References
- S. M. Tuominen and J. M. Dahl: ‘Cyclic oxidation testing of molybdenum protected by silicide coatings’, J. Less-Common Met., 1981, 81, 249–260. doi: 10.1016/0022-5088(81)90031-X
- N. Sekido, R. Sakidja and J. H. Perepezko: ‘Annealing response of point defects in off-stoichiometric Mo5SiB2 phase’, Intermetallics, 2007, 15, 1268–1276. doi: 10.1016/j.intermet.2007.03.009
- A. R. Abbasi and M. Shamanian: ‘Synthesis of Mo–Mo5SiB2–Mo3Si nanocomposite powders by two-step mechanical alloying and subsequent heat treatment’, J. Alloys Compd., 2011, 509, 8097–8104. doi: 10.1016/j.jallcom.2011.05.066
- Y. Q. Liu, G. Shao and P. Tsakiropoulos: ‘On the oxidation behavior of MoSi2’, Intermetallics, 2001, 9, 125–136. doi: 10.1016/S0966-9795(00)00114-X
- Y. Liu, G. Shao and P. Tsakiropoulos: ‘Thermodynamic reassessment of the Mo–Si and Al–Mo–Si systems’, Intermetallics, 2000, 8, 953–962. doi: 10.1016/S0966-9795(00)00068-6
- C. B. Lim, T. Yano and T. Iseki: ‘Microstructure and mechanical properties of RB-SiC/MoSi2 composite’, J. Mater. Sci., 1989, 24, 4144–4151. doi: 10.1007/BF01168987
- A. K. Vasudévan and J. J. Petrovic: ‘A comparative overview of molybdenum disilicide composites’, Mater. Sci. Eng. A, 1992, 155, 1–17. doi: 10.1016/0921-5093(92)90308-N
- J. Pan, M. K. Surappa, R. A. Saravanan, B. W. Liu and D. M. Yang: ‘Fabrication and characterization of SiC/MoSi2 composites’, Mater. Sci. Eng. A., 1998, 244, 191–198. doi: 10.1016/S0921-5093(97)00553-4
- J. M. Byun, S. H. Hwang, S. Lee, M. J. Suk, S. T. Oh and Y. D. Kim: ‘Microstructure control of Mo–Si–B alloy for formation of continuous Mo phase’, Int. J. Refract. Met. Hard Mater., 2015, 53, 61–65. doi: 10.1016/j.ijrmhm.2015.03.006
- A. Khorsand Zak, W. H. Abd. Majid, M. E. Abrishami and R. Yousefi: ‘X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain ploy methods’, Solid State Sci., 2011, 13, 251–256. doi: 10.1016/j.solidstatesciences.2010.11.024
- Y. J. Lee, Y. I. Seo, S. H. Kim, D.-G. Kim, Y. D. Kim: ‘Optical properties of molybdenum oxide thin films deposited by chemical vapor transport of MoO3(OH)2’, J. Alloys Compd., 2014, 585, 418–422. doi: 10.1016/j.jallcom.2014.01.097
- Y. J. Lee, C. W. Park, D.-G. Kim, W. T. Nichols, S. T. Oh and Y. D. Kim: ‘MoO3 thin film synthesis by chemical vapor transport of volatile MoO3(OH)2’, J. Ceram. Process. Res., 2010, 11, 52–55.
- V. Loo, J. J. Frans, F. M. Smet, G. D. Rieck and G. Verspui: ‘Phase relations and diffusion paths in the Mo–Si–C system at 1200°C’, High Temp.-High Press., 1982, 14, 25–31.
- W. T. Sturges and R. M. Harrison: ‘Semi-quantitative x-ray diffraction analysis of size fractionated atmospheric particles’, Atmos. Environ., 1989, 23, 1083–1098. doi: 10.1016/0004-6981(89)90309-0
- W. Zhou, Y. Tang, R. Song, L. Jiang, K. S. Hui and K. N. Hui: ‘Characterization of electrical conductivity of porous metal fiber sintered sheet using four-point probe method’, Mater. Des., 2012, 37, 161–165. doi: 10.1016/j.matdes.2011.12.046
- M. Hakamada, T. Kuromura, Y. Chen, H. Kusuda and M. Mabuch: ‘Influence of porosity and pore size on electrical resistivity of porous aluminum produced by spacer method’, Mater. Trans., 2007, 48, 32–36. doi: 10.2320/matertrans.48.32
- P. S. Liu, T. F. Li and C. Fu: ‘Relationship between electrical resistivity and porosity for porous metals’, Mater. Sci. Eng. A, 1999, 268, 208–215. doi: 10.1016/S0921-5093(99)00073-8