EBSD study to analyse mechanisms of phase boundary and grain boundary development in WC-Co cemented carbides

References

• Jayaram V, Sinclair R, Rowcliffe DJ. Intergranular cracking in WC-6% Co: an application of the Von Mises criterion. Acta Metall. 1983;31:373–378. doi: 10.1016/0001-6160(83)90214-6
   Google Scholar
• Mingard KP, Jones HG, Gee MG, et al. In situ observation of crack growth in a WC-Co hardmetal and characterisation of crack growth morphologies by EBSD. Int J Refract Met Hard Mater. 2013;36:136–142. doi: 10.1016/j.ijrmhm.2012.08.006
   Web of Science ®Google Scholar
• Hagège S Nouet G, Delavignette P. Grain boundary analysis in TEM. IV. Coincidence and the associated defect structure in tungsten carbide. Phys Status Solidi (a). 1980;62:97–107. doi: 10.1002/pssa.2210620110
   Web of Science ®Google Scholar
• Vicens J, Laurent-Pinso E, Chermant JL, et al. Structural analysis and properties of grain boundaries in hexagonal carbides. J Phys Colloq. 1988;C5:271–276.
   Google Scholar
• Vicens J, Lay S, Benjdir M, et al. Nature of the boundary planes in tungsten carbide-cobalt composites. J Phys Colloq. 1990;C1:353–358.
   Google Scholar
• Christensen M, Wahnström G. Co-phase penetration of WC(1010)/WC(1010) grain boundaries from first principles. Phys Rev B-Condens Matter. 2003;67:115415, 1–11.
   Google Scholar
• Christensen M, Wahnström G. Effects of cobalt intergranular segregation on interface energetics in WC-Co. Acta Mater. 2004;52:2199–2207. doi: 10.1016/j.actamat.2004.01.013
   Web of Science ®Google Scholar
• Kim C.-S, Rohrer GS. Geometric and crystallographic characterization of WC surfaces and grain boundaries in WC-Co composites. Interface Sci. 2004;12:19–27. doi: 10.1023/B:INTS.0000012291.81411.dc
   Google Scholar
• Kim C.-S, Massa TR, Rohrer GS. Interface character distributions in WC-Co composites. J Am Ceram Soc. 2008;91:996–1001. doi: 10.1111/j.1551-2916.2007.02226.x
   Web of Science ®Google Scholar
• Kumar V, Fang Z, Wrigh S, et al. An analysis of grain boundaries and grain growth in cemented tungsten carbide using orientation imaging microscopy. Metall Mater Trans A. 2006;37:599–607. doi: 10.1007/s11661-006-0032-z
   Web of Science ®Google Scholar
• Kim S, Han S-H, Park J-K, et al. Variation of WC grain shape with carbon content in the WC-Co alloys during liquid-phase sintering. Scr Mater. 2003;48:635–639. doi: 10.1016/S1359-6462(02)00464-5
   Web of Science ®Google Scholar
• Delanoë A, Lay S. Evolution of the WC grain shape in WC-Co alloys during sintering: cumulated effect of the Cr addition and of the C content. Int J Refract Met Hard Mater. 2009;27:189–197. doi: 10.1016/j.ijrmhm.2008.07.010
   Web of Science ®Google Scholar
• Pellan M, Lay S, Missiaen JM, et al. Effect of binder composition on WC grain growth in cemented carbides. J Am Ceram Soc. 2015;98(11):3596–3601. doi: 10.1111/jace.13748
   Web of Science ®Google Scholar
• Pellan M. Development of grain boundaries and phase boundaries in WC-Co cemented carbides. Thesis, Université Grenoble Alpes; 2015.
   Google Scholar
• Haglund SA, Agren J. Solid state sintering of cemented carbides. In: German RM, Messing GL, Cornwall RG, editors. Sintering technology. New York: Marcel Dekker Inc.; 1995. p. 141–148.
   Google Scholar
• Kim JD, Kang SJL, Lee JW. Formation of grain boundaries in liquid-phase-sintered WC-Co alloys. J Am Ceram Soc. 2005;88(2):500–503. doi: 10.1111/j.1551-2916.2005.00091.x
   Web of Science ®Google Scholar
• Petisme MVG, Johansson SAE, Wahnström G. A computational study of interfaces in WC–Co cemented carbides. Modell Simul Mater Sci Eng. 2015;23:045001, 1–29.
   Google Scholar
• Henjered A, Hellsing M, Andren HO, et al. Quantitative microanalysis of carbide/carbide interfaces in WC-Co-base cemented carbides. Mater Sci Technol. 1986;2(8):847–855. doi: 10.1179/mst.1986.2.8.847
   Web of Science ®Google Scholar
• Weidow J, Andrén HO. Grain and phase boundary segregation in WC-Co with small V, Cr or Mn additions. Acta Mater. 2010;58(11):3888–3894. doi: 10.1016/j.actamat.2010.03.038
   Web of Science ®Google Scholar
• Weidow J, Andrén HO. Grain and phase boundary segregation in WC-Co with TiC, ZrC, NbC or TaC additions. Int J Refract Met Hard Mater. 2011;29(1):38–43. doi: 10.1016/j.ijrmhm.2010.06.010
   Web of Science ®Google Scholar
• Lay S, Missiaen JM. Microstructure and morphology of hard metals. In: Sarin VK, Mari D, Llanes L, editors. Comprehensive hard materialism. Elsevier; 2014. 1(3), 91–122.
   Google Scholar