Investigation of the Inhomogeneous Mechanical and Crack Driving Force of Low Alloy Steel SA508 and Its Welded 309L/308L Stainless Steel Cladding

References

• B. O. OKONKWO et al., “Microscale Investigation of the Correlation Between Microstructure and Galvanic Corrosion of Low Alloy Steel A508 and Its Welded 309/308L Stainless Steel Overlayer,” Corros. Sci., 154, 49 (2019); https://doi.org/10.1016/j.corsci.2019.03.027.
   Web of Science ®Google Scholar
• L. LI et al., “Effect of pH on Pitting Corrosion of Stainless Steel Welds in Alkaline Salt Water,” Constr. Build. Mater., 68, 709 (2014); https://doi.org/10.1016/j.conbuildmat.2014.06.090.
   Web of Science ®Google Scholar
• B. O. OKONKWO et al., “Microstructural Characterization of Low Alloy Steel A508–309/308L Stainless Steel Dissimilar Weld Metals,” Int. J. Press. Vessels Pip., 190, 104297 (2021); https://doi.org/10.1016/j.ijpvp.2020.104297.
   Web of Science ®Google Scholar
• Q. WANG et al., “Study of Type-II Boundary Behavior During SA508-3/EQ309L Overlay Weld Interfacial Failure Process,” J. Mater. Process. Technol., 247, 64 (2017); https://doi.org/10.1016/j.jmatprotec.2017.04.009.
   Web of Science ®Google Scholar
• G. F. LI and J. CONGLETON, “Stress Corrosion Cracking of a Low Alloy Steel to Stainless Steel Transition Weld in PWR Primary Waters at 292°C,” Corros. Sci., 42, 6, 1005 (2000); https://doi.org/10.1016/S0010-938X(99)00131-6.
   Web of Science ®Google Scholar
• E. RAHIMI et al., “Correlation of Surface Volta Potential with Galvanic Corrosion Initiation Sites in Solid-State Welded Ti-Cu Bimetal Using AFM-SKPFM,” Corros. Sci., 140, 30 (2018); https://doi.org/10.1016/j.corsci.2018.06.026.
   Web of Science ®Google Scholar
• D. R. DIERCKS, W. J. SHACK, and J. MUSCARA, “Overview of Steam Generator Tube Degradation and Integrity Issues,” Nucl. Eng. Des., 194, 1, 19 (1999); https://doi.org/10.1016/S0029-5493(99)00167-3.
   Web of Science ®Google Scholar
• Q. XIONG et al., “Characterization of Microstructure of A508III/309L/308L Weld and Oxide Films Formed in Deaerated High-Temperature Water,” J. Nucl. Mater., 498, 227 (2018); https://doi.org/10.1016/j.jnucmat.2017.10.030.
   Web of Science ®Google Scholar
• N. LOPEZ, M. CID, and M. PUIGGALI, “Influence of O-Phase on Mechanical Properties and Corrosion Resistance of Duplex Stainless Steels,” Corros. Sci., 41, 8, 1615 (1999); https://doi.org/10.1016/S0010-938X(99)00009-8.
   Web of Science ®Google Scholar
• H. XUE, K. OGAWA, and T. SHOJI, “Effect of Welded Mechanical Heterogeneity on Local Stress and Strain Ahead of Stationary and Growing Crack Tips,” Nucl. Eng. Des., 239, 4, 628 (2009); https://doi.org/10.1016/j.nucengdes.2008.12.024.
   Web of Science ®Google Scholar
• B. QIANG and X. WANG, “Ductile Crack Growth Behaviors at Different Locations of a Weld Joint for an X80 Pipeline Steel: A Numerical Investigation Using GTN Models,” Eng. Fract. Mech., 213, 264 (2019); https://doi.org/10.1016/j.engfracmech.2019.04.009.
   Web of Science ®Google Scholar
• A. KOTOUSOV and M. F. M. JAFFAR, “Collapse Load for a Crack in a Plate with a Mismatched Welded Joint,” Eng. Fail. Anal., 13, 7, 1065 (2006); https://doi.org/10.1016/j.engfailanal.2005.07.007.
   Web of Science ®Google Scholar
• S. ZHANG et al., “Effect of Mechanical Heterogeneity on Strain and Stress Fields at Crack Tips of SCC in Dissimilar Metal Welded Joints,” Materials, 14, 16, 4450 (2021); https://doi.org/10.3390/ma14164450.
   PubMed Web of Science ®Google Scholar
• H. XUE et al., “Compilation and Application of UMAT for Mechanical Properties of Heterogeneous Metal Welded Joints in Nuclear Power Materials,” Adv. Mater. Sci. Eng., 2019, 3151823 (2019); https://doi.org/10.1155/2019/3151823.
   Web of Science ®Google Scholar
• H. XUE et al., “Characterization of Mechanical Heterogeneity in Dissimilar Metal Welded Joints,” Materials, 14, 15, 4145 (2021); https://doi.org/10.3390/ma14154145.
   PubMed Web of Science ®Google Scholar
• Z. WANG et al., “Microstructure and Pitting Behavior of the Dissimilar Metal Weld of 309L Cladding and Low Alloy Steel A533B,” J. Nucl. Mater., 508, 1 (2018); https://doi.org/10.1016/j.jnucmat.2018.05.011.
   Web of Science ®Google Scholar
• B. O. OKONKWO et al., “A New Method to Determine the Synergistic Effects of Area Ratio and Microstructure on the Galvanic Corrosion of LAS A508/309 L/308 L SS Dissimilar Metals Weld,” J. Mater. Sci. Technol., 78, 38 (2021); https://doi.org/10.1016/j.jmst.2020.10.044.
   Web of Science ®Google Scholar
• B. O. OKONKWO et al., “Galvanic Corrosion Study Between Low Alloy Steel A508 and 309/308 L Stainless Steel Dissimilar Metals: A Case Study of the Effects of Oxide Film and Exposure Time,” J. Nucl. Mater., 548, 152853 (2021); https://doi.org/10.1016/j.jnucmat.2021.152853.
   Web of Science ®Google Scholar
• S. C. YOO et al., “Effects of Thermal Aging on the Microstructure of Type-II Boundaries in Dissimilar Metal Weld Joints,” J. Nucl. Mater., 459, 5 (2015); https://doi.org/10.1016/j.jnucmat.2015.01.009.
   Web of Science ®Google Scholar
• B. GWALANI et al., “Optimizing the Coupled Effects of Hall-Petch and Precipitation Strengthening in a Al0.3CoCrFeNi High Entropy Alloy,” Mater. Des., 121, 254 (2017); https://doi.org/10.1016/j.matdes.2017.02.072.
   Web of Science ®Google Scholar
• H. T. WANG et al., “Local Mechanical Properties of a Dissimilar Metal Welded Joint in Nuclear Power Systems,” Mater. Sci. Eng., 568, 108 (2013); https://doi.org/10.1016/j.msea.2013.01.037.
   Google Scholar
• Gb/T 28896:2012, Metallic Materials—Method of Test for the Determination of Quasistatic Fracture Toughness of Welds, Standardization Administration of China, China Quality and Standards Publishing and Media Company Limited (2012).
   Google Scholar
• ISO 15653:2010, Metallic Materials—Method of Test for the Determination of Quasistatic Fracture Toughness of Welds, International Organization for Standardization Copyright Office, Geneva (2010).
   Google Scholar
• Y. PENG et al., “Characterization of Heterogeneous Constitutive Relationship of the Welded Joint Based on the Stress-Hardness Relationship Using Micro-Hardness Tests,” Constr. Build. Mater., 202, 37 (2019); https://doi.org/10.1016/j.conbuildmat.2018.12.218.
   Web of Science ®Google Scholar
• X. WU et al., “Determination of Local True Stress-Strain Response of X80 and Q235 Girth-Welded Joints Based on Digital Image Correlation and Numerical Simulation,” Int. J. Press. Vessels Pip., 188, 104232 (2020); https://doi.org/10.1016/j.ijpvp.2020.104232.
   Web of Science ®Google Scholar
• R. YAN et al., “A Method for Identifying the Boundary of Regions in Welded Coupon Specimens Using Digital Image Correlation,” Mater. Des., 210, 110073 (2021); https://doi.org/10.1016/j.matdes.2021.110073.
   Web of Science ®Google Scholar
• K. H. KLOOS and E. VELTEN, “Berechnung der Dauerschwingfestigkeit von plasmanitrierten bauteilähnlichen Proben unter Berücksichtigung des Härte-und Eigenspannungsverlaufs,” Konstruktion, 36, 5, 181 (1984).
   Google Scholar
• R. J. PARGETER, “Yield Strength from Hardness a Reappraisal for Weld Metal,” Weld. Ins. Res. Bull., 11, 325 (1978).
   Google Scholar
• D. A. LAVAN and W. N. SHARPE, “Tensile Testing of Microsamples,” Exp. Mech., 39, 3, 210 (1999); https://doi.org/10.1007/BF02323554.
   Web of Science ®Google Scholar
• S. HERTELÉ et al., “Fracture Mechanics Analysis of Heterogeneous Welds: Numerical Case Studies Involving Experimental Heterogeneity Patterns,” Eng. Fail. Anal., 58, 336 (2015); https://doi.org/10.1016/j.engfailanal.2015.07.007.
   Web of Science ®Google Scholar
• K. Y. WANG, “Research on the Disbonding Mechanism for SA508-3/EQ309L Dissimilar Joint,” Doctoral Dissertation, Shanghai Jiao Tong University (2016) (in Chinese); https://doi.org/10.27307/d.cnki.gsjtu.2016.001930.
   Google Scholar
• “ABAQUS/Standard User’s Manual, Version 2018,” Dassault Systèmes Simulia Corporation.
   Google Scholar
• L. Y. DU et al., “Effects of Local Mechanical and Fracture Properties on LBB Behavior of a Dissimilar Metal Welded Joint in Nuclear Power Plants,” Nucl. Eng. Des., 265, 145 (2013); https://doi.org/10.1016/j.nucengdes.2013.07.028.
   Web of Science ®Google Scholar
• S. J. SUNG et al., “Ductile Fracture Initiation near Axial Crack Fronts in Pressure Tubes of Hydrided Irradiated Zr-2.5 Nb Materials with Split Circumferential Hydrides,” Eng. Fract. Mech., 186, 1 (2017); https://doi.org/10.1016/j.engfracmech.2017.09.003.
   Web of Science ®Google Scholar
• S. WANG et al., “An Approach to Estimate SCC Growing Rate in Slow Strain Rate Tensile Test Based on EPFEM,” Adv. Mater. Sci. Eng., 2019, 5651890 (2019); https://doi.org/10.1155/2019/5651890.
   Web of Science ®Google Scholar
• S. WANG et al., “Effects of the Surface Crack Shape on J Values Along the Front of an Elliptical Crack,” Fatigue Fract. Eng. Mater. Struct., 44, 11, 2944 (2021); https://doi.org/10.1111/ffe.13522.
   Web of Science ®Google Scholar