Development and characterisation of a biosourced feedstock of superalloy in metal injection moulding process

References

• Enneti RK, Onbattuvelli VP, Atre SV. 4-Powder binder formulation and compound manufacture in metal injection molding (MIM). In: D. F. Heaney, editor. Handbook of metal injection molding. Cambridge: Woodhead Publishing; 2012. p. 64–92.
   Google Scholar
• Quinard C, Song J, Barriere T, et al. Elaboration of PIM feedstocks with 316L fine stainless steel powders for the processing of micro-components. Powder Technol. 2011;208:383–389. doi: 10.1016/j.powtec.2010.08.033
   Web of Science ®Google Scholar
• Tam KC, Yap SP, Foong ML, et al. Metal injection molding: effects of the vinyl acetate content on binder behavior. J Mater Process Technol. 1997;67:120–125. doi: 10.1016/S0924-0136(96)02830-0
   Web of Science ®Google Scholar
• Quinard C, Barriere T, Gelin JC. Development and property identification of 316L stainless steel feedstock for PIM and µPIM. Powder Technol. 2009;190:123–128. doi: 10.1016/j.powtec.2008.04.044
   Web of Science ®Google Scholar
• Özgün Ö, Özkan Gülsoy H, Yilmaz R, et al. Injection molding of nickel based 625 superalloy: sintering, heat treatment, microstructure and mechanical properties. J Alloys Comp. 2013;546:192–207. doi: 10.1016/j.jallcom.2012.08.069
   Web of Science ®Google Scholar
• Özgün Ö, Gülsoy HÖ, Yılmaz R, et al. Microstructural and mechanical characterization of injection molded 718 superalloy powders. J Alloys Comp. 2013;576:140–153. doi: 10.1016/j.jallcom.2013.04.042
   Web of Science ®Google Scholar
• Thomas S, Grohens Y, Jyotishkumar P. Characterization of polymer blends: miscibility, morphology and interfaces. New York (NY): John Wiley & Sons; 2014.
   Google Scholar
• Castillo RV, Müller AJ. Crystallization and morphology of biodegradable or biostable single and double crystalline block copolymers. Prog Polym Sci. 2009;34:516–560. doi: 10.1016/j.progpolymsci.2009.03.002
   Web of Science ®Google Scholar
• Sheth M, Kumar RA, Davé V, et al. Biodegradable polymer blends of poly(lactic acid) and poly(ethylene glycol). J Appl Polym Sci. 1997;66:1495–1505. doi: 10.1002/(SICI)1097-4628(19971121)66:8<1495::AID-APP10>3.0.CO;2-3
   Web of Science ®Google Scholar
• Thavanayagam G, Pickering KL, Swan JE, et al. Analysis of rheological behaviour of titanium feedstocks formulated with a water-soluble binder system for powder injection moulding. Powder Technol. 2015;269:227–232. doi: 10.1016/j.powtec.2014.09.020
   Web of Science ®Google Scholar
• Pillin I, Montrelay N, Grohens Y. Thermo-mechanical characterization of plasticized PLA: is the miscibility the only significant factor? Polymer. 2006;47:4676–4682. doi: 10.1016/j.polymer.2006.04.013
   Web of Science ®Google Scholar
• Lim L-T, Auras R, Rubino M. Processing technologies for poly(lactic acid). Prog Polym Sci. 2008;33:820–852. doi: 10.1016/j.progpolymsci.2008.05.004
   Web of Science ®Google Scholar
• Coleman MM, Serman CJ, Bhagwagar DE, et al. A practical guide to polymer miscibility. Polymer. 1990;31:1187–1203. doi: 10.1016/0032-3861(90)90208-G
   Web of Science ®Google Scholar
• Lai W-C, Liau W-B, Lin T-T. The effect of end groups of PEG on the crystallization behaviors of binary crystalline polymer blends PEG/PLLA. Polymer. 2004;45:3073–3080. doi: 10.1016/j.polymer.2004.03.003
   Web of Science ®Google Scholar
• Checot-Moinard D, Rigollet C, Lourdin P. Powder injection moulding PIM of feedstock based on hydrosoluble binder and submicronic powder to manufacture parts having micro-details. Powder Technol. 2011;208:472–479. doi: 10.1016/j.powtec.2010.08.045
   Web of Science ®Google Scholar
• Royer A, Barriere T, Gelin JC. The degradation of poly(ethylene glycol) in an Inconel 718 feedstock in the metal injection moulding process. Powder Technol. 2015;284:467–474. doi: 10.1016/j.powtec.2015.07.032
   Web of Science ®Google Scholar
• Zhou D, Shao J, Li G, et al. Crystallization behavior of PEG/PLLA block copolymers: effect of the different architectures and molecular weights. Polymer. 2015;62:70–76. doi: 10.1016/j.polymer.2015.02.019
   Web of Science ®Google Scholar
• Yang J, Liang Y, Luo J, et al. Multilength scale studies of the confined crystallization in poly(l-lactide)-block-poly(ethylene glycol) copolymer. Macromolecules. 2012;45:4254–4261. doi: 10.1021/ma202505f
   Web of Science ®Google Scholar