204
Views
1
CrossRef citations to date
0
Altmetric
Technical Papers

Thermal-Hydraulic Analysis of the AFIP-7 Irradiation Test in the Advanced Test Reactor—Oxide Growth Prediction and Correlation

ORCID Icon, ORCID Icon, , , &
Pages 1467-1478 | Received 08 Sep 2022, Accepted 28 Nov 2022, Published online: 19 Jan 2023

References

  • C. XING et al., “Thermal Hydraulic Analysis of the AFIP-7 Irradiation Test in the Advanced Test Reactor—Model Correlation and Performance Evaluation,” Nucl. Eng. Des., 395, 111857 (2022); https://doi.org/10.1016/j.nucengdes.2022.111857.
  • B. RABIN, “Preliminary Report on U-Mo Monolithic Fuel for Research Reactors,” INL EXT-17-40975, Rev. 4, Idaho National Laboratory (2020).
  • J. C. GRIESS, H. C. SAVAGE, and J. L. ENGLISH, “Effect of Heat Flux on the Corrosion of Aluminum by Water. Part IV. Tests Relative to the Advanced Test Reactor and Correlation with Previous Results,” ORNL–3541, Oak Ridge National Laboratory (1964).
  • S. J. PAWEL, D. K. FELDE, and R. E. PAWEL, “Influence of Coolant pH on Corrosion of 6061 Aluminum Under Reactor Heat Transfer Conditions,” ORNL/TM-13083, Oak Ridge National Laboratory (1995).
  • Y. S. KIM et al., “Oxidation of Aluminum Alloy Cladding for Research and Test Reactor Fuel,” J. Nucl. Mater., 378, 2, 220 (2008); https://doi.org/10.1016/j.jnucmat.2008.06.032.
  • R. E. PAWEL, “On the Kinetics of the Aluminum-Water Reaction During Exposure in High-Heat Flux Test Loops: 1, A Computer Program for Oxidation Calculations,” ORNL/TM-10602, Oak Ridge National Laboratory (1988).
  • Y. S. KIM et al., “Prediction Model for Oxide Thickness on Aluminum Alloy Cladding During Irradiation,” presented at the 2003 Int. Mtg. on Reduced Enrichment for Research and Test Reactors, Chicago, Illinois (2003).
  • Y. S. KIM et al., “Aluminum Cladding Oxide Growth Prediction for High Flux Research Reactors,” J. Nucl. Mater., 529, 151926 (2020); https://doi.org/10.1016/j.jnucmat.2019.151926.
  • W. M. MARCUM et al., “Aluminum Cladding Oxidation of Prefilmed In-Pile Fueled Experiments,” J. Nucl. Mater., 471, 136 (2016); https://doi.org/10.1016/j.jnucmat.2016.01.011.
  • H. T. CHAE, Y. S. KIM, and A. M. YACOUT, “Overview of Aluminum Oxide Prediction Models for High Power Research Reactors,” ANL/RTR/TM-18/10, Argonne National Laboratory (2018).
  • A. B. ROBINSON et al., “AFIP-7 Post-irradiation Examination Summary Report,” INL/LTD-16-40781, Idaho National Laboratory (2016).
  • G. A. ROTH, “As-Run Thermal Analysis for the AFIP-7 Experiment Irradiated in the Center Flux Trap of the ATR, Cycles 149B and 150B,” ECAR-1894, Idaho National Laboratory (2012).
  • J. W. NIELSEN et al., “Low-Enriched Depletion Benchmarks in the Advanced Test Reactor,” presented at the Test Research and Training Reactors Annual Conf., Idaho Falls, ID (2019).
  • W. J. WILLIAMS, A. B. ROBINSON, and B. H. RABIN, “Post-irradiation Non-destructive Analyses of the AFIP-7 Experiment,” JOM, 69, 12, 2546 (2017); https://doi.org/10.1007/s11837-017-2552-y.
  • G. MOORE, “AFIP-7 Fabrication Summary Report,” INL/LTD-12-26917, Idaho National Laboratory (2012).
  • E. SHABER and G. HOFMAN, “Corrosion Minimization for Research Reactor Fuel,” INL/EXT-05-00256, Idaho National Laboratory (2005).
  • G. H. HANSON et al., “Report of the ANS Aluminum Cladding Corrosion Workshop,” CONF-8811203, Oak Ridge National Laboratory (1988).
  • R. E. PAWEL et al., “The Development of a Preliminary Correlation of Data on Oxide Growth on 6061 Aluminum Under ANS Thermal-Hydraulic Conditions,” ORNL/TM-11517, Oak Ridge National Laboratory (1990).
  • G. L. YODER et al., “The Effect of Aluminum Corrosion on the Advanced Neutron Source Reactor Fuel Design,” Nucl. Eng. Des., 136, 3, 401 (1992); http://doi.org/10.1016/0029-5493(92)90037-V.
  • F. P. INCROPERA, Fundamentals of Heat and Mass Transfer, 6th ed., John Wiley & Sons (2010).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.