References
- G. Bockstiegel: ‘Dimensional changes during sintering of iron copper mixes and means to reduce them’, Metallurgie, 1962, 3, (4), 67–78.
- F. V. Lenel and T. Pecanha: ‘Observations on the sintering of compacts from a mixture of iron and copper powders’, Powder Metall., 1973, 16, (32), 351–365. doi: 10.1179/pom.1973.16.32.011
- L. E. Svensson: ‘The effect of copper and nickel additions to high-compressibility sponge iron powder on the sintered properties of materials with 0.3 and 0.60% carbon’, Powder Metall., 1974, 17, (34), 271–287. doi: 10.1179/pom.17.34.1974.002
- P. F. Lindskog and G. F. Boccini: ‘Development of high strength P/M precision components in Europe', Int. J. Powder Metall. Powder Technol., 1979, 15, (3), 199–205.
- K. Majima and H. Mitani: ‘Sintering mechanism in mixed powder compacts of the Fe–Cu–C ternary system’, Trans. Jpn. Inst. Met. Appl., 1977, 18, 663–672. doi: 10.2320/matertrans1960.18.663
- N. Dautzenberg and H. J. Dorweiler: ‘Dimensional behavior of copper-carbon sintered steels', Powder Metall. Int., 1985, 17, (6), 279–283.
- S. J. Jamil and G. A. Chadwick: ‘Investigation and analysis of liquid phase sintering of Fe—Cu and Fe–Cu–C compacts’, Powder Metall., 1985, 28, (2), 65–71. doi: 10.1179/pom.1985.28.2.65
- R. L. Lawcock and D. J. Davies: ‘Effect of carbon on dimensional and microstructural characteristics of Fe–Cu compacts during sintering’, Powder Metall., 1990, 33, (2), 147–150. doi: 10.1179/pom.1990.33.2.147
- K. S. Narasimhan: ‘Sintering of powder mixtures and the growth of ferrous powder metallurgy’, Mater. Chem. Phys., 2001, 67, 56–65. doi: 10.1016/S0254-0584(00)00420-X
- H. Danninger: ‘Pore Formation During Sintering of Fe-Cu and Its effects on Mechanical Properties’, Powder Metall. Int., 19, (1), 1987, 19–23.
- A. Griff and R. M. German: ‘Dimensional control in the sintering of iron–copper–carbon via particle surface area’, Int. J. Powder Metall., 1994, 30, (4), 399–407.
- H. Fredriksson, K. Hansson and A. Olsson: ‘On the mechanism of liquid copper penetration into iron grain boundaries’, Scand. J. Metall., 2001, 30, 41–50. doi: 10.1034/j.1600-0692.2001.d01-36.x
- W. A. Kaysser, W. J. Huppman and G. Petzow: ‘Analysis of dimensional changes during sintering of Fe–Cu’, Powder Metall., 1980, 23, 86–91. doi: 10.1179/pom.1980.23.2.86
- S. Sainz, W. García, A. Karuppannagounder and F. Castro: ‘Microstructural development during sintering of PM steels with admixed nickel’, Powder Metallurgy Progress., 2007, 7, 121–127.
- F. Castro and S. Sainz: ‘Influence of Ni on hardenability of PM steels’, Adv. Powder Metall. Part. Mater., 2010, 5, 20–34.
- B. Tougas, C. Blais, M. Larouche, F. Chagnon and S. Pelletier: ‘Characterization of the Formation of Nickel Rich Areas in PM Nickel Steels and Their Effect on Mechanical Properties’, Adv. Powder Metall. Part. Mater., 2012, 5, 19–33.
- M. Momeni, C. Gierl and H. Danninger: ‘Study of the oxide reduction and interstitial contents during sintering of different plain carbon steels by in situ mass spectrometry in nitrogen atmosphere’, Mater. Chem. Phys., 2011, 129, 209–216. doi: 10.1016/j.matchemphys.2011.03.076
- H. Danninger, G. Frauendienst, K.-D. Streb and R. Ratzi: ‘Dissolution of different graphite grades during sintering of PM steels’, Mater. Chem. Phys., 2001, 67, 72–77. doi: 10.1016/S0254-0584(00)00422-3
- V. Paris, S. St-Laurent and E. Ilia: ‘Improvement of Dimensional Stability of Sinter Hardening Steel Powders’, Adv. Powder Metall. Part. Mat., 2011, 910–921.
- G. Salje and M. Feller-Kniepmeier: ‘The diffusion and solubility of copper in iron’, J. Appl. Phys., 1977, 48, 1833. doi: 10.1063/1.323934
- D. Berner, M. E. Exner and G. Petzow: ‘Swelling of iron-copper mixtures during sintering and infiltration’, Mod. Dev. Powder Metall., 1974, 6, 237–250.
- Y. Trudel and R. Angers: ‘Comparative Study of Fe-Cu-C Alloys Made From Mixed and Prealloyed Powders’, Mod. Dev. Powder Metall., 1974, 6, 305–312.