References
- Yeh J-W, Chen S-K, Lin S-J, et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater. 2004;6(5):299–303. doi: 10.1002/adem.200300567
- Yeh JW, Chen YL, Lin SJ, et al. High-entropy alloys – a new era of exploitation. Mater Sci Forum. 2007;560:1–9. doi: 10.4028/www.scientific.net/MSF.560.1
- Tsai M-H, Yeh J-W. High-entropy alloys: a critical review. Mater Res Lett. 2014;2(3):107–123. doi: 10.1080/21663831.2014.912690
- Guo S, Liu CT. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase. Prog Nat Sci Mater Int. 2011; 21(6):433–446.
- Ye YF, Wang Q, Lu J, et al. High-entropy alloy: challenges and prospects. Mater Today. 2016; 19(6):349–362.
- Yeh J-W. Alloy design strategies and future trends in high-entropy alloys. JOM. 2013;65(12):1759–1771. doi: 10.1007/s11837-013-0761-6
- Tomilin IA, Kaloshkin SD. ‘High entropy alloys’ – ‘semi-impossible’ regular solid solutions? Mater Sci Technol. 2015;31(10):1231–1234. doi: 10.1179/1743284715Y.0000000028
- Zhang F, Zhang C, Chen SL, et al. An understanding of high entropy alloys from phase diagram calculations. Calphad. 2014;45:1–10. doi: 10.1016/j.calphad.2013.10.006
- Cantor B, Chang ITH, Knight P, et al. Microstructural development in equiatomic multicomponent alloys. Mater Sci Eng A. 2004;375–377:213–218. doi: 10.1016/j.msea.2003.10.257
- Otto F, Yang Y, Bei H, et al. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys. Acta Mater. 2013;61(7):2628–2638. doi: 10.1016/j.actamat.2013.01.042
- Yao MJ, Pradeep KG, Tasan CC, et al. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility. Scr Mater. 2014;72–73:5–8. doi: 10.1016/j.scriptamat.2013.09.030
- Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater. 2000;48(1):279–306. doi: 10.1016/S1359-6454(99)00300-6
- Guo S, Hu Q, Ng C, et al. More than entropy in high-entropy alloys: forming solid solutions or amorphous phase. Intermetallics. 2013;41:96–103. doi: 10.1016/j.intermet.2013.05.002
- Yang X, Zhang Y. Prediction of high-entropy stabilized solid-solution in multi-component alloys. Mater Chem Phys. 2012;132(2–3):233–238. doi: 10.1016/j.matchemphys.2011.11.021
- Zhang Y, Zuo TT, Tang Z, et al. Microstructures and properties of high-entropy alloys. Prog Mater Sci. 2014;61:1–93. doi: 10.1016/j.pmatsci.2013.10.001
- Tsai K-Y, Tsai M-H, Yeh J-W. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys. Acta Mater. 2013;61(13):4887–4897. doi: 10.1016/j.actamat.2013.04.058
- Murty BS, Yeh J-W, Ranganathan S. High-entropy alloys, 1st ed. Butterworth-Heinemann, 2010.
- Senkov ON, Wilks GB, Miracle DB, et al. Refractory high-entropy alloys. Intermetallics. 2010;18(9):1758–1765. doi: 10.1016/j.intermet.2010.05.014
- Jablonski PD, Licavoli JJ, Gao MC, et al. Manufacturing of high entropy alloys. JOM. 2015;67(10):2278–2287. doi: 10.1007/s11837-015-1540-3
- Salishchev GA, Tikhonovsky MA, Shaysultanov DG, et al. Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system. J Alloys Compd. 2014;591:11–21. doi: 10.1016/j.jallcom.2013.12.210
- Jones NG, Izzo R, Mignanelli PM, et al. Phase evolution in an Al0.5CrFeCoNiCu high entropy alloy. Intermetallics. 2016;71:43–50. doi: 10.1016/j.intermet.2015.12.001
- Bhattacharjee PP, Sathiaraj GD, Zaid M, et al. Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy. J Alloys Compd. 2014;587:544–552. doi: 10.1016/j.jallcom.2013.10.237
- Otto F, Hanold NL, George EP. Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries. Intermetallics. 2014;54:39–48. doi: 10.1016/j.intermet.2014.05.014
- Varalakshmi S, Kamaraj M, Murty BS. Formation and stability of equiatomic and nonequiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying. Metall Mater Trans A. 2010;41(10):2703–2709. doi: 10.1007/s11661-010-0344-x
- Varalakshmi S, Rao GA, Kamaraj M, et al. Hot consolidation and mechanical properties of nanocrystalline equiatomic AlFeTiCrZnCu high entropy alloy after mechanical alloying. J Mater Sci. 2010;45(19):5158–5163. doi: 10.1007/s10853-010-4246-5
- Koundinya NTBN, Sajith Babu C, Sivaprasad K, et al. Phase evolution and thermal analysis of nanocrystalline AlCrCuFeNiZn high entropy alloy produced by mechanical alloying. J Mater Eng Perform. 2013;22(10):3077–3084. doi: 10.1007/s11665-013-0580-5
- Praveen S, Anupam A, Sirasani T, et al. Characterization of oxide dispersed AlCoCrFe high entropy alloy synthesized by mechanical alloying and spark plasma sintering. Trans Indian Inst Met. 2013;66(4):369–373. doi: 10.1007/s12666-013-0268-4
- Ji W, Fu Z, Wang W, et al. Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy alloy. J Alloys Compd. 2014;589:61–66. doi: 10.1016/j.jallcom.2013.11.146
- Wang C, Ji W, Fu Z. Mechanical alloying and spark plasma sintering of CoCrFeNiMnAl high-entropy alloy. Adv Powder Technol. 2014;25(4):1334–1338. doi: 10.1016/j.apt.2014.03.014
- Chen Y-L, Hu Y-H, Tsai C-W, et al. Structural evolution during mechanical milling and subsequent annealing of Cu–Ni–Al–Co–Cr–Fe–Ti alloys. Mater Chem Phys. 2009;118(2–3):354–361. doi: 10.1016/j.matchemphys.2009.07.067
- Chen Y-L, Hu Y-H, Tsai C-W, et al. Alloying behavior of binary to octonary alloys based on Cu–Ni–Al–Co–Cr–Fe–Ti–Mo during mechanical alloying. J Alloys Compd. 2009;477(1–2):696–705. doi: 10.1016/j.jallcom.2008.10.111
- Fujieda T, Shiratori H, Kuwabara K, et al. First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials. Mater Lett. 2015;159:12–15. doi: 10.1016/j.matlet.2015.06.046
- Kunce I, Polanski M, Bystrzycki J. Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using laser engineered Net shaping (ENS). Int J Hydrog Energy. 2013;38(27):12180–12189. doi: 10.1016/j.ijhydene.2013.05.071
- Brif Y, Thomas M, Todd I. The use of high-entropy alloys in additive manufacturing. Scr Mater. 2015;99:93–96. doi: 10.1016/j.scriptamat.2014.11.037
- Chang S-Y, Chen M-K, Chen D-S. Multiprincipal-element AlCrTaTiZr-nitride nanocomposite film of extremely high thermal stability as diffusion barrier for Cu metallization. J Electrochem Soc. 2009;156(5):G37–G42. doi: 10.1149/1.3097186
- Huang P-K, Yeh J-W, Shun T-T, et al. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating. Adv Eng Mater. 2004;6(1–2):74–78. doi: 10.1002/adem.200300507
- Zhang H, Pan Y, He Y-Z. Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding. Mater Des. 2011;32(4):1910–1915. doi: 10.1016/j.matdes.2010.12.001
- Ren B, Liu ZX, Shi L, et al. Structure and properties of (AlCrMnMoNiZrB0.1)Nx coatings prepared by reactive DC sputtering. Appl Surf Sci. 2011;257(16):7172–7178. doi: 10.1016/j.apsusc.2011.03.083
- Yao C-Z, Zhang P, Liu M, et al. Electrochemical preparation and magnetic study of Bi–Fe–Co–Ni–Mn high entropy alloy. Electrochim Acta. 2008;53(28):8359–8365. doi: 10.1016/j.electacta.2008.06.036
- Chen S-T, Tang W-Y, Kuo Y-F, et al. Microstructure and properties of age-hardenable AlxCrFe1.5MnNi0.5 alloys. Mater Sci Eng A. 2010;527(21–22):5818–5825. doi: 10.1016/j.msea.2010.05.052
- Liu L, Zhu JB, Zhang C, et al. Microstructure and the properties of FeCoCuNiSnx high entropy alloys. Mater Sci Eng A. 2012;548:64–68. doi: 10.1016/j.msea.2012.03.080
- Yang X, Zhang Y, Liaw PK. Microstructure and compressive properties of NbTiVTaAlx high entropy alloys. Proc Eng. 2012;36:292–298. doi: 10.1016/j.proeng.2012.03.043
- Senkov ON, Woodward CF. Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy. Mater Sci Eng A. 2011;529:311–320. doi: 10.1016/j.msea.2011.09.033
- Wang XF, Zhang Y, Qiao Y, et al. Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys. Intermetallics. 2007;15(3):357–362. doi: 10.1016/j.intermet.2006.08.005
- Tong C-J, Chen Y-L, Yeh J-W, et al. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements. Metall Mater Trans A. 2005;36(4):881–893. doi: 10.1007/s11661-005-0283-0
- Lužnik J, Koželj P, Vrtnik S, et al. Complex magnetism of Ho-Dy-Y-Gd-Tb hexagonal high-entropy alloy. Phys Rev B. 2015;92(22):224201. doi: 10.1103/PhysRevB.92.224201
- Takeuchi A, Amiya K, Wada T, et al. Dual HCP structures formed in senary ScYLaTiZrHf multi-principal-element alloy. Intermetallics. 2016;69:103–109. doi: 10.1016/j.intermet.2015.10.022
- Wu J-M, Lin S-J, Yeh J-W, et al. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content. Wear. 2006;261(5–6):513–519. doi: 10.1016/j.wear.2005.12.008
- Ke G-Y, Chen G-Y, Hsu T, et al. Fcc and BCC equivalents in as-cast solid solutions of AlxCoyCrzCu0.5FevNiw high-entropy alloys. Ann Chim Sci Matér. 2006;31(6):669–684. doi: 10.3166/acsm.31.669-684
- Tung C-C, Yeh J-W, Shun T, et al. On the elemental effect of AlCoCrCuFeNi high-entropy alloy system. Mater Lett. 2007;61(1):1–5. doi: 10.1016/j.matlet.2006.03.140
- Wang F, Zhang Y, Chen G, et al. Tensile and compressive mechanical behavior of a CoCrCuFeNiAl0.5 high entropy alloy. Int J Mod Phys B. 2009;23:1254–1259. doi: 10.1142/S0217979209060774
- Singh S, Wanderka N, Murty BS, et al. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy. Acta Mater. 2011;59(1):182–190. doi: 10.1016/j.actamat.2010.09.023
- Sriharitha R, Murty BS, Kottada RS. Phase formation in mechanically alloyed AlxCoCrCuFeNi (x = 0.45, 1, 2.5, 5 mol) high entropy alloys. Intermetallics. 2013;32:119–126. doi: 10.1016/j.intermet.2012.08.015
- Park N, Watanabe I, Terada D, et al. Recrystallization behavior of CoCrCuFeNi high-entropy alloy. Metall Mater Trans A. 2015;46(4):1481–1487. doi: 10.1007/s11661-014-2594-5
- Qiu X-W, Liu C-G. Microstructure and properties of Al2CrFeCoCuTiNix high-entropy alloys prepared by laser cladding. J Alloys Compd. 2013;553:216–220. doi: 10.1016/j.jallcom.2012.11.100
- Borkar T, Gwalani B, Choudhuri D, et al. Hierarchical multi-scale microstructural evolution in an as-cast Al2CuCrFeNi2 complex concentrated alloy. Intermetallics. 2016;71:31–42. doi: 10.1016/j.intermet.2015.12.013
- Liu WH, Wu Y, He JY, et al. Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy. Scr Mater. 2013;68(7):526–529. doi: 10.1016/j.scriptamat.2012.12.002
- Pickering EJ, Muñoz-Moreno R, Stone HJ, et al. Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi. Scr Mater. 2016;113:106–109. doi: 10.1016/j.scriptamat.2015.10.025
- Holcomb GR, Tylczak J, Carney C. Oxidation of CoCrFeMnNi high entropy alloys. JOM. 2015;67(10):2326–2339. doi: 10.1007/s11837-015-1517-2
- He JY, Liu WH, Wang H, et al. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system. Acta Mater. 2014;62:105–113. doi: 10.1016/j.actamat.2013.09.037
- Zaddach AJ, Niu C, Koch CC, et al. Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy. JOM. 2013;65(12):1780–1789. doi: 10.1007/s11837-013-0771-4
- Ji W, Wang W, Wang H, et al. Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering. Intermetallics. 2015;56:24–27. doi: 10.1016/j.intermet.2014.08.008
- Stepanov ND, Shaysultanov DG, Salishchev GA, et al. Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys. J Alloys Compd. 2015;628:170–185. doi: 10.1016/j.jallcom.2014.12.157
- Laplanche G, Gadaud P, Horst O, et al. Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy. J Alloys Compd. 2015;623:348–353. doi: 10.1016/j.jallcom.2014.11.061
- Eißmann N, Kieback B. Influence of partial diffusion coefficients on sintering and segregation in multicomponent alloys [to be published].
- Shackelford JF, Alexander W. CRC materials science and engineering handbook, 3rd ed. Boca Raton (FL): CRC Press, 2000.
- Liu L, Zhu JB, Li L, et al. Microstructure and tensile properties of FeMnNiCuCoSnx high entropy alloys. Mater Des. 2013;44:223–227. doi: 10.1016/j.matdes.2012.08.019
- Gali A, George EP. Tensile properties of high- and medium-entropy alloys. Intermetallics. 2013;39:74–78. doi: 10.1016/j.intermet.2013.03.018
- Wu YD, Cai YH, Wang T, et al. A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties. Mater Lett. 2014;130:277–280. doi: 10.1016/j.matlet.2014.05.134
- Jiří Zýka MJ. Structure and mechanical properties of TaNbHfZrTi high entropy alloy. Metal; 2015; Brno, Czech Republic: EU; 2015.
- Liu WH, He JY, Huang HL, et al. Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys. Intermetallics. 2015;60:1–8. doi: 10.1016/j.intermet.2015.01.004
- Daoud HM, Manzoni AM, Wanderka N, et al. High-temperature tensile strength of Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy (high-entropy alloy). JOM. 2015;67:2271–2277. doi: 10.1007/s11837-015-1484-7
- Deng Y, Tasan CC, Pradeep KG, et al. Design of a twinning-induced plasticity high entropy alloy. Acta Mater. 2015;94:124–133. doi: 10.1016/j.actamat.2015.04.014
- Wang Z, Gao MC, Ma SG, et al. Effect of cold rolling on the microstructure and mechanical properties of Al0.25CoCrFe1.25Ni1.25 high-entropy alloy. Mater Sci Eng A. 2015;645:163–169. doi: 10.1016/j.msea.2015.07.088
- Liu Y, Wang J, Fang Q, et al. Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder. Intermetallics. 2016;68:16–22. doi: 10.1016/j.intermet.2015.08.012
- Adolf Edelhoff. Basiswerkstoffe/Technische Daten|Feindrahtwerk Adolf Edelhoff Datenblatt Cu [Online]. [cited 2016 Apr 28]. Available from: http://www.edelhoff-wire.de/de/datenblatt-cu.
- Amco. Mechanisch_-_physikalische_Eigenschaften_von_Alumnium_Platten [Online]. [cited 2016 Apr 28]. Available from: http://amco-metall.de/fileadmin/downloads/Mechanisch_-_physikalische_Eigenschaften_von_Alumnium_Platten.jpg.
- Brandenburgische Technische Universität Cottbus. Titan und Titanlegierungen [Online]. [cited 2016 Apr 28]. Available from: http://www-docs.tu-cottbus.de/metallkunde/public/files/Skripte/SS2012-LBW-Titan.pdf.
- C. Gleich GmbH. CERTAL® hochfeste Aluminium Walzplatte [Online]. [cited 2016 Apr 28]. Available from: http://gleich.de/de/produkte/aluminium-walzplatten/al-walzplatten---formenbau/certal?pdf.
- COMWORK. LOB: Werkstoff: 3.3535 [Online]. [cited 2016 Apr 28]. Available from: http://www.lob-gmbh.de/de/werkstoffe/3.3535.html.
- COMWORK. LOB: Werkstoff: 3.3547 [Online]. [cited 2016 Apr 28]. Available from: http://www.lob-gmbh.de/de/werkstoffe/3.3547.html.
- Deutsche Edelstahlwerke. Nichtrostender austenitischer Stahl 1.4404: X2CrNiMo17-12-2 [Online]. [cited 2016 Apr 28]. Available from: http://www.dew-stahl.com/fileadmin/files/dew-stahl.com/documents/Publikationen/Werkstoffdatenblaetter/RSH/1.4404_de.pdf.
- Deutsche Edelstahlwerke. Nichtrostender superaustenitischer Nickel- Chrom-Molybdän-Kupfer-Stahl: 1.4539 [Online]. [cited 2016 Apr 28]. Available from: http://www.dew-stahl.com/fileadmin/files/dew-stahl.com/documents/Publikationen/Werkstoffdatenblaetter/RSH/1.4539_de.pdf.
- Deutsche Edelstahlwerke. Unlegierter Vergütungsstahl 1.1191/1.1201: C45E/C45R [Online]. [cited 2016 Apr 28]. Available from: http://www.dew-stahl.com/fileadmin/files/dew-stahl.com/documents/Publikationen/Werkstoffdatenblaetter/Baustahl/1.1191_1.1201_de.pdf.
- High Tech Alloys. Hastelloy C-276 [Online]. [cited 2016 Apr 28]. Available from: http://www.hightechalloys.de/pdf/Hastelloy_C-276.pdf.
- Mertens. 1.0038 / St 37-2 / S 235 JR: Datenblatt [Online]. [cited 2016 Apr 28]. Available from: http://www.mertens-stahl.de/fileadmin/files/mertens-stahl.de/documents/Datenblaetter/Bau-_und_Qualitaetsstahl/1.0038_St37-2_S235JR__gewalzt.pdf.
- METALCOR. 2.4668 (Alloy 718), N07718 | Datenblatt | METALCOR [Online]. [cited 2016 Apr 28]. Available from: http://www.metalcor.de/datenblatt/105/.
- Otto Fuchs. Aluminiumlegierungen [Online]. [cited 2016 Apr 28]. Available from: http://www.otto-fuchs.com/fileadmin/user_upload/images/pdf/Fuchs_WI_Al_D_Scr.pdf.
- Senkov ON, Semiatin SL. Microstructure and properties of a refractory high-entropy alloy after cold working. J Alloys Compd. 2015;649:1110–1123. doi: 10.1016/j.jallcom.2015.07.209
- ThyssenKrupp. Titan Grade 5 [Online]. [cited 2016 Apr 28]. Available from: http://www.thyssenkrupp.ch/documents/Titan_Grade_5.pdf.
- ThyssenKrupp-Schulte. S235Jxx: Werkstoffdatenblatt [Online]. [cited 2016 Apr 28]. Available from: http://www.thyssenkrupp-schulte.de/tl_files/ThyssenKrupp/Infothek%20(Downloads)/Baustaehle/S235Jxx.pdf.
- WHS Sondermetalle. Tantal (Ta, TaW2.5, TaW10) [Online]. [cited 2016 Apr 28]. Available from: http://www.whs-sondermetalle.de/pdf/Tantal_web.pdf.
- Wilhelm Herm. Müller GmbH & Co.Kg. Werkstoffdatenblatt PC transparent [Online]. [cited 2016 Apr 28]. Available from: http://www.whm.net/content/de/download/res/14481-3.pdf.
- Wolfram Industrie, Tungsten Technology Germany. W und Mo: Daten und Technik [Online]. [cited 2016 Apr 28]. Available from: http://www.wolfram-industrie.de/downloads/Daten%20und%20Technik%20deutsch.pdf?PHPSESSID=20f22143ec72fe3afcef2d8c7cc440fe.