Friction and wear behaviours of surface densified powder metallurgy Fe–2Cu–0.6C material

References

• G. B. Li, J. Chen and D. L. Guan: ‘Friction and wear behaviors of nanocrystalline surface layer of medium carbon steel’, Tribol. Int., 2010, 43, 2216–2221. doi: 10.1016/j.triboint.2010.07.004
   Web of Science ®Google Scholar
• A. Molinari, and G. Straffelini: ‘Tribological behaviour of steam-treated ferrous parts’, Met. Powder Rep., 1998, 53, 36–36.
   Google Scholar
• A. Molinari, B. Tesi, T. Bacci and T. Marcu: ‘Plasma nitriding and nitrocarburising of sintered Fe–Cr–Mo and Fe–Cr–Mo–C alloys’, Surf. Coat. Technol., 2001, 140, 251–255. doi: 10.1016/S0257-8972(01)01040-4
   Web of Science ®Google Scholar
• C. Amsallem, A. Gaucher and G. Guilhot: ‘The unlubricated frictional behavior of sintered iron’, Wear, 1973, 23, 97–112. doi: 10.1016/0043-1648(73)90045-8
   Web of Science ®Google Scholar
• S. B. Halesh and P. Dinesh: ‘Tribological behavior of sintered iron based ternary alloy under unduplicated and lubricated condition’, Int. J. Eng. Innov. Technol., 2014, 4, (1), 116–120.
   Google Scholar
• A. Molinari, G. Straffelini and P. Campestrini: ‘Influence of microstructure on impact and wear behaviour of sintered Cr and Mo steel’, Powder Metall., 1999, 42, (3), 235–241. doi: 10.1179/003258999665576
   Web of Science ®Google Scholar
• V. Denise: ‘Surface densification of PM materials’, Proc. Int. Conf. on ‘Powder Metallurgy & Particulate Materials’, Princeton, USA, May 2000, 3, 127–137.
   Google Scholar
• K. Narasimhan: ‘Powder metal gears up for a hard-nosed approach’, Met. Powder Rep., 2003, 6, 24–30.
   Google Scholar
• P. K. Jones, K. Buckley-Golder and D. Sarafinchan: ‘Developing PM gear tooth and bearing surfaces for high stress applications’, Int. J. Powder Metall., 1998, 34, (1), 26–33.
   Web of Science ®Google Scholar
• P. K. Jones, K. Buckley-Golder and R. Lawcock: ‘Densification strategies for high endurance P/M components’, Int. J. Powder Metall., 1997, 33, (3), 37–44.
   Web of Science ®Google Scholar
• L. S. Sigl, G. Rau and P. Delarbre: ‘Quantification of selective surface densification in P/M components’, Proc. Int. Conf. on ‘Powder Metallurgy and Particulate Materials’, Montreal, Canada, June, 2005, (6), 71–78.
   Google Scholar
• G. Rau and L. S. Sigl: ‘P/M gear for a passenger car gear box’, Proc. Int. Conf. on ‘Gears’, Munieh, Germany, September, 2005, 1, 181–196.
   Google Scholar
• L. Fordén, S. Bengtsson and K. Lipp: ‘Rolling contact fatigue design aspects of surface densified PM compacts’, Proc. ‘Euro Powder metallurgy Congress & Exhibition’, Valencia, Spain, October 2003, 03–16.
   Google Scholar
• W. Jandeska, G. Hoffmann and R. Slattery: ‘Rolling contact fatigue of surface densified FLN2-4405’, Int. J. Powder Metal., 2005, 41, (3), 49–56.
   Web of Science ®Google Scholar
• Y. Yu and L. Fordén: ‘Surface densification—an effective way to improve the performance of sintered gears’, Powder Metall. Technol., 2005, 23, (1), 62–74.
   Google Scholar
• T. Wang, D. P. Wang, G. Liu, B. Gong, and N. Song: ‘Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing’, Appl. Surf. Sci., 2008, 255, (5), 1824–1829. doi: 10.1016/j.apsusc.2008.06.034
   Web of Science ®Google Scholar
• S. Z. Wen and P. Huang: ‘Tribology principle’, Vol. 11, 282–319; 2003, Beijing, Tsinghua University Press.
   Google Scholar
• N. Hirose, J. Asami, A. Fujiki and K. Oouchi: ‘Poisson’s ratio of sintered materials for structural machine parts’, J. Jpn. Soc. Powder Powder Metall., 2004, 51, (7), 515–521. doi: 10.2497/jjspm.51.515
   Google Scholar
• J. A. Wang and H. Danninger: ‘Dry sliding wear behavior of molybdenum alloyed sintered steels’, Wear, 1998, 222, 49–56. doi: 10.1016/S0043-1648(98)00279-8
   Web of Science ®Google Scholar
• A. Flodin and L. Fordén: ‘Root and contact stress calculations in surface densified PM gears’, PM2004, in Vienna, Austria, 2 October 2004, 395–400.
   Google Scholar
• A. P. Boresi, and R. J. Schmidt: ‘Advanced mechanics of materials’, Vol. 17, 614–615; 2003, Hoboken, John Wiley & Sons.
   Google Scholar
• H. Abdoos, H. Khorsand and A. R. Shahani: ‘Fatigue behavior of diffusion bonded powder metallurgy steel with heterogeneous microstructure’, Mater. Design, 2009, 30, (4), 1026–1031. doi: 10.1016/j.matdes.2008.06.050
   Web of Science ®Google Scholar