http://orcid.org/0000-0003-0186-1139
References
- He G, Liu F, Si J, et al. Characterization of hot compression behavior of a new HIPed nickel-based P/M superalloy using processing maps. Mater Des. 2015;87:256–265. doi: 10.1016/j.matdes.2015.08.035
- ElRakayby H, Kim H, Hong S, et al. An investigation of densification behavior of nickel alloy powder during hot isostatic pressing. Adv Powder Technol. 2015;26:1314–1318. doi: 10.1016/j.apt.2015.07.005
- Ezugwu EO, Wang ZM, Machado AR. The machinability of nickel-based alloys: a review. J Mater Process Technol. 1998;86:1–16. doi: 10.1016/S0924-0136(98)00314-8
- Atkinson HV, Davies S. Fundamental aspects of hot isostatic pressing: an overview. Metall Mater Trans A. 2000;31:2981–3000. DOI:10.1007/s11661-000-0078-2.
- Abouaf M, Chenot JL, Raisson G, et al. Finite element simulation of hot isostatic pressing of metal powders. Int J Numer Methods Eng. 1988;25:191–212. doi: 10.1002/nme.1620250116
- Kuhn LT, McMeeking RM. Power-law creep of powder bonded by isolated contacts. Int J Mech Sci. 1992;34:563–573. DOI:10.1016/0020-7403(92)90031-B.
- Duva JM, Crow PD. The densification of powders by power-law creep during hot isostatic pressing. Acta Metall Mater. 1992;40:31–35. doi: 10.1016/0956-7151(92)90196-L
- ElRakayby H, Kim K. Effect of stacking fault energy on densification behavior of metal powder during hot isostatic pressing. Mater Des. 2016;99:433–438. DOI:10.1016/j.matdes.2016.03.057.
- Alniak MO, Bedir F. Change in grain size and flow strength in P/M Rene 95 under isothermal forging conditions. Mater Sci Eng B. 2006;130:254–263. DOI:10.1016/j.mseb.2006.03.011.
- Chang L, Sun W, Cui Y, et al. Effect of heat treatment on microstructure and mechanical properties of the hot-isostatic-pressed Inconel 718 powder compact. J Alloys Compd. 2014;590:227–232. doi: 10.1016/j.jallcom.2013.12.107
- Levasseur D, Brochu M. Effect of heating rate on the pressureless sintering densification of a nickel-based superalloy. Metall Mater Trans A. 2016;47:2257–2266. DOI:10.1007/s11661-016-3361-6.
- Essa K, Khan R, Hassanin H, et al. An iterative approach of hot isostatic pressing tooling design for net-shape IN718 superalloy parts. Int J Adv Manuf Technol. 2016;83(9–12):1835–1845. DOI:10.1007/s00170-015-7603-3.
- Jeon YC, Kim KT. Near-net-shape forming of 316L stainless steel powder under hot isostatic pressing. Int J Mech Sci. 1999;41:815–830. DOI:10.1016/S0020-7403(98)00053-8.
- Saunders N, Guo UKZ, Li X, et al. Using JMatPro to model materials properties and behavior. JOM. 2003;55:60–65. doi: 10.1007/s11837-003-0013-2
- Rémy L, Pineau A, Thomas B. Temperature dependence of stacking fault energy in close-packed metals and alloys. Mater Sci Eng. 1978;36:47–63. DOI:10.1016/0025-5416(78)90194-5.
- Zhi’an Y, Yaotian X, Changxu S. The role of cobalt in the high temperature creep of γ′-strengthened nickel-based superalloys. Mater Sci Eng A. 1988;101:65–73. DOI:10.1016/0921-5093(88)90051-2.
- Besson J, Abouaf M. Behaviour of cylindrical hip containers. Int J Solids Struct. 1991;28:691–702. DOI:10.1016/0020-7683(91)90150-E.
- Sanchez L, Ouedraogo E, Dellis C, et al. Influence of container on numerical simulation of hot isostatic pressing: final shape profile comparison. Powder Metall. 2004;47:253–260. doi: 10.1179/003258904225015608