References
- S. Iijima: ‘Helical microtubules of graphitic carbon’, Nature, 1991, 354, 56–58.
- S. R. Bakshi and A. Agarwal: ‘An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites’,Carbon, 2011, 49, 533–544.
- S. C. Tjong: ‘Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets.’ Mater. Sci. Eng. R, 2013, 74, 281–350. doi: 10.1016/j.mser.2013.08.001
- A. Esawi and K. Morsi: ‘Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets', Compos. Part A, 2007, 38, 646–650.
- A. M. K. Esawi, K. Morsi, A. Sayed, A. A. Gawad and P. borah: ‘Fabrication and properties of dispersed carbon nanotube–aluminum composites', Mater. Sci. Eng. A, 2009, 508, 167–173.
- A. M. K. Esawi, K. Morsi, A. Sayed, M. Taher and S. Lanka: ‘The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites', Compos. Part A, 2011, 42, 234–243.
- B. Chen, L. Jia, S. Li, H. Imai, M. Takahashi and K. Kondoh: ‘In situ synthesized Al4C3 nanorods with excellent strengthening effect in aluminum matrix composites', Adv. Eng. Mater., 2014, 16, (8), 972–975.
- B. Chen, S. Li, H. Imai, L. Jia, J. Umeda, M. Takahashi and K. Kondoh: ‘An approach for homogeneous carbon nanotube dispersion in Al matrix composites', Mater. Des., 2015, 72, 1–8.
- J. Liao and M. J. Tan: ‘Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use', Powd. Technol., 2011, 208, 42–48.
- H. J. Choi, J. H. Shin and D. H. Bae: ‘The effect of milling conditions on microstructures and mechanical properties of Al/MWCNT composites', Compos. Part A, 2012, 43, 1061–1072.
- Z. Y. Liu, S. J. Xu, B. L. Xiao, P. Xue, W. G. Wang and Z. Y. Ma: ‘Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites', Compos. Part A, 2012, 43, 2161–2168.
- S. W. Sang, T. Kim, Y. S. Kim, H. S. Choi, H. J. Lim, S. J. Yang, C. R. Park: ‘Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers', Carbon, 2012, 50, 3–33.
- B. Chen, H. Imai, S. Li, L. Jia, J. Umeda, and K. Kondoh: ‘Crack formation in powder metallurgy carbon nanotube (CNT)/Al composites during post heat-treatment', JOM, 2015, 67(12), 2887–2891.
- B. Chen, K. Kondoh, H. Imai, J. Umeda, M. Takahashi: ‘Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions', Scr. Mater., 2016, 113, 158–162.
- S. J. Yoo, S. H. Han and W. J. Kim: ‘Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes', Scr. Mater., 2013, 68, 711–714.
- R. Pérez-Bustamante, C. D. Gómez-Esparza, I. Estrada-Guel, M. Miki-Yoshida, L. Licea-Jiménez, S. A. Pérez-García and R. Martínez-Sánchez: ‘Microstructural and mechanical characterization of Al–MWCNT composites produced by mechanical milling', Mater. Sci. Eng. A, 2009, 502, 159–163.
- B. Chen, S. Li, H. Imai, L. Jia, J. Umeda, M. Takahashi, K. Kondoh: ‘Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests', Compos. Sci. Technol., 2015, 113, 1–8.