References
- M. OGUMA, “Cracking and Relocation Behavior of Nuclear Fuel Pellets During Rise to Power,” Nucl. Eng. Des., 76, 1, 35 (1983); https://doi.org/https://doi.org/10.1016/0029-5493(83)90045-6.
- B. BRZOSKA et al., “Influence of Pellet-Clad-Gap-Size on LWR Fuel Rod Performance,” Transactions 5th SMiRT Conf., Berlin, Germany, 1979, p. D2/1, International Association for Structural Mechanics in Reactor Technology (1979).
- D. D. LANNING, “The Possible Impact of Fuel Pellet Cracking on Inferred Gap Conductance and Fuel Stored Energy,” Nucl. Technol., 56, 3, 565 (1982); https://doi.org/https://doi.org/10.13182/NT82-A32915.
- M. P. BOHN, “FRACAS—A Subcode for the Analysis of Fuel Pellet-Cladding Mechanical Interaction,” TREE-NUREG-1028, Idaho National Engineering Laboratory (1977).
- ENTROPY LIMITED, “SPEAR-BETA Fuel Performance Code System Volume 1. General Description,” EPRI NP-2291, Vol. 1, Final Report, Electric Power Research Institute (1982).
- K. ITO et al., “A Comparison of FEMAXI-III Code Calculations with Irradiation Experiments,” Res. Mech., 2, 109 (1981).
- B. W. SPENCER et al., “Separate-Effects Validation Experiments for Models of Fracture in Ceramic Nuclear Fuel,” Proc. Top Fuel 2019, Seattle, Washington, September 22–27, 2019.
- R. L. WILLIAMSON et al., “BISON: A Flexible Code for Advanced Simulation of the Performance of Multiple Nuclear Fuel Forms,” Nucl. Technol., 207, 7, 954 (2021) https://doi.org/https://doi.org/10.1080/00295450.2020.1836940.
- J. Y. YEH et al., “Coupled Physics Simulation of Fracture in Nuclear Fuel Pellets Induced by Resistive Heating,” J. Nucl. Mater., 553, 153004 (2021); https://doi.org/https://doi.org/10.1016/j.jnucmat.2021.153004.
- C. R. KENNEDY et al., “Cracking and Healing Behavior of UO2 as Related to Pellet-Cladding Mechanical Interaction,” Interim Report, Electric Power Research Institute (July 1976); ANL-76-110, Argonne National Laboratory Materials Science Division (Oct. 1976).
- S. PATNAIK et al., “Experimental System for Studying Temperature Gradient Driven Fracture of Oxide Nuclear Fuel Out of Reactor,” Rev. Sci. Instrum., 91, 3, 035101 (Mar. 2020); https://doi.org/https://doi.org/10.1063/1.5119361.
- S. PATNAIK et al., “Evaluation of Ceria as a Surrogate Material for UO2 in Experiments on Fuel Cracking Driven by Resistive Heating,” Nucl. Eng. Des., 384, 111482 (2021); https://doi.org/https://doi.org/10.1016/j.nucengdes.2021.111482.
- T. M. BESMANN, J. W. McMURRAY, and S. SIMUNOVIC, “Application of Thermochemical Modeling to Assessment/Evaluation of Nuclear Fuel Behavior,” CALPHAD, 55, 47 (2016); https://doi.org/https://doi.org/10.1016/j.calphad.2016.04.004.
- “Combat Boron Nitride Solids,” |Saint-Gobain Boron Nitride; https://www.bn.saint-gobain.com/sites/imdf.bn.com/files/combat-bn-solids-ds.pdf ( current as of Feb. 17, 2021).
- J. L. BATES, C. A. HINMAN, and T. KAWADA, “Electrical Conductivity of Uranium Dioxide,” J. Am. Ceram. Soc., 50, 12, 652 (Dec. 1967); https://doi.org/https://doi.org/10.1111/j.1151-2916.1967.tb15021.x.
- S. PATNAIK, “Separate Effects Tests for Studying Thermal Gradient Driven Cracking in UO2 Pellets Undergoing Resistive Heating,” PhD Dissertation, University of South Carolina (Apr. 2021).
- S. GIORDANO, “Electrical Behaviour of a Single Crack in a Conductor and Exponential Laws for Conductivity in Micro Cracked Solids,” Int. J. Appl. Electromagnet. Mech., 26, 1–2, 1 (2007); https://doi.org/https://doi.org/10.3233/JAE-2007-815.
- R. K. WILLARDSON, J. W. MOODY, and H. L. GOERING, “The Electrical Properties of Uranium Oxides,” NSA-11-001710, Battelle Memorial Institute (1956).
- L. VAN BRUTZEL, R. DINGREVILLE, and T. J. BARTEL, “Nuclear Fuel Deformation Phenomena, Chapter 2,” NEA/NSC/R(2015)5, Organisation for Economic Co-operation and Development, Nuclear Energy Agency, Nuclear Science Committee.
- D. R. OLANDER, “Fundamental Aspects of Nuclear Reactor Fuel Elements,” TID-26711-P1, Energy Research and Development Administration (1976).
- S. C. S. FAYA, “A Survey on Fuel Pellet Cracking and Healing Phenomena in Reactor Operation,” Instituto de Pesquisas Energéticas e Nucleares Sao Paulo – Brasil (Oct. 1981).
- Z. HIEZL, “Processing and Microstructural Characterization of UO2-Based Simulated Spent Nuclear Fuel Ceramics for the UK`s Advanced Gas-Cooled Reactors,” PhD Thesis, Imperial College of London (2015).
- J. SPINO, K. VENNIX, and M. COQUERELLE, “Detailed Characterization of the Rim Microstructure in PWR Fuels in the Burn-Up Range 40-67 GWd/tM,” J. Nucl. Mater., 231, 3, 179 (1996); https://doi.org/https://doi.org/10.1016/0022-3115(96)00374-1.
- K. J. BOWLES and R. E. GHYAS, “Evaluation of Refractory-Metal-Clad Uranium Nitride and Uranium Dioxide Fuel Pins After Irradiation for Times up to 10450 Hours at 990°C,” NASA TN 0-7891, Lewis Research Center, National Aeronautics and Space Administration (June 1975).
- Thermal Etching Process of a Ceramic Under Oxidizing Conditions, U.S. Patent 6,171,511 B1 (Jan. 9, 2001).
- K. E. METZGER, “Analysis of Pellet Cladding Interaction and Creep of U3Si2 Fuel for Use in Light Water Reactors,” Doctoral Dissertation (2016); https://scholarcommons.sc.edu/etd/3811 ( current as of Feb. 17, 2021).
- T. ISHII, K. NAITO, and K. OSHIMA, “Electrical Conductivity and Defect Structures in Non-Stoichiometric UO2+x,” J. Nucl. Mater., 36, 3, 288 (1970); https://doi.org/https://doi.org/10.1016/0022-3115(70)90044-9.