A Critical Review of Heat Pipe Experiments in Nuclear Energy Applications

References

• D. A. REAY, “The Perkins Tube—A Noteworthy Contribution to Heat Exchanger Technology,” J. Heat Recovery Syst., 2, 2, 173 (1982); https://doi.org/10.1016/0198-7593(82)90045-5.
   Google Scholar
• R. S. GAUGLER, “ Heat Transfer Device,” US 2350348 A, United States Patent Office (1944); https://lens.org/039-405-146-456-723 (current as of Feb. 13, 2022).
   Google Scholar
• L. M. TREFETHEN, “On the Surface Tension Pumping of Liquids, or, A Possible Role of the Candle Wick in Space Exploration,” Technical Information Services No. 61SD114, General Electric Company (1962).
   Google Scholar
• T. WYATT, “Satellite Temperature Stabilization System,” US 3152774 A, United States Patent Office (1964); https://patents.google.com/patent/US3152774A/en (current as of Feb. 13, 2022).
   Google Scholar
• G. M. GROVER, T. P. COTTER, and G. F. ERICKSON, “Structures of Very High Thermal Conductance,” J. Appl. Phys., 35, 6 (1964); https://doi.org/10.1063/1.1713792.
   Google Scholar
• G. M. GROVER, “ Evaporation-Condensation Heat Transfer Device,” US 3229759 A, United States Patent Office (1966); https://www.lens.org/lens/patent/137-356-119-991-880 (current as of Feb. 13, 2022).
   Google Scholar
• G. M. GROVER, C. A. BUSSE, and J. BOHDANKSY, “ Nuclear Reactor with Thermionic Converter,” US 3302042 A, United States Patent Office (1967); https://lens.org/070-424-404-776-402 (current as of Feb. 13, 2022).
   Google Scholar
• J. E. DEVERALL, E. W. SALMI, and R. J. KNAPP, “Orbital Heat Pipe Experiment,” Los Alamos National Laboratory (1967); https://doi.org/10.2172/4349401.
   Google Scholar
• P. FIEBELMANN and V. BESOZZO, “ Nuclear Reactor,” US 3403075 A, United States Patent Office (1968); https://lens.org/114-677-671-705-043 (current as of Feb. 13, 2022).
   Google Scholar
• C. A. HEATH and E. LANTZ, “Nuclear Thermionic Space Power System Concept Employing Heat Pipes,” National Aeronautics and Space Administration (1968); https://www.osti.gov/biblio/4505844 (current as of Feb. 13, 2022).
   Google Scholar
• V. E. HAMPEL and R. P. KOOPMAN, “Reactivity Self-Control on Power and Temperature in Reactors Cooled by Heatpipes,” Trans. Am. Nucl. Soc., 11, 433 (1968); https://www.osti.gov/biblio/4813461 (current as of Feb. 13, 2022).
   Google Scholar
• G. NEIDERAUER and E. LANTZ, “Split-Core Heat Pipe Reactor Concept for an Out-of-Core Thermionic Power System,” Proc. IEEE Thermionic Conversion Specialist Conf., New York, 1970, p. 257, Institute of Electrical and Electronics Engineers (1970); https://www.osti.gov/biblio/4717845 (current as of Feb. 13, 2022).
   Google Scholar
• G. NIEDERAUER, E. LANTZ, and R. BREITWEISER, “Split-Core Heat-Pipe Reactors for Out-of-Pile Thermionic Power Systems,” Trans. Am. Nucl. Soc. (1971); https://ntrs.nasa.gov/citations/19720030759 (current as of Feb. 13, 2022).
   Google Scholar
• D. R. KOENIG, W. A. RANKEN, and E. W. SALMI, “Heat Pipe Reactors for Space Power Applications,” J. Energy, 1, 4, 237 (1977); https://doi.org/10.2514/3.62334.
   Google Scholar
• V. C. TRUSCELLO, “SP-100, The U.S. Space Nuclear Reactor Power Program,” National Aeronautics and Space Administration Jet Propulsion Laboratory (1983); https://doi.org/10.2172/10184691.
   Google Scholar
• V. F. DEAN et al., “Heat Pipe Space Nuclear Reactor Design Assessment. Volume 1. Design Status of the SP-100 Heat-Pipe Space Nuclear Reactor System, Final Report, 5 May 1982–27 March 1985,” Air Force Weapons Laboratory (1985); https://www.osti.gov/biblio/5995869 (current as of Feb. 13, 2022).
   Google Scholar
• M. P. MORIARTY and W. R. DETERMAN, “SP-100 Advanced Radiator Designs for Thermoelectric and Stirling Applications,” Rockwell International/Rocketdyne Division (1989); https://doi.org/10.1063/1.40128.
   Google Scholar
• R. D. ROVANG et al., “SP-100 High-Temperature Advanced Radiator Development,” AIP Conf. Proc., 217, 702 (1991); https://doi.org/10.1063/1.40128.
   Google Scholar
• A. J. JUHASZ and R. D. ROVANG, “Development of Lightweight Prototype Carbon-Carbon Heat Pipe with Integral Fins and Metal Foil Liner,” AIP Conf. Proc., 324, 135 (1995); https://doi.org/10.1063/1.47214.
   Google Scholar
• R. B. HARTY and L. S. MASON, “100-kWe Lunar/Mars Surface Power Utilizing the SP-100 Reactor with Dynamic Conversion,” AIP Conf. Proc., 271, 1065 (1993); https://doi.org/10.1063/1.43087.
   Google Scholar
• A. T. MARRIOTT and T. FUJITA, “Evolution of SP-100 System Designs,” AIP Conf. Proc., 301, 157 (1994); https://doi.org/10.1063/1.2950180.
   Google Scholar
• A. T. JOSLOFF et al., “SP-100 Generic Flight System Design and Early Flight Options,” AIP Conf. Proc., 301, 533 (1994); https://doi.org/10.1063/1.2950231.
   Google Scholar
• G. E. POWELL and F. J. REDD, “Thermion: Verification of a Thermionic Heat Pipe in Microgravity,” Utah State University (1991); https://www.osti.gov/biblio/7239615 (current as of Feb. 13, 2022).
   Google Scholar
• W. A. RANKEN and J. A. TURNER, “Design Studies of the Moderated Heat Pipe Thermionic Reactor (MOHTR) Concept,” Proc. 26th Intersociety Energy Conversion Engineering Conf., Boston, Massachusetts, August 4–9, 1991, American Nuclear Society (1991); https://digital.library.unt.edu/ark:/67531/metadc1092499/ (current as of Feb. 13, 2022).
   Google Scholar
• M. A. MERRIGAN and V. L. TRUJILLO, “Moderated Heat Pipe Thermionic Reactor (MOHTR) Module Development and Test,” AIP Conf. Proc., 246, 1038 (1992); https://doi.org/10.1063/1.41781.
   Google Scholar
• L. L. BEGG, T. J. WUCHTE, and W. D. OTTING, “Star-C Thermionic Space Nuclear Power System,” AIP Conf. Proc., 246, 114 (1992); https://doi.org/10.1063/1.41774.
   Google Scholar
• W. R. DETERMAN and G. HAGELSTON, “Thermionic In-Core Heat Pipe Design and Performance,” AIP Conf. Proc., 246, 1046 (1992); https://doi.org/10.1063/1.41913.
   Google Scholar
• W. A. RANKEN and M. G. HOUTS, “Heat Pipe Cooled Reactors for Multi-Kilowatt Space Power Supplies,” Los Alamos National Laboratory (1995); https://www.osti.gov/biblio/10115990 (current as of Feb. 13, 2022).
   Google Scholar
• M. G. HOUTS, D. I. POSTON, and W. A. RANKEN, “HPS: A Space Fission Power System Suitable for Near-Term, Low-Cost Lunar and Planetary Bases,” Proc. 5th Int. Conf. Engineering, Construction, and Operations in Space, Albuquerque, New Mexico, June 1–6, 1996.
   Google Scholar
• D. I. POSTON and M. G. HOUTS, “Nuclear and Thermal Analysis of the Heatpipe Power and Bimodal Systems,” AIP Conf. Proc., 361, 1129 (1996); https://doi.org/10.1063/1.50052.
   Google Scholar
• D. I. POSTON, “The Heatpipe-Operated Mars Exploration Reactor (HOMER),” Los Alamos National Laboratory (2000); https://www.osti.gov/servlets/purl/766062 (current as of Feb. 13, 2022).
   Google Scholar
• R. S. REID, J. T. SENA, and A. L. MARTINEZ, “Sodium Heat Pipe Module Test for the SAFE-30 Reactor Prototype,” AIP Conf. Proc., 552, 869 (2001); https://doi.org/10.1063/1.1358021.
   Google Scholar
• D. I. POSTON, R. J. KAPERNICK, and R. M. GUFFEE, “Design and Analysis of the SAFE-400 Space Fission Reactor,” AIP Conf. Proc., 608, 578 (2002); https://doi.org/10.1063/1.1449775.
   Google Scholar
• P. J. RING, E. D. SAYRE, and J. T. SENA, “SAFE-100 Module Fabrication and Test,” AIP Conf. Proc., 654, 96 (2003); https://doi.org/10.1063/1.1541282.
   Google Scholar
• B. E. STEEVE, “Safe Affordable Fission Engine- (SAFE-) 100a Heat Exchanger Thermal and Structural Analysis,” National Aeronautics and Space Administration (2005); https://ntrs.nasa.gov/citations/20050166900 (current as of Feb. 13, 2022).
   Google Scholar
• M. S. EL-GENK and J.-M. TOURNIER, “SAIRS—Scalable Amtec Integrated Reactor Space Power System,” Prog. Nucl. Energy, 45, 1, 25 (2004); https://doi.org/10.1016/j.pnucene.2004.08.002.
   Web of Science ®Google Scholar
• P. C. SCHMITZ, J. G. SCHREIBER, and L. B. PENSWICK, “Feasibility Study of a Nuclear-Stirling Power Plant for the Jupiter Icy Moons Orbiter,” AIP Conf. Proc., 746, 738 (2005); https://doi.org/10.1063/1.1867193.
   Google Scholar
• J.-M. TOURNIER and M. S. EL-GENK, “Liquid Metal Heat Pipes Radiator for Space Nuclear Reactor Power Systems,” Proc. 3rd Int. Energy Conversion Engineering Conf., San Francisco, California, August 15–18, 2005, American Institute of Aeronautics and Astronautics (2005); https://doi.org/10.2514/6.2005-5701.
   Google Scholar
• M. S. EL-GENK and J.-M. TOURNIER, “High Temperature Water Heat Pipes Radiator for a Brayton Space Reactor Power System,” AIP Conf. Proc., 813, 716 (2006); https://doi.org/10.1063/1.2169253.
   Google Scholar
• J. C. KING and M. S. EL-GENK, “Submersion-Subcritical Safe Space (S4) Reactor,” Nucl. Eng. Des., 236, 17, 1759 (2006); https://doi.org/10.1016/j.nucengdes.2005.12.010.
   Google Scholar
• B. M. GALLO and M. S. EL-GENK, “Brayton Rotating Units for Space Reactor Power Systems,” Energy Convers. Manage., 50, 9, 2210 (2009); https://doi.org/10.1016/j.enconman.2009.04.035.
   Google Scholar
• J. R. HARTENSTINE, W. G. ANDERSON, and R. BONNER, “Titanium Loop Heat Pipes for Space Nuclear Power Systems,” AIP Conf. Proc., 969, 44 (2008); https://doi.org/10.1063/1.2845001.
   Google Scholar
• E. GREENSPAN, “A Solid-Core Heat-Pipe Nuclear Battery Type Reactor,” University of California, Berkeley (2008); https://www.osti.gov/servlets/purl/940911 (current as of Feb. 13, 2022).
   Google Scholar
• J. D. BESS, “A Basic LEGO Reactor Design for the Provision of Lunar Surface Power,” Idaho National Laboratory (2008); https://www.osti.gov/servlets/purl/935462-WNhlWU/ (current as of Feb. 13, 2022).
   Google Scholar
• M. EADES et al., “Space Molten Salt Reactor Design Considerations and Research Needs,” Proc. Nuclear and Emerging Technologies for Space, April 26–30, 2021, Oak Ridge, Tennessee, p. 3070, Oak Ridge National Laboratory (2012).
   Google Scholar
• M. E. BETTENCOURT, “Fluidic and Neutronic Coupled Modeling of the Space Molten Salt Reactor Concept,” The Ohio State University (2013).
   Google Scholar
• Y. YUAN et al., “Study on Startup Characteristics of Heat Pipe Cooled and AMTEC Conversion Space Reactor System,” Prog. Nucl. Energy, 86, 18 (2016); https://doi.org/10.1016/j.pnucene.2015.10.002.
   Google Scholar
• X. WANG et al., “Neutron Physics of the Liquid-Fuel Heat-Pipe Reactor Concept with Molten Salt Fuel—Static Calculations,” Int. J. Energy Res., 43, 14, 7852 (2019); https://doi.org/10.1002/er.4642.
   Google Scholar
• M. A. GIBSON et al., “Development of NASA’s Small Fission Power System for Science and Human Exploration,” National Aeronautics and Space Administration (2015); https://ntrs.nasa.gov/citations/20140017750 (current as of Feb. 13, 2022).
   Google Scholar
• D. BEARD, C. TARAU, and W. G. ANDERSON, “Sodium Heat Pipes for Spacecraft Fission Power Generation,” Proc. 15th Int. Energy Conversion Engineering Conference, Atlanta, Georgia, July 10–12, 2017, American Institute of Aeronautics and Astronautics (2017); https://doi.org/10.2514/6.2017-5087.
   Google Scholar
• M. A. GIBSON et al., “NASA’s Kilopower Reactor Development and the Path to Higher Power Missions,” National Aeronautics and Space Administration (2017); https://ntrs.nasa.gov/citations/20170002010 (current as of Feb. 13, 2022).
   Google Scholar
• D. I. POSTON, M. GIBSON, and P. MCCLURE, “Kilopower Reactors for Potential Space Exploration Missions,” Proc. Topl. Mtg. Nuclear and Emerging Technologies for Space, Richland, Washington, February 25–28, 2019, American Nuclear Society (2019).
   Google Scholar
• D. I. POSTON et al., “Results of the KRUSTY Nuclear System Test,” Nucl. Technol., 206, Suppl. 1, S89 (2020); https://doi.org/10.1080/00295450.2020.1730673.
   Google Scholar
• P. R. HUEBOTTER and G. A. MCLENNAN, “ Fast Reactor Power Plant Design Having Heat Pipe Heat Exchanger,” US 4560533 A, United States Patent Office (1984); https://www.lens.org/lens/patent/088-538-890-111-13X (current as of Feb. 13, 2022).
   Google Scholar
• V. E. HAMPEL, “Underground Nuclear Power Station Using Self-Regulating Heat-Pipe Controlled Reactors,” US4851183, United States Patent Office (1989); https://www.osti.gov/biblio/5197028 (current as of Feb. 13, 2022).
   Google Scholar
• K. OHASHI, H. HAYAKAWA, and M. YAMADA, “Preliminary Study on the Application of the Heat Pipe to the Passive Decay Heat Removal System of the Modular HTR,” Prog. Nucl. Energy, 32, 3–4, 587 (1998); https://doi.org/10.1016/S0149-1970(97)00047-4.
   Google Scholar
• S.-H. KIM et al., “Design Verification Program of SMART,” Proc. Int. Conf. Global Environment and Advanced Nuclear Power Plants (GENES4/ANP2003), Kyoto, Japan, September 15–19, 2003, paper 1047, Atomic Energy Society of Japan (2003).
   Google Scholar
• M. MOCHIZUKI et al., “Nuclear Reactor Must Need Heat Pipe for Cooling,” Front. Heat Pipes, 2, 033001 (2011).
   Google Scholar
• C. WANG et al., “Study on the Characteristics of the Sodium Heat Pipe in Passive Residual Heat Removal System of Molten Salt Reactor,” Nucl. Eng. Des., 265, 691 (2013); https://doi.org/10.1016/j.nucengdes.2013.09.023.
   Web of Science ®Google Scholar
• C. WANG et al., “Transient Behavior of the Sodium-Potassium Alloy Heat Pipe in Passive Residual Heat Removal System of Molten Salt Reactor,” Prog. Nucl. Energy, 68, 142 (2013); https://doi.org/10.1016/j.pnucene.2013.07.001.
   Web of Science ®Google Scholar
• Y. S. JEONG et al., “Feasibility Study of Hybrid Heat Pipe with Control Rod as Passive In-Core Cooling System for Advanced Nuclear Power Plant,” Proc. 16th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics (NURETH-16), Chicago, Illinois, August 30–September 4, 2015, American Nuclear Society (2015).
   Google Scholar
• K. M. KIM and I. C. BANG, “Heat Transfer Characteristics and Operation Limit of Pressurized Hybrid Heat Pipe for Small Modular Reactors,” Appl. Therm. Eng., 112, 560 (2017); https://doi.org/10.1016/j.applthermaleng.2016.10.077.
   Google Scholar
• K. M. KIM and I. C. BANG, “Thermal-Hydraulic Phenomena Inside Hybrid Heat Pipe-Control Rod for Passive Heat Removal,” Int. J. Heat Mass Transfer, 119, 472 (2018); https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.138.
   Google Scholar
• P. R. MCCLURE et al., “Design of Megawatt Power Level Heat Pipe Reactors,” Los Alamos National Laboratory (2015); https://doi.org/10.2172/1226133.
   Google Scholar
• I. I. SVIRIDENKO et al., “Passive Residual Heat Removal System for WWER with the Thermosiphon Heat Exchange Equipment,” Int. J. Energy Clean Environ., 16, 1–4, 209 (2015); https://doi.org/10.1615/InterJEnerCleanEnv.2015015683.
   Google Scholar
• J. W. STERBENTZ et al., “Special Purpose Nuclear Reactor (5 MW) for Reliable Power at Remote Sites Assessment Report,” Idaho National Laboratory (2017); https://doi.org/10.2172/1410224.
   Google Scholar
• J. W. STERBENTZ et al., “Preliminary Assessment of Two Alternative Core Design Concepts for the Special Purpose Reactor,” Idaho National Laboratory (2018); https://doi.org/10.2172/1413987.
   Google Scholar
• A. LEVINSKY et al., “Westinghouse eVinciTM Reactor for Off-Grid Markets,” Trans. Am. Nucl. Soc., 119, 931 (2018).
   Google Scholar
• J. C. KENNEDY et al., “Special Purpose Application Reactors: System Integration Decision Support,” Idaho National Laboratory (2019); https://doi.org/10.2172/1475413.
   Google Scholar
• P. SABHARWALL et al., “Application of Integrated Modeling and Simulation Capabilities for Full Scale Multiphysics Simulation of Microreactor Concepts,” Idaho National Laboratory (2019); https://inldigitallibrary.inl.gov/sites/sti/sti/Sort_19803.pdf (current as of Feb. 13, 2022).
   Google Scholar
• R. HERNANDEZ, M. TODOSOW, and N. R. BROWN, “Micro Heat Pipe Nuclear Reactor Concepts: Analysis of Fuel Cycle Performance and Environmental Impacts,” Ann. Nucl. Eng., 126, 419 (2019); https://doi.org/10.1016/j.anucene.2018.11.050.
   Google Scholar
• C.-Y. XIE et al., “Numerical Simulation and Experimental Investigation of Heat Pipe Heat Exchanger Applied in Residual Heat Removal System,” Ann. Nucl. Eng., 133, 568 (2019); https://doi.org/10.1016/j.anucene.2019.07.009.
   Google Scholar
• B. CAI et al., “Neutronic Design for Heat Pipe Reactor with Annular and Accident Tolerant Fuels,” Front. Energy Res., 9, 678262 (2021); https://doi.org/10.3389/fenrg.2021.678262.
   Google Scholar
• D. Y. CUI et al., “Preconceptual Nuclear Design of a 50 kWth Heat Pipe Cooled Micro Molten Salt Reactor (Micro-MSR),” Prog. Nucl. Energy, 134, 103670 (2021); https://doi.org/10.1016/j.pnucene.2021.103670.
   Google Scholar
• C. HU et al., “Effect of Heat Pipe Failure on Performance of Residual Heat Removal System with Heat Pipe for Small Lead-Based Reactor,” E3S Web Conf., 248, 01021 (2021); https://doi.org/10.1051/e3sconf/202124801021.
   Google Scholar
• D. WANG and Y. GUO, “Preliminary Design of a Heat Pipe-Cooled Blanket for CFETR,” Energies, 14, 21, 6879 (2021); https://doi.org/10.3390/en14216879.
   Google Scholar
• G. A. EL-AWADI et al., “Improving the Performance of the Cryogenic Heat Pipe-Target System for the COSY-TOF Experiment,” Vacuum, 83, 11, 1321 (2009); https://doi.org/10.1016/j.vacuum.2009.04.039.
   Google Scholar
• R. E. NYGREN et al., “Post-Test Examination of a Li-Ta Heat Pipe Exposed to H Plasma in Magnum PSI,” Fusion Eng. Des., 146, Part B, 2603 (2019); https://doi.org/10.1016/j.fusengdes.2019.04.053.
   Google Scholar
• Y. BOUAICHAOUI, A. BELKAID, and S. A. AMZERT, “Economic and Safety Aspects in Nuclear Seawater Desalination,” Procedia Eng., 33, 146 (2012); https://doi.org/10.1016/j.proeng.2012.01.1187.
   Google Scholar
• H. JOUHARA, V. ANASTAOV, and I. KHAMIS, “Potential of Heat Pipe Technology in Nuclear Seawater Desalination,” Desalination, 249, 3, 1055 (2009); https://doi.org/10.1016/j.desal.2009.05.019.
   Web of Science ®Google Scholar
• Z. XIONG et al., “The Thermal Performance of a Loop-Type Heat Pipe for Passively Removing Residual Heat from Spent Fuel Pool,” Nucl. Eng. Des., 280, 262 (2014); https://doi.org/10.1016/j.nucengdes.2014.09.022.
   Google Scholar
• Z. XIONG et al., “Experimental Study on Heat Pipe Heat Removal Capacity for Passive Cooling of Spent Fuel Pool,” Ann. Nucl. Energy, 83, 258 (2015); https://doi.org/10.1016/j.anucene.2015.03.045.
   Web of Science ®Google Scholar
• Z. XIONG et al., “Experimental Study on the Sub-Atmospheric Loop Heat Pipe Passive Cooling System for Spent Fuel Pool,” Prog. Nucl. Energy, 79, 40 (2015); https://doi.org/10.1016/j.pnucene.2014.10.015.
   Google Scholar
• Y. S. JEONG and I. C. BANG, “Hybrid Heat Pipe Based Passive Cooling Device for Spent Nuclear Fuel Dry Storage Cask,” Appl. Therm. Eng., 96, 277 (2016); https://doi.org/10.1016/j.applthermaleng.2015.11.086.
   Web of Science ®Google Scholar
• A. ROSIDI, N. PUTRA, and M. H. KUSUMA, “Effect of Graphenenano-Fluid on Heat Pipe Thermal Performance for Passive Heat Removal in Nuclear Spent Fuel Storage Pool,” IOP Conf. Ser., 105 (2017); https://iopscience.iop.org/article/10.1088/1755-1315/105/1/012030 (current as of Feb. 13, 2022).
   Google Scholar
• M. H. KUSUMA et al., “Passive Cooling System in a Nuclear Spent Fuel Pool Using a Vertical Straight Wickless-Heat Pipe,” Int. J. Therm. Sci., 126, 162 (2018); https://doi.org/10.1016/j.ijthermalsci.2017.12.033.
   Google Scholar
• K. LAI et al., “The Study of Passive Cooling System Assisted with Separate Heat Pipe for Decay Heat Removal in Spent Fuel Pool,” Ann. Nucl. Eng., 111, 523 (2018); https://doi.org/10.1016/j.anucene.2017.08.062.
   Google Scholar
• Y. KUANG, C. YI, and W. WANG, “Heat Transfer Performance Analysis of a Large-Scale Separate Heat Pipe with a Built-In Tube,” Appl. Therm. Eng., 167, 114716 (2020); https://doi.org/10.1016/j.applthermaleng.2019.114716.
   Google Scholar
• J. CHOI, C. LIM, and H. KIM, “Fork-End Heat Pipe for Passive Air Cooling of Spent Nuclear Fuel Pool,” Nucl. Eng. Des., 374, 111081 (2021); https://doi.org/10.1016/j.nucengdes.2021.111081.
   Web of Science ®Google Scholar
• M. S. EL-GENK and J.-M. TOURNIER, “Uses of Liquid-Metal and Water Heat Pipes in Space Reactor Power Systems,” Front. Heat Pipes, 2, 013002 (2011).
   Google Scholar
• A. FAGHRI, “Heat Pipes: Review, Opportunities and Challenges,” Front. Heat Pipes, 5, 1 (2014).
   Google Scholar
• J. H. JANG, “Startup Characteristics of a Potassium Heat Pipe from the Frozen State,” J. Thermophys. Heat Transfer, 9, 1 (1995); https://doi.org/10.2514/3.636.
   Google Scholar
• A. FAGHRI, M. BUCHKO, and Y. CAO, “A Study of High-Temperature Heat Pipes with Multiple Heat Sources and Sinks: Part I—Experimental Methodology and Frozen Startup Profiles,” ASME J. Heat Transfer, 113, 4, 1003 (1991); https://doi.org/10.1115/1.2911193.
   Web of Science ®Google Scholar
• D. E. GLASS, M. A. MERRIGAN, and J. T. SENA, “Start Up of a Nb-1%Zr Potassium Heat Pipe from the Frozen State,” National Aeronautics and Space Administration (1998).
   Google Scholar
• Y. MA et al., “Effect of Inclination Angle on the Startup of a Frozen Sodium Heat Pipe,” Appl. Therm. Eng., 201, 117625 (2022); https://doi.org/10.1016/j.applthermaleng.2021.117625.
   Web of Science ®Google Scholar
• H.-X. CHEN et al., “Experimental Study on Frozen Startup and Heat Transfer Characteristics of a Cesium Heat Pipe Under Horizontal State,” Int. J. Heat Mass Transfer, 183, 122105 (2022); https://doi.org/10.1016/j.ijheatmasstransfer.2021.122105.
   Web of Science ®Google Scholar
• M. S. EL-GENK and L. HUANG, “An Experimental Investigation of the Transient Response of a Water Heat Pipe,” Int. J. Heat Mass Transfer, 36, 15, 3823 (1993).
   Web of Science ®Google Scholar
• K. M. KIM et al., “Development of Passive In-Core Cooling System for Nuclear Safety Using Hybrid Heat Pipe,” Nucl. Technol., 196, 3, 598 (2016); https://doi.org/10.13182/NT16-32.
   Web of Science ®Google Scholar
• I. G. KIM et al., “Performance of Annular Flow Path Heat Pipe with a Polymer Insert Controlling Compactness for Energy Applications,” Int. J. Heat Mass Transfer, 92, 929 (2016); https://doi.org/10.1016/j.ijheatmasstransfer.2015.09.037.
   Google Scholar
• T. THARAYIL et al., “Effect of Filling Ratio on the Performance of a Novel Miniature Loop Heat Pipe Having Different Diameter Transport Lines,” Appl. Therm. Eng., 106, 588 (2016); https://doi.org/10.1016/j.applthermaleng.2016.05.125.
   Web of Science ®Google Scholar
• Y. WANG et al., “LHP Heat Transfer Performance: A Comparison Study About Sintered Copper Powder Wick and Copper Mesh Wick,” Appl. Therm. Eng., 92, 104 (2016); https://doi.org/10.1016/j.applthermaleng.2015.08.109.
   Google Scholar
• M. MOCHIZUKI et al., “Heat Pipe Based Passive Emergency Core Cooling System for Safe Shutdown of Nuclear Power Reactor,” Appl. Therm. Eng., 73, 1, 699 (2014); https://doi.org/10.1016/j.applthermaleng.2014.07.004.
   Google Scholar
• W. TENG, X. WANG, and Y. ZHU, “Experimental Investigations on Start-Up and Thermal Performance of Sodium Heat Pipe Under Swing Conditions,” Int. J. Heat Mass Transfer, 152, 119505 (2020); https://doi.org/10.1016/j.ijheatmasstransfer.2020.119505.
   Web of Science ®Google Scholar
• C. WANG et al., “Experimental Study on Transient Performance of Heat Pipe-Cooled Passive Residual Heat Removal System of a Molten Salt Reactor,” Prog. Nucl. Energy, 118, 103113 (2020); https://doi.org/10.1016/j.pnucene.2019.103113.
   Web of Science ®Google Scholar
• C. WANG et al., “Experimental Study on Heat Pipe Thermoelectric Generator for Industrial High Temperature Waste Heat Recovery,” Appl. Therm. Eng., 175, 115299 (2020); https://doi.org/10.1016/j.applthermaleng.2020.115299.
   Google Scholar
• C. WANG et al., “Experimental Study on Heat Transfer Limit of High Temperature Potassium Heat Pipe for Advanced Reactors,” Ann. Nucl. Eng., 151, 107935 (2021); https://doi.org/10.1016/j.anucene.2020.107935.
   Google Scholar
• Z. TIAN et al., “Experimental Investigation on the Heat Transfer Performance of High-Temperature Potassium Heat Pipe for Nuclear Reactor,” Nucl. Eng. Des., 378, 111182 (2021); https://doi.org/10.1016/j.nucengdes.2021.111182.
   Web of Science ®Google Scholar
• Y. JI et al., “Study on Adaptive Heat Transfer Performance of High Temperature Heat Pipe,” Ann. Nucl. Eng., 163, 108536 (2021); https://doi.org/10.1016/j.anucene.2021.108536.
   Google Scholar
• H. SUN et al., “Experiment Study on Thermal Behavior of a Horizontal High-Temperature Heat Pipe Under Motion Conditions,” Ann. Nucl. Eng., 165, 108760 (2022); https://doi.org/10.1016/j.anucene.2021.108760.
   Google Scholar
• W. LING et al., “Thermal Performance of Loop Heat Pipes with Smooth and Rough Porous Copper Fiber Sintered Sheets,” Energy Convers. Manage., 153, 323 (2017); https://doi.org/10.1016/j.enconman.2017.10.009.
   Google Scholar
• B. ZOHURI, “Heat Pipe Application in Fission Driven Nuclear Power Plant,” Int. J. Earth Environ. Sci., 4, 166 (2019); https://doi.org/10.15344/2456-351X/2019/166.
   Google Scholar
• K. NAKAMURA, K. ODAGIRI, and H. NAGANO, “Study on a Loop Heat Pipe for a Long-Distance Heat Transport Under Anti-Gravity Condition,” Appl. Therm. Eng., 107, 167 (2016); https://doi.org/10.1016/j.applthermaleng.2016.06.162.
   Web of Science ®Google Scholar
• J.-M. TOURNIER and M. S. EL-GENK, “Modeling of the Startup of a Horizontal Lithium Heat Pipe from a Frozen State,” Proc. 35th Natl. Heat Transfer Conf (NHTC’01), Anaheim, California, June 10–12, 2001.
   Google Scholar
• M. M. SWARTZ et al., “Westinghouse eVinciTM Heat Pipe Microreactor Technology Development,” Proc. 28th Conf. Nuclear Engineering, Virtual Conference, August 4–6, 2021, ASME (2021).
   Google Scholar
• V. L. TRUJILLO, E. S. KEDDY, and M. A. MERRIGAN, “High-Temperature, Deployable, Membrane Heat Pipe Radiator Element; Demonstration and Status,” Los Alamos National Laboratory (1990); https://www.osti.gov/biblio/5383181 (current as of Feb. 13, 2022).
   Google Scholar
• H. MROUE et al., “Experimental and Numerical Investigation of an Air-to-Water Heat Pipe-Based Heat Exchanger,” Appl. Therm. Eng., 78, 339 (2015); https://doi.org/10.1016/j.applthermaleng.2015.01.005.
   Web of Science ®Google Scholar
• J. SEO and J.-Y. LEE, “Length Effect on Entrainment Limitation of Vertical Wickless Heat Pipe,” Int. J. Heat Mass Transfer, 101, 373 (2016); https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.096.
   Web of Science ®Google Scholar
• J. SEO, I.-C. BANG, and J.-Y. LEE, “Length Effect on Entrainment Limit of Large-L/D Vertical Heat Pipe,” Int. J. Heat Mass Transfer, 97, 751 (2016); https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.065.
   Google Scholar
• M. PETRUCCI and A. FAGHRI, “Multiple Evaporator and Condenser Loop Thermosyphon System for Passive Cooling of Liquid-Fuel Molten Salt Nuclear Reactors,” Nucl. Eng. Des., 370, 110936 (2020); https://doi.org/10.1016/j.nucengdes.2020.110936.
   Web of Science ®Google Scholar
• H. JOUHARA et al., “Experimental and Theoretical Investigation of the Performance of an Air to Water Multi-Pass Heat Pipe-Based Heat Exchanger,” Energy, 219, 119624 (2021); https://doi.org/10.1016/j.energy.2020.119624.
   Google Scholar
• W. FU et al., “Investigation of a Long Term Passive Cooling System Using Two-Phase Thermosyphon Loops for the Nuclear Reactor Spent Fuel Pool,” Ann. Nucl. Eng., 85, 346 (2015); https://doi.org/10.1016/j.anucene.2015.05.026.
   Google Scholar
• M. H. KUSUMA et al., “Investigation of the Thermal Performance of a Vertical Two-Phase Closed Thermosyphon as a Passive Cooling System for a Nuclear Reactor Spent Fuel Storage Pool,” Nucl. Eng. Technol., 49, 3, 476 (2017); https://doi.org/10.1016/j.net.2016.10.008.
   Google Scholar
• I. G. KIM et al., “Flow Visualization and Heat Transfer Performance of Annular Thermosyphon Heat Pipe,” Appl. Therm. Eng., 125, 1456 (2017); https://doi.org/10.1016/j.applthermaleng.2017.07.116.
   Google Scholar
• I. G. KIM and I. C. BANG, “Spent Nuclear Fuel with a Hybrid Heat Pipe for Electricity Generation and Thermal Management,” Energy Convers. Manage., 173, 233 (2018); https://doi.org/10.1016/j.enconman.2018.07.084.
   Google Scholar
• S. K. MUNIAPPAN and S. K. ARUMUGAM, “Experimental Investigations on an Axial Grooved Cryogenic Heat Pipe,” Therm. Sci., 16, 1, 133 (2012); https://doi.org/10.2298/TSCI100805056S.
   Google Scholar
• I. G. KIM et al., “Experimental Investigations of Vertical and Horizontal Heat Pipes,” Trans. Korean Nuclear Society Autumn Meeting, Pyongchang, Korea, October 29–31, 2014.
   Google Scholar
• M. KUMAR et al., “Effect of Surface Tension Variation of the Working Fluid on the Performance of a Closed Loop Pulsating Heat Pipe,” Heat Transfer Eng., 40, 7, 509 (2019); https://doi.org/10.1080/01457632.2018.1436390.
   Web of Science ®Google Scholar
• J. E. DEVERALL, J. E. KEMME, and L. W. FLORSCHUETZ, “Sonic Limitations and Startup Problems of Heat Pipes,” Los Alamos National Laboratory (1970).
   Google Scholar
• T. YAMAMOTO et al., “Experimental Study of Mercury Heat Pipe,” Exp. Therm. Fluid Sci., 9, 1, 39 (1994); https://doi.org/10.1016/0894-1777(94)90006-X.
   Google Scholar
• W. G. ANDERSON et al., “Evaluation of Heat Pipe Working Fluids in the Temperature Range 450 to 700 K,” AIP Conf. Proc., 699, 20 (2004); https://doi.org/10.1063/1.1649553.
   Google Scholar
• X. ZHANG et al., “Analysis on Heat Transfer and Start-Up Performance of Mercury Heat Pipe,” E3S Web Conf., 245, 03012 (2021); https://doi.org/10.1051/e3sconf/202124503012.
   Google Scholar
• Z. Z. NEZAM and B. ZOHURI, “Heat Pipe as a Passive Cooling System Driving New Generation of Nuclear Power Plants,” Edelweiss Chem. Sci. J., 3, 1, 30 (2021); https://doi.org/10.33805/2641-7383.121.
   Google Scholar
• C. HU et al., “Analysis on Start Up and Heat Transfer Performance of Mercury Heat Pipe Under Alternating Heating Power,” E3S Web Conf., 248, 01004 (2021); https://doi.org/10.1051/e3sconf/202124801004.
   Google Scholar
• P. M. DUSSINGER et al., “Design and Testing of Titanium/Cesium and Titanium/Potassium Heat Pipes,” Proc. 3rd Int. Energy Conversion Engineering Conf., San Francisco, California, August 15–18, 2005, American Institute of Aeronautics and Astronautics (2005).
   Google Scholar
• D. BUDEN, “Summary of Space Nuclear Reactor Power Systems, 1983–1992,” Idaho National Engineering Laboratory (1993); https://www.osti.gov/biblio/10151265 (current as of Feb. 13, 2022).
   Google Scholar
• K. A. WOLOSHUN et al., “High Temperature Heat Pipe Experiments Aboard the Space Shuttle,” AIP Conf. Proc., 271, 523 (1993); https://doi.org/10.1063/1.43064.
   Google Scholar
• T. J. DICKINSON, “Performance Analysis of a Liquid Metal Heat Pipe Space Shuttle Experiment,” Air Force Institute of Technology (1996).
   Google Scholar
• Y. Y. PARK, Y. S. JEONG, and I. C. BANG, “Design Study of Heat Pipes for Nuclear Spaceship Applications,” Trans. Korean Nuclear Society Spring Meeting, Jeju, Korea, May 23–24, 2019.
   Google Scholar
• H. ZOHURI, S. LAM, and C. FORSBERG, “Heat-Pipe Heat Exchangers for Salt-Cooled Fission and Fusion Reactors to Avoid Salt Freezing and Control Tritium: A Review,” Nucl. Technol., 206, 11, 1642 (2020); https://doi.org/10.1080/00295450.2019.1681222.
   Web of Science ®Google Scholar
• J.-M. TOURNIER and M. S. EL-GENK, “Startup of a Horizontal Lithium-Molybdenum Heat Pipe from a Frozen State,” Int. J. Heat Mass Transfer, 46, 4, 671 (2003); https://doi.org/10.1016/S0017-9310(02)00324-1.
   Web of Science ®Google Scholar
• R. PONNAPPAN, “Studies on the Startup Transients and Performance of a Gas Loaded Sodium Heat Pipe,” Wright-Patterson Air Force Base (1989); https://www.osti.gov/biblio/7006928 (current as of Feb. 13, 2022).
   Google Scholar
• O. R. MIRELES and M. G. HOUTS, “Transient Response to Rapid Cooling of a Stainless Steel Sodium Heat Pipe,” Proc. Nuclear and Emerging Technologies for Space 2011, Albuquerque, New Mexico, February 7–10, 2011; https://ntrs.nasa.gov/citations/20110008814 (current as of Feb. 13, 2022).
   Google Scholar
• X. JI et al., “Experimental Study of Heat Transfer and Start-Up of Loop Heat Pipe with Multiscale Porous Wicks,” Appl. Therm. Eng., 117, 782 (2017); https://doi.org/10.1016/j.applthermaleng.2017.01.084.
   Google Scholar
• R. LAUBSCHER and R. T. DOBSON, “Theoretical and Experimental Modeling of a Heat Pipe Heat Exchanger for High Temperature Nuclear Reactor Technology,” Appl. Therm. Eng., 61, 2, 259 (2013); https://doi.org/10.1016/j.applthermaleng.2013.06.063.
   Google Scholar
• Y. XIONG et al., “A Characteristic Study on the Start-Up Performance of Molten-Salt Heat Pipes: Experimental Investigation,” Exp. Therm. Fluid Sci., 82, 433 (2017); https://doi.org/10.1016/j.expthermflusci.2016.11.031.
   Google Scholar
• S.-W. KANG et al., “Manufacture and Test of a High Temperature Heat Pipe,” J. Appl. Sci. Eng., 22, 3, 493 (2019).
   Google Scholar
• S. TANG et al., “Thermoelectric Performance Study on a Heat Pipe Thermoelectric Generator for Micro Nuclear Reactor Application,” Int. J. Energy Res., 45, 8, 12301 (2020); https://doi.org/10.1002/er.6450.
   Google Scholar
• H.-M. LEE et al., “Stainless Steel Heat Pipe Fabrication, Performance Testing and Modeling,” Energy Procedia, 105, 4745 (2017); https://doi.org/10.1016/j.egypro.2017.03.1032.
   Google Scholar
• C. WANG et al., “Performance Analysis of Heat Pipe Radiator Unit for Space Nuclear Power Reactor,” Ann. Nucl. Eng., 103, 74 (2017); https://doi.org/10.1016/j.anucene.2017.01.015.
   Google Scholar
• K. K. PANDA, I. V. DULERA, and A. BASAK, “Numerical Simulation of High Temperature Sodium Heat Pipe for Passive Heat Removal in Nuclear Reactors,” Nucl. Eng. Des., 323, 376 (2017); https://doi.org/10.1016/j.nucengdes.2017.03.023.
   Web of Science ®Google Scholar
• N. PUTRA et al., “Visualization of the Boiling Phenomenon Inside a Heat Pipe Using Neutron Radiography,” Exp. Therm. Fluid Sci., 66, 13 (2015); https://doi.org/10.1016/j.expthermflusci.2015.02.026.
   Google Scholar
• M. B. PARKER, “Applications of Heat Pipes to Nuclear Reactor Engineering,” Iowa State University (1970).
   Google Scholar
• W. A. RANKEN, “The Status of High-Temperature Heat Pipe Technology,” Los Alamos National Laboratory (1982); https://digital.library.unt.edu/ark:/67531/metadc1190825/ (current as of Feb. 13, 2022).
   Google Scholar
• R. S. REID, M. A. MERRIGAN, and J. T. SENA, “Review of Liquid Metal Heat Pipe Work at Los Alamos,” AIP Conf. Proc., 217, 999 (1991); https://doi.org/10.1063/1.40058.
   Google Scholar
• R. S. REID and M. A. MERRIGAN, “Heat Pipe Activity in the Americas—1990 to 1995,” Los Alamos National Laboratory (1995).
   Google Scholar
• S. M. BRAGG-SITTON et al., “Ongoing Space Nuclear Systems Development in the United States,” Idaho National Laboratory (2011).
   Google Scholar
• H. JOUHARA et al., “Heat Pipe Based Systems—Advances and Applications,” Energy, 128, 729 (2017); https://doi.org/10.1016/j.energy.2017.04.028.
   Web of Science ®Google Scholar
• P. MCCLURE et al., “Database of Previous Research Supporting Microreactor Designs,” Idaho National Laboratory (2018); https://doi.org/10.2172/1824207.
   Google Scholar
• D. Q. WANG, B. H. YAN, and J. Y. CHEN, “The Opportunities and Challenges of Micro Heat Pipe Cooled Reactor System with High Efficiency Energy Conversion Units,” Ann. Nucl. Eng., 149, 107808 (2020); https://doi.org/10.1016/j.anucene.2020.107808.
   Google Scholar
• B. H. YAN, C. WANG, and L. G. LI, “The Technology of Micro Heat Pipe Cooled Reactor: A Review,” Ann. Nucl. Eng., 135, 106948 (2020); https://doi.org/10.1016/j.anucene.2019.106948.
   Web of Science ®Google Scholar
• C. MUELLER and P. TSVETKOV, “A Review of Heat-Pipe Modeling and Simulation Approaches in Nuclear Systems Design and Analysis,” Ann. Nucl. Eng., 160, 108393 (2021); https://doi.org/10.1016/j.anucene.2021.108393.
   Web of Science ®Google Scholar
• P. D. CRAVEN and M. P. SANSOUCIE, “Lightweight Damage Tolerant, High-Temperature Radiators for Nuclear Power and Propulsion,” National Aeronautics and Space Administration (2015); https://ntrs.nasa.gov/citations/20160008044 (current as of Feb. 13, 2022).
   Google Scholar
• R. W. HYERS and B. N. TOMBOULIAN, “Lightweight, High-Temperature Radiator for Space Propulsion,” National Aeronautics and Space Administration (2012); https://ntrs.nasa.gov/citations/20130001608 (current as of Feb. 13, 2022).
   Google Scholar
• W. G. ANDERSON and C. TARAU, “Variable Conductance Heat Pipes for Radioisotope Stirling Systems,” AIP Conf. Proc., 969, 679 (2008); https://doi.org/10.1063/1.2845031.
   Google Scholar
• I. V. DULERA et al., “High Temperature Reactor Technology Development in India,” Prog. Nucl. Eng., 101, 82 (2017); https://doi.org/10.1016/j.pnucene.2017.04.020.
   Google Scholar
• E. D. THROM, “Regulatory Analysis for the Resolution of Generic Issue 82, ‘Beyond Design Basis Accidents in Spent Fuel Pools,’” U.S. Nuclear Regulatory Commission (1989); https://www.osti.gov/servlets/purl/6113293 (current as of Feb. 13, 2022).
   Google Scholar
• “Long Term Storage of Spent Nuclear Fuel—Survey and Recommendations,” IAEA-TECDOC-1293, International Atomic Energy Agency (2002).
   Google Scholar