/en13020427.
- A. T. CAO et al., “Simplified Approach for Seismic Risk Assessment of Cabinet Facility in Nuclear Power Plants Based on Cumulative Absolute Velocity,” Nucl. Technol., 206, 5, 743 (2020); https://doi.org/https://doi.org/10.1080/00295450.2019.1696643.
- T.-T. TRAN et al., “Fragility Assessment for Electric Cabinet in Nuclear Power Plant Using Response Surface Methodology,” Nucl. Eng. Technol., 51, 3, 894 (2019); https://doi.org/https://doi.org/10.1016/j.net.2018.12.025.
- “Reducing the Risks of Nonstructural Earthquake Damage—A Practical Guide,” 4th ed., U.S. Department of Homeland Security, Federal Emergency Management Agency (2012).
- D. E. PEPLOW et al., “Calculating Nuclear Power Plant Vulnerability Using Integrated Geometry and Event/Fault-Tree Models,” Nucl. Sci. Eng., 146, 1, 71 (2004); https://doi.org/https://doi.org/10.13182/NSE04-A2394.
- T.-T. TRAN et al., “Seismic Behavior of Steel Cabinets Considering Nonlinear Connections and Site-Response Effects,” Steel Compos. Struct., 36, 1, 17 (2020).
- T.-T. TRAN et al., “Seismic Vulnerability of Cabinet Facility with Tuned Mass Dampers Subjected to High- and Low-Frequency Earthquakes,” Appl. Sci., 10, 14, 4850 (2020); https://doi.org/https://doi.org/10.3390/app10144850.
- J. ZHONG et al., “Optimal Intensity Measures in Probabilistic Seismic Demand Models of Cable-Stayed Bridges Subjected to Pulse-Like Ground Motions,” J. Bridge Eng., 24, 2 (2019); https://doi.org/https://doi.org/10.1061/(ASCE)BE.1943-5592.0001329.
- P. TOTHONG and N. LUCO, “Probabilistic Seismic Demand Analysis Using Advanced Ground Motion Intensity Measures,” Earthq. Eng. Struct. Dyn., 36, 13, 1837 (2007); https://doi.org/https://doi.org/10.1002/eqe.696.
- J. E. PADGETT, B. G. NIELSON, and R. DESROCHES, “Selection of Optimal Intensity Measures in Probabilistic Seismic Demand Models of Highway Bridge Portfolios,” Earthq. Eng. Struct. Dyn., 37, 5, 711 (2008); https://doi.org/https://doi.org/10.1002/eqe.782.
- N. SHOME et al., “Earthquakes, Records, and Nonlinear Responses,” Earthq. Spectra, 14, 3, 469 (1998); https://doi.org/https://doi.org/10.1193/1.1586011.
- A. CORNELL et al., “Probabilistic Basis for 2000 SAC Federal Emergency Management Agency Steel Moment Frame Guidelines,” J. Struct. Eng., 128, 4 (2002).
- J. ZHONG et al., “Probabilistic Seismic Demand and Capacity Models and Fragility Curves for Reticulated Structures Under Far-Field Ground Motions,” Thin-Walled Struct., 137, 436 (2019); https://doi.org/https://doi.org/10.1016/j.tws.2019.01.032.
- M. AMIRI and M. YAKHCHALIAN, “Performance of Intensity Measures for Seismic Collapse Assessment of Structures with Vertical Mass Irregularity,” Structures, 24, 728 (2020); https://doi.org/https://doi.org/10.1016/j.istruc.2020.01.038.
- L. JIANG et al., “Optimal Seismic Intensity Measure Selection for Isolated Bridges Under Pulse-Like Ground Motions,” Adv. Civ. Eng., 2019 (2019); https://doi.org/https://doi.org/10.1155/2019/3858457.
- M. A. HARIRI-ARDEBILI and V. E. SAOUMA, “Probabilistic Seismic Demand Model and Optimal Intensity Measure for Concrete Dams,” Struct. Saf., 59, 67 (2016); https://doi.org/https://doi.org/10.1016/j.strusafe.2015.12.001.
- A. GUPTA et al., “Current State of In-Cabinet Response Spectra for Seismic Qualification of Equipment in Nuclear Power Plants,” Nucl. Eng. Des., 343, 269 (2019); https://doi.org/https://doi.org/10.1016/j.nucengdes.2018.12.017.
- P. C. NGUYEN and S. E. KIM, “A New Improved Fiber Plastic Hinge Method Accounting for Lateral-Torsional Buckling of 3D Steel Frames,” Thin-Walled Struct., 127, 666 (2018); https://doi.org/https://doi.org/10.1016/j.tws.2017.12.031.
- J. HENRIQUES et al., “Structural Performance of Light Steel Framing Panels Using Screw Connections Subjected to Lateral Loading,” Thin-Walled Struct., 121, 67 (2017); https://doi.org/https://doi.org/10.1016/j.tws.2017.09.024.
- AISI S200-12, “North American Standard for Cold-Formed Steel Framing – General Provisions, 2012 Edition,” American Iron and Steel Institute, Washington, D.C. (2012).
- R. M. FRANCKA, “Screw Connections Subject to Tension Pull-Out and Shear Forces,” Masters Thesis, Missouri University of Science and Technology (2009).
- T. PEKOZ, “Design of Cold-Formed Steel Screw Connections,” Proc.10th Int. Specialty Conf. Cold-Formed Steel Structures, St. Louis, Missouri, October 23–24, 1990, p. 575 (1990).
- S. Y. KHOO et al., “Feasibility Study of Performing Experimental Modal Analysis with Oblique Impact Testing Using Various Oblique Impact Directions,” Alexandria Eng. J., 59, 1, 457 (2020); https://doi.org/https://doi.org/10.1016/j.aej.2020.01.014.
- Y. WENG et al., “Experimental and Numerical Investigations on Heat Transfer of Reactor Internals Under Direct Injection,” Nucl. Sci. Eng., 190, 1, 93 (2018); https://doi.org/https://doi.org/10.1080/00295639.2017.1417345.
- R. BRINCKER, L. ZHANG, and P. ANDERSEN, “Modal Identification of Output-Only Systems Using Frequency Domain Decomposition,” Smart Mater. Struct., 10, 3, 441 (2001); https://doi.org/https://doi.org/10.1088/0964-1726/10/3/303.
- D. D. NGUYEN et al., “Identifying Significant Earthquake Intensity Measures for Evaluating Seismic Damage and Fragility of Nuclear Power Plant Structures,” Nucl. Eng. Technol., 52, 1, 192 (2019); https://doi.org/https://doi.org/10.1016/j.net.2019.06.013.
- T. D. ANCHETA et al., “PEER NGA-West2 Database : A Database of Ground Motions Recorded in Shallow Crustal Earthquakes in Active Tectonic Regions,”Proc. 15th World Conf. Earthquake Engineering, Lisbon, Portugal, September 24–28, 2012, p. 30013 (2012).
- Korea Meteorological Administration database; https://web.kma.go.kr/eng/index.jsp ( current as of Mar. 8, 2020).
- K. K. BANDYOPADHYAY et al., “Seismic Fragility of Nuclear Power Plant Components (PHASE II),” NUREG/CR-4659, BNL-NUREG-52007, Brookhaven National Laboratory/U.S. Nuclear Regulatory Commission (1991).
- T.-T. TRAN, T.-H. NGUYEN, and D. KIM, “Seismic Incidence on Base-Isolated Nuclear Power Plants Considering Uni- and Bi-Directional Ground Motions,” J. Struct. Integr. Maint., 3, 2, 86 (2018); https://doi.org/https://doi.org/10.1080/24705314.2018.1461547.
- “High Frequency Program: Application Guidance for Functional Confirmation and Fragility Evaluation,” Electric Power Research Institute (2015).
- F. JALAYER et al., “Bayesian Cloud Analysis: Efficient Structural Fragility Assessment Using Linear Regression,” Bull. Earthq. Eng., 13, 4, 1183 (2015); https://doi.org/https://doi.org/10.1007/s10518-014-9692-z.
- A. ALI et al., “Seismic Vulnerability of Offshore Wind Turbines to Pulse and Non-Pulse Records,” Earthq. Eng. Struct. Dyn., 49, 1, 24 (2020); https://doi.org/https://doi.org/10.1002/eqe.3222.
- Y. M. MAHMOUD et al., “Assessment of Progressive Collapse of Steel Structures Under Seismic Loads,” Alexandria Eng. J., 57, 4, 3825 (2018); https://doi.org/https://doi.org/10.1016/j.aej.2018.02.004.
- B. A. BRADLEY, “Empirical Equations for the Prediction of Displacement Spectrum Intensity and Its Correlation with Other Intensity Measures,” Soil Dyn. Earthq. Eng., 31, 8, 1182 (2011); https://doi.org/https://doi.org/10.1016/j.soildyn.2011.04.007.