Strengthening behaviour and mechanisms of extruded powder metallurgy pure Ti materials reinforced with ubiquitous light elements

References

• J. C. Williams and E. A. Starke, Jr.: ‘Progress in structural materials for aerospace systems’, Acta Mater., 2003, 51, 5775–5799. doi: 10.1016/j.actamat.2003.08.023
   Web of Science ®Google Scholar
• E. Nakamura and K. Sato: ‘Managing the scarcity of chemical elements’, Nat. Mater., 2011, 10, 158–161. doi: 10.1038/nmat2969
   PubMed Web of Science ®Google Scholar
• M. Niinomi: ‘Creation of functionality by ubiquitous elements in titanium alloys’, J. Jpn. Inst. Met., 2011, 75, (1), 21–28. doi: 10.2320/jinstmet.75.21
   Web of Science ®Google Scholar
• H. Fujii, K. Fujisawa, M. Ishii and Y. Yamashita: ‘Development of low-cost high-strength Ti–Fe–O–N alloy series’, Nippon Steel Techn. Rep., 2002, 85, 107–112.
   Google Scholar
• H. Conrad: ‘Effect of interstitial solutes on the strength and ductility of titanium’, Prog. Mater. Sci., 1981, 26, 123–403. doi: 10.1016/0079-6425(81)90001-3
   Web of Science ®Google Scholar
• M. Qian: ‘Cold compaction and sintering of titanium and its alloys for near-net-shape or preform fabrication’, Int. J. Powder Metall., 2010, 46, (5), 29–44.
   Web of Science ®Google Scholar
• K. Okazaki and H. Conrad: ‘Effects of grain size and interstitial solute content on the hardness of Ti–N, Ti–O and Ti–C alloys at room temperature’, Trans. Japan Inst. Met., 1973, 14, 364–367. doi: 10.2320/matertrans1960.14.364
   Google Scholar
• M. Yan, W. Xu, M. S. Dargusch, H. P. Tang, M. Brandt and M. Qian: ‘Review of effect of oxygen on room temperature ductility of titanium and titanium alloys’, Powder Metall., 2014, 57, 251–257. doi: 10.1179/1743290114Y.0000000108
   Web of Science ®Google Scholar
• M. Yan, M. S. Dargusch, T. Ebel and M. Qian: ‘Transmission electron microscopy and 3D atom probe study of oxygen-induced fine microstructural features in as-sintered Ti–6Al–4V and their impacts on ductility’, Acta Mater., 2014, 68, 196–206. doi: 10.1016/j.actamat.2014.01.015
   Web of Science ®Google Scholar
• T. Mimoto, N. Nakanishi, J. Umeda and K. Kondoh: ‘Fabrication of powder metallurgy pure Ti material by using thermal decomposition of TiH2’, J. High Temp. Soc., 2011, 37, (6), 326–331. doi: 10.7791/jhts.37.326
   Google Scholar
• T. Mimoto, S. Li, J. Umeda and K. Kondoh: ‘Strengthening mechanisms of P/M extruded titanium materials with additive hydrogen’, J. Jpn. Soc. Powder Powder Metall., 2013, 60, (11), 467–474. doi: 10.2497/jjspm.60.467
   Google Scholar
• C. McCracken: ‘Production of fine titanium powders via the Hydride-Dehydride (HDH) process’, Powder Inject. Mould. Int., 2008, 2, (2), 1–3.
   Google Scholar
• B. Sun, S. Li, H. Imai, J. Umeda and K. Kondoh: ‘Oxygen solid solution strengthened pure titanium powder materials’, Trans. JWRI, 2012, 41, (1), 59–64.
   Google Scholar
• B. Sun, S. Li, H. Imai, T. Mimoto, J. Umeda and K. Kondoh: ‘Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods’, Mater. Sci. Eng. A, 2013, 563, 95–100. doi: 10.1016/j.msea.2012.11.058
   Web of Science ®Google Scholar
• T. Ando, T. Tsuchiyama and S. Takaki: ‘Effect of nitrogen on tensile deformation behavior and development of deformation structure in titanium’, J. Jpn. Inst. Met., 2008, 72, (12), 949–954. doi: 10.2320/jinstmet.72.949
   Web of Science ®Google Scholar
• R. Labusch: ‘A statistical theory of solid solution hardening’, Phys. Status Solidi B, 1970, 41, 659–669. doi: 10.1002/pssb.19700410221
   Google Scholar
• R. W. Cahn and P. Haasen: ‘Physical metallurgy fourth’, Revised and Enhanced edn, Vol. 3; 1996, Amsterdam, North-Holland.
   Google Scholar
• K. Kondoh, B. Sun, S. Li, H. Imai and J. Umeda: ‘Experimental and theoretical analysis of nitrogen solid-solution strengthening of PM titanium’, Int. J. Powder Metall., 2014, 50, (3), 35–40.
   Web of Science ®Google Scholar
• H. Fujii: ‘Performance improvement and expansion of application range in titanium and its alloys containing inexpensive common elements’, Bull. Iron Steel Inst. Jpn., 2010, 15, (11), 686–691.
   Google Scholar
• A. San-Martin and F. D. Manchester: ‘The H–Ti (Hydrogen–Titanium) system’, Bull. Alloy Phase Diagrams, 1987, 8, (1), 30–42. doi: 10.1007/BF02868888
   Google Scholar
• K. Wang, X. Kong, J. Du, C. Li, Z. Li and Z. Wu: ‘Thermodynamic description of the Ti–H system’, Comput. Coupling Phase Diagrams Thermochem., 2010, 34, 317–323. doi: 10.1016/j.calphad.2010.07.001
   Web of Science ®Google Scholar
• U. F. Kocks, C. N. Tomé and H.-R. Wenk: ‘Texture and anisotropy’; 2001, New York, Cambridge University Press.
   Google Scholar