References
- A. L. WRIGHT, “Primary System Fission Product Release and Transport: A State-of-the-Art Report to the Committee on the Safety of Nuclear Installations,” NUREG/CR-6193; NEA/CSNI/R (94)2; ORNL/TM-1281, Nuclear Regulatory Commission (1994).
- R. A. LORENZ and J. L. COLLINS, “The Release and Transport of Fission Product Cesium in the TMI-2 (Three Mile Island-Unit 2) Accident,” presented at the Symp. on Chemical Phenomena Associated with Radioactivity Releases During Severe Nuclear Plant Accidents, National Meeting of the American Chemical Society, Division of Nuclear Chemistry and Technology, Anaheim, California, September 8–12, 1986.
- I. JOHNSON et al., “Downstream Behavior of Fission Products,” CONF-860911-27, American Chemical Society (1986).
- S. J. CHANG et al., “Corrosion of Austenitic Stainless Steel in Steam Containing Cesium Hydroxide,” J. Nucl. Sci. Technol., 29, 8, 753 (1992); https://doi.org/https://doi.org/10.1080/18811248.1992.9731591.
- M. KOBATA et al., “Chemical Form Analysis of Reaction Products in Cs-Adsorption on Stainless Steel by Means of HAXPES and SEM/EDX,” J. Nucl. Mat., 498, 387 (2018); https://doi.org/https://doi.org/10.1016/j.jnucmat.2017.10.035.
- S. IMOTO, “Chemical State of Fission Products in Irradiated UO2,” J. Nucl. Mat., 140, 1, 19 (1986); https://doi.org/https://doi.org/10.1016/0022-3115(86)90192-3.
- L. DEVELL and K. JOHANSSON, “Specific Features of Cesium Chemistry and Physics Affecting Reactor Accident Source Term Predictions,” NEA/CSNI/R(94)28, Nuclear Energy Agency of the Organisation for Economic Co-operation and Development (1994).
- K. MINATO, “Thermodynamic Analysis of Cesium and Iodine Behavior in Severe Light Water Reactor Accidents,” J. Nucl. Mat., 85, 2, 154 (1991); https://doi.org/https://doi.org/10.1016/0022-3115(91)90330-A.
- S. MIWA, S. YAMASHITA, and M. OSAKA, “Prediction of the Effects of Boron Release Kinetics on the Vapor Species of Cesium and Iodine Fission Products,” Prog. Nucl. Energy., 92, 254 (2016); https://doi.org/https://doi.org/10.1016/j.pnucene.2016.02.023.
- R. DUBOURG, H. FAURE-GEORS, and M. BARRACHIN, “Fission Product Release in the First Two PHEBUS Tests FPT0 and FPT1,” Nucl. Eng. Des., 235, 20, 2183 (2005); https://doi.org/https://doi.org/10.1016/j.nucengdes.2005.03.007.
- A. V. JONES, R. ZEYEN, and M. SANGIORGI, “Circuit and Containment Aspects of Phebus Experiments FPT0 and FPT1,” JRC Science and Policy Report, European Commission (2015).
- T. M. D. DO, S. SUPAMARD, and T. OGAWA, “Behavior of Cesium Molybdate, Cs2MoO4, in Severe Accident Conditions. (1) Partitioning of Cs and Mo Among Gaseous Species,” J. Nucl. Sci. Technol., 55, 3, 348 (2018); https://doi.org/https://doi.org/10.1080/00223131.2017.1397560.
- H. R. HOEKSTRA, “The Cs2MoO4-MoO3 System,” Inorg. Nucl. Chem. Lett., 9, 1291 (1973); https://doi.org/https://doi.org/10.1016/0020-1650(73)80013-3.
- M. YAMAWAKI et al., “Thermodynamics of Vaporization of Cesium Molybdate by Means of Mass Spectrometry,” J. Nucl. Mat., 201, 257 (1993); https://doi.org/https://doi.org/10.1016/0022-3115(93)90181-W.
- D. RENUSCH et al., “Transient Oxidation in Fe-Cr-Ni Alloys: A Raman-Scattering Study,” Oxid. Met., 46, 5–6, 365 (1996); https://doi.org/https://doi.org/10.1007/BF01048636.
- G. ERIKSSON and K. HACK, “ChemSage-a Computer Program for the Calculation of Complex Chemical Equilibria,” Mater. Trans., 21, 1013 (1990); https://doi.org/https://doi.org/10.1007/BF02670272.
- J. R. TAYLOR and A. T. DINSDALE, “A Thermodynamic Assessment of the Cr-Fe-O System,” Z. Metallkd., 84, 5, 335 (1993).
- J. T. BITTEL, L. H. SJODAHL, and J. F. WHITE, “Oxidation of 304L Stainless Steel by Steam and by Air,” Corosion, 25, 1, 7 (1969); https://doi.org/https://doi.org/10.5006/0010-9312-25.1.7.
- B. SUNDMAN, “An Assessment of the Fe-O System,” J. Phase Equilibria., 12, 2, 127 (1991); https://doi.org/https://doi.org/10.1007/BF02645709.
- K. KOYAMA et al., “Determination of Standard Gibbs Energies of Formation of Fe2Mo3O12, Fe2Mo3O8, Fe2MoO4, and FeMoO4 of the Fe-Mo-O Ternary System and µ Phase of the Fe-Mo Binary System by Electromotive Force Measurement Using an Y2O3-Stabilized ZrO2 Solid Electrolyte,” Metal. Mater. Trans. B., 34, 653 (2003); https://doi.org/https://doi.org/10.1007/s11663-003-0036-7.
- T. B. LINDEMER, T. M. BESMANN, and C. E. JOHNSON, “Thermodynamic Review and Calculations Alkali Metal Oxide Systems with Nuclear Fuels, Fission Products and Structural Materials,” J. Nucl. Mater., 100, 178 (1981); https://doi.org/https://doi.org/10.1016/0022-3115(81)90533-X.
- K. KOYAMA and T. HARADA, “Phase Diagram of Fe-Mo-O System at 1173~1473 K,” J. Japan Inst. Metals., 58, 1401 (1994); https://doi.org/https://doi.org/10.2320/jinstmet1952.58.12_1401.
- H. KLEYKAMP and V. SCHAUER, “Phase Equilibria and Thermodynamics in the Fe-Mo and Fe-Mo-O Systems,” J. Less-Common Met., 81, 2, 229 (1981); https://doi.org/https://doi.org/10.1016/0022-5088(81)90029-1.
- T. KATSURA et al., “Some Thermodynamic Properties in Spinel Solid Solutions with the Fe3O4 component,” J. Solid. State. Chem., 13, 107 (1975); https://doi.org/https://doi.org/10.1016/0022-4596(75)90087-0.