References
- H. Rutz, C. Oliver and F. Hanejko: ‘ Effects of processing and materials on soft magnetic performance of powder metallurgy parts’, Advances in powder metallurgy and particulate materials – 1992, Metal Powders Industry Federation , Princeton, NJ, 1992, 6–375.
- MPIF Standard 35: ‘Material standards for PM structural materials’, 2012 edn, 66–67; 2012, Princeton, NJ, Published by Metal Powder Industries Federation.
- T. Maeda, H. Toyoda, N. Igarashi, K. Hirose, K. Mimura, T. Nishioka and A. Ikegaya: ‘Development of super low iron-loss P/M soft magnetic material’, SEI Technical Review, June 2005, 60, 3–9.
- R. Nolan: ‘Electrically insulating phosphate coatings for iron powder based electromagnetic core applications’, Massachusetts Institute of Technology, Department of Mechanical Engineering, 2009, 24.
- R. Bozorth: ‘Ferromagnetism’, 14; 1951, Princeton, NJ, Published by Van Nostrand Company.
- F. Hanejko, G. Ellis and T. Hale: ‘Application of high performance material processing – electromagnetic products’, PM2TEC'98 Int. Conf. on ‘Powder metallurgy and particulate materials’, May 31–June 4, 1998, Metal Powders Industry Federations.
- F. J. G. Landraf and M. Emura: ‘Losses and permeability improvement by stress relieving fully processed electrical steels with previous small deformations’, J. Magn. Magn. Mater., Nov 2002, 242–245, 152–156. doi: 10.1016/S0304-8853(01)01184-2
- C. Elgelid, L. Westberg and A. Larson: US Patent # 6,562,458, 2003.
- K. Narasimhan and C. Schade: ‘Iron–silicon water atomized powders for electromagnetic applications’, PM2014 World Congress on ‘Powder metallurgy and particulate materials’ , 2014, Metal Powder Industries Federation, Manuscripts Preprints.
- P. Skoglund, O. Andersson, P. Knutnsson and H. Vidarsson: ‘Soft magnetic powder composition comprising insulated particles and a lubricant selected from organo-silanes, titanates, aluminates and zirconates and process for its preparation’, International Patent Application WO 2004/056508 A1, 2004.
- F. Semel: ‘Process determining the dimensional change of PM steels’, in ‘Advances in powder metallurgy and particulate materials’, 5–113 to 5–135; 2001, Princeton, NJ, MPIF.