References
- Zhang Y, Yang X, Liaw PK. Alloy design and properties optimization of high-entropy alloys. JOM. 2012;64:830–838. doi:10.1007/s11837-012-0366-5.
- Gludovatz B, Hohenwarter A, Catoor D, et al. A fracture-resistant high-entropy alloy for cryogenic applications. Science. 2014;345:1153–1158. doi:10.1126/science.1254581.
- Senkov ON, Wilks GB, Miracle DB, et al. Refractory high-entropy alloys. Intermetallics. 2010;18:1758–1765. doi: 10.1016/j.intermet.2010.05.014
- Zhang Y, Zuo TT, Tang Z, et al. Microstructures and properties of high-entropy alloys. Prog Mater Sci. 2014;61:1–93. doi:10.1016/j.pmatsci.2013.10.001.
- Singh S, Wanderka N, Murty BS, et al. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy. Acta Mater. 2011;59:182–190. doi:10.1016/j.actamat.2010.09.023.
- Pradeep KG, Wanderka N, Choi P, et al. Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography. Acta Mater. 2013;61:4696–4706. doi:10.1016/j.actamat.2013.04.059.
- Varalakshmi S, Kamaraj M, Murty BS. Formation and stability of equiatomic and nonequiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying. Metall Mater Trans A. 2010;41:2703–2709. doi:10.1007/s11661-010-0344-x.
- Senkov ON, Woodward CF. Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy. Mater Sci Eng A. 2011;529:311–320. doi:10.1016/j.msea.2011.09.033.
- Ji W, Wang W, Wang H, et al. Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering. Intermetallics. 2015;56:24–27. doi:10.1016/j.intermet.2014.08.008.
- Joo S-H, Kato H, Jang MJ, et al. Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering. J Alloy Compd. 2017;698:591–604. doi:10.1016/j.jallcom.2016.12.010.
- Liu Y, Wang JS, Fang QH, et al. Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder. Intermetallics. 2016;68:16–22. doi:10.1016/j.intermet.2015.08.012.
- Hsu C-Y, Yeh J-W, Chen S-K, et al. Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition. Metall Mater Trans A. 2004;35:1465–1469. doi:10.1007/s11661-004-0254-x.
- Li WS, Zhan J, Wang SC, et al. Characterizations and mechanical properties of impregnated diamond segment using Cu-Fe-Co metal matrix. Rare Met. 2012;31:81–87. doi:10.1007/s12598-012-0467-x.
- Romański A. Factors affecting diamond retention in powder metallurgy diamond tools. Arch Metall Mater. 2010;55:1073–1081. doi:10.2478/v10172-010-0009-1.
- Liu B, Wang JS, Liu Y, et al. Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion. Intermetallics. 2016;75:25–30. doi:10.1016/j.intermet.2016.05.006.
- Tsai MH, Tsai KY, Tsai CW, et al. Criterion for sigma phase formation in Cr- and V-containing high-entropy alloys. Mater Res Lett. 2013;1:207–212. doi:10.1080/21663831.2013.831382.
- Middleburgh SC, King DM, Lumpkin GR, et al. Segregation and migration of species in the CrCoFeNi high entropy alloy. J Alloy Compd. 2014;599:179–182. doi:10.1016/j.jallcom.2014.01.135.
- Catalan AB, Mantese JV, Micheli AL, et al. Effects of sintering temperature and time on grain size and dielectric constant of potassium tantalum niobate films. J Am Ceram Soc. 1992;75:3007–3010. doi: 10.1111/j.1151-2916.1992.tb04379.x
- Ning XY. Study on preparation of oxide dispersion strengthened copper alloy and application in diamond tools [master thesis]. Beijing: General Research Institution for Nonferrous Metals; 2015.