References
- Elomari S, Skibo MD, Sundarrajan A, et al. Thermal expansion behavior of particulate metal-matrix composites. Compos Sci Technol. 1998;58:369–376. doi: 10.1016/S0266-3538(97)00124-3
- Nurminen J, Näkki J, Vuoristo P. Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding. Int J Refract Met Hard Mater. 2009;27:472–478. doi: 10.1016/j.ijrmhm.2008.10.008
- Gopagoni S, Hwang JY, Singh ARP, et al. Microstructural evolution in laser deposited nickel–titanium–carbon in situ metal matrix composites. J Alloys Compd. 2011;509:1255–1260. doi: 10.1016/j.jallcom.2010.09.208
- Ye H, Liu XY, Hong H. Fabrication of metal matrix composites by metal injection molding – a review. J Mater Process Technol. 2008;200:12–24. doi: 10.1016/j.jmatprotec.2007.10.066
- German RM. Powder injection molding. Princeton (NJ): MPIF; 1990.
- Bose S. High temperature coatings. Boston: Elsevier Butterworth-Heinemann; 2007.
- Yaghtin AH, Salahinejad E, Khosravifard A, et al. Corrosive wear behavior of chromium carbide coatings deposited by air plasma spraying. Ceram Int. 2015;41:7916–7920. doi: 10.1016/j.ceramint.2015.02.131
- Liu ZY, Loh NH, Khor KA, et al. Mechanical alloying of TiC/M2 high speed steel composite powders and sintering investigation. Mater Sci Eng A. 2001;311:13–21. doi: 10.1016/S0921-5093(01)00929-7
- Herranz G, Rodríguez GP, Alonso R, et al. Sintering process of M2 HSS feedstock reinforced with carbides. PIM Int. 2010;4(2):60–65.
- Zhang H, Heaney D, German RM. Effect of carbide addition on sintering of M2 tool steel. Adv PM Part. MPIF, Princeton, NJ. 2001;4:166–179.
- Herranz G, Levenfeld B, Várez A, et al. Metal injection moulding (MIM) of M2 high speed steel using a polyethylene based binder. Mater Sci Forum. 2003;426-432:4361-4366. doi: 10.4028/www.scientific.net/MSF.426-432.4361
- Enneti RK, Onbattuvelli VP, Atre SV. Powder binder formulation and compound manufacture in metal injection molding (MIM). In Handbook of metal injection molding, Part I: Processing, Chapter 4. Woodhead Publishing Limited; 2012. p. 64–92.
- Herranz G. Control of carbon content in metal injection molding (MIM). In Handbook of metal injection molding. Part II: Quality issues, Chapter 12. Cambridge: Woodhead Publishing Limited; 2012. p. 265-304
- Herranz G, Romero A, de Castro V, et al. Processing of AISI M2 high speed steel reinforced with vanadium carbide by solar sintering. Mater Des. 2014;54:934–946. doi: 10.1016/j.matdes.2013.09.027
- Price WJC, Rebbeck MM, Wronski AS, et al. Effect of carbon additions on sintering to full density of BT1 grade HSS. Powder Metall. 1995;28(1):1–6. doi: 10.1179/pom.1985.28.1.1
- Giménez S, Iturriza I. Microstructural characterization of powder metallurgy M35MHV HSS as a function of the processing route. J Mater Process Technol. 2003;143–144:555–560. doi: 10.1016/S0924-0136(03)00359-5