Advanced search
Publication Cover
Powder Metallurgy Volume 59, 2016 - Issue 2
Journal homepage
111
Views
9
CrossRef citations to date
0
Altmetric
ARTICLES

Cr50Cu50 alloys produced from submicrometre structured powders through hot pressing at different pressures

S.-H. ChangDepartment of Materials and Mineral Resources Engineering, National Taipei University of Technology, Taipei10608, Taiwan, RO ChinaCorrespondence[email protected]
,
C. LiangDepartment of Materials and Mineral Resources Engineering, National Taipei University of Technology, Taipei10608, Taiwan, RO China
,
J.-R. HuangDepartment of Materials and Mineral Resources Engineering, National Taipei University of Technology, Taipei10608, Taiwan, RO China
&
K.-T. HuangDepartment of Auto-Mechanics, National Kangshan Agricultural Industrial Senior High School, Kaohsiung82049, Taiwan, RO China
Pages 142-147 | Received 14 Sep 2015, Accepted 05 Dec 2015, Published online: 25 May 2016

References

  • S. H. Chang and P. Y. Chang: ‘Investigation into the sintered behavior and properties of nanostructured WC-Co-Ni-Fe hard metal alloys’, Mater. Sci. Eng. A., 2014, 606, 150–156. doi: 10.1016/j.msea.2014.03.096
  • M. Khajepour and S. Sharafi: ‘Characterization of nanostructured Fe-Co-Si powder alloy’, Powder Technol., 2012, 232, 124–133. doi: 10.1016/j.powtec.2012.07.051
  • S. Sheibani, S. Heshmati-Manesh and A. Ataie: ‘Structural investigation on nano-crystalline Cu-Cr supersaturated solid solution prepared by mechanical alloying’, J. Alloy. Compd., 2010, 495, 59–62. doi: 10.1016/j.jallcom.2010.02.034
  • W. C. Cao, S. H. Liang, X. Zhang, X. H. Wang and X. H. Yang: ‘Effect of Fe on microstructures and vacuum arc characteristics of CuCr alloys’, Int. J. Refract. Met. Hard Mater., 2011, 29, 237–243. doi: 10.1016/j.ijrmhm.2010.10.012
  • W. C. Cao, S. H. Liang, X. Zhang, X. H. Wang and X. H. Yang: ‘Effect of Mo addition on microstructure and vacuum arc characteristics of CuCr50 alloy’, Vacuum, 2011, 85, 943–948. doi: 10.1016/j.vacuum.2011.02.001
  • S. H. Chang, S. H. Chen and K. T. Huang: ‘Sintered behaviors and lectrical properties of Cr50Cu50 alloy targets via vacuum sintering and HIP treatments’, Mater. Trans., 2012, 53, 1689–1694. doi: 10.2320/matertrans.M2012150
  • S. H. Chang, T. P. Tang, K. T. Huang and F. C. Tai: ‘Improvement in sintering characteristics and electrical properties of Cr60Cu40 alloy targets by hot isostatic pressing treatment’, Powder Metall., 2013, 56, 77–82. doi: 10.1179/1743290112Y.0000000038
  • S. H. Chang, S. H. Chen and K. T. Huang: ‘Effects of vacuum sintering, HIP and HP treatments on the microstructure, mechanical and electrical properties of Cr70Cu30 Alloys’, Mater. Trans., 2013, 54, 1857–1862. doi: 10.2320/matertrans.M2013173
  • C. C. Jia, L. Sun, H. Tang and X. H. Qu: ‘Hot pressing of nanometer WC-Co powder’, Int. J. Refract. Met. Hard Mater., 2007, 25, 53–56. doi: 10.1016/j.ijrmhm.2005.11.003
  • Z. H. Qiao, X. F. Ma, W. Zhao and H. G. Tang: ‘Fabrication, thermal stability and mechanical properties of novel composite hardmetals obtained by solid-state reaction and hot-pressing sintering’, Mater. Chem. Phys., 2008, 108, 364–368. doi: 10.1016/j.matchemphys.2007.10.009
  • C. X. Ouyang, S. G. Zhu and H. X. Qu: ‘VC and Cr3C2 doped WC-MgO compacts prepared by hot-pressing sintering’, Mater. Design, 2012, 40, 550–555. doi: 10.1016/j.matdes.2012.04.030
  • Z. Z. Fang, X. Wang, T. Ryu, K. S. Hwang and H. Y. Sohn: ‘Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide-A review’, Int. J. Refract. Met. Hard Mater., 2009, 27, 288–299. doi: 10.1016/j.ijrmhm.2008.07.011
  • S. Kalpakjian and S. R. Schmid: ‘Manufacturing processes for engineering Materials’, 5th edn, 2008, Singapore, Prentice Hall, Pearson Education South Asia Pte Ltd, 62–63.
  • C. Liang, S. H. Chang, J. R. Huang, K. T. Huang, S. T. Lin: ‘Investigation of Submicron Powder Fabricated Cr50Cu50 Alloys Using Various Vacuum Hot-Press Sintering Temperatures’, Mater. Trans., 2015, 56, 1127–1132. doi: 10.2320/matertrans.M2015088
  • S. H. Chang and S. L. Chen: ‘Characterization and properties of sintered WC-Co and WC-Ni-Fe hard metal alloys’, J. Alloy. Compd., 2014, 585, 407–413. doi: 10.1016/j.jallcom.2013.09.188

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.