Microstructural characterisation of CuAgZr powder particles produced by argon gas atomisation

References

• Bhat BN, Ellis DL, Smelyanskiy V, et al. Copper-Multiwall carbon nanotubes and copper-diamond composites for advanced rocket engines. 60th JANNAF Joint Subcommittee Meeting. 2013;1–25.
   Google Scholar
• He XC, Wang H, Liu HS, et al. Thermodynamic description of the Cu-Ag-Zr system. Calphad-computer Coupling of Phase Diagrams & Thermochemistry. 2006;30(4):367–374. doi: 10.1016/j.calphad.2006.09.001
   Web of Science ®Google Scholar
• Hedberg Y, Norell M, Hedberg J, et al. Surface characterisation of fine inert gas and water atomized stainless steel 316L powders: formation of thermodynamically unstable surface oxide phases. Powder Metall. 2013;56(2):158–163. doi: 10.1179/1743290112Y.0000000041
   Web of Science ®Google Scholar
• Juarez-Islas J, Zhou Y, Lavernia EJ. Spray atomization of two Al–Fe binary alloys: solidification and microstructure characterization. J Mater Sci. 1999;34(6):1211–1218. doi: 10.1023/A:1004509022619
   Web of Science ®Google Scholar
• Rahul BM, Rajkumar Y, Bharat BP. Sintering mechanism of CoCrFeMnNi high-entropy alloy powders. Powder Metall. doi:10.1080/00325899.2018.1433268.
   Web of Science ®Google Scholar
• Udo F. Spray simulation modeling and numerical simulation of spray forming metals. Cambridge: Cambridge University Press; 2004; p. 6–20.
   Google Scholar
• Pryds NH, Pedersen AS. Rapid solidification of martensitic stainless steel atomized droplets. Metall and Mater Transactions A. 2002;33(12):3755–3761. doi: 10.1007/s11661-002-0248-5
   Web of Science ®Google Scholar
• Dai Y, Yang M, Song C, et al. Solidification structure of C 2.08 Cr 25.43 Si 1.19 Mn 0.43 Fe 70.87, powders fabricated by high pressure gas atomization. Mater Charact. 2010;61(1):116–122. doi: 10.1016/j.matchar.2009.11.001
   Web of Science ®Google Scholar
• Yang M, Dai Y, Song C, et al. Microstructure evolution of grey cast iron powder by high pressure gas atomization. J Mater Process Technol. 2010;210(2):351–355. doi: 10.1016/j.jmatprotec.2009.09.023
   Web of Science ®Google Scholar
• Bittner F, Yin S, Kauffmann A, et al. Dynamic recrystallisation and precipitation behaviour of high strength and highly conducting Cu-Ag-Zr-alloys. Mater Sci Eng A. 2014;597(5):139–147. doi: 10.1016/j.msea.2013.12.051
   Web of Science ®Google Scholar
• Hanqi H. Principle of metal solidification. Beijing: China Machine Press; 2000; p. 148–50..
   Google Scholar
• He J, Zhao JZ, Wang XF, et al. Microstructure development in finely atomized droplets of copper-iron alloys. Metall and Mater Transactions A. 2005;36(9):2449–2454. doi: 10.1007/s11661-005-0118-z
   Web of Science ®Google Scholar
• Wright RN, Flinn JE, Korth GE, et al. The microstructure and phase relationships in rapidly solidified type 304 stainless steel powders. Metall and Materials Transactions A. 1988;19(10):2399–2405. doi: 10.1007/BF02645467
   Web of Science ®Google Scholar
• Uslan I, Saritas S, Davies TJ. Effects of variables on size and characteristics of gas atomised aluminium powders. Powder Metall. 2013;42(2):157–163. doi: 10.1179/003258999665512
   Web of Science ®Google Scholar
• García Escorial A, Lieblich M, López Valero M, et al. Microstructural characterization of gas atomized Fe73.5Si13.5B9Nb3Cu1 and Fe97Si3 alloys. J Alloy Compd. 2011;509S:S239–S242. doi: 10.1016/j.jallcom.2010.12.019
   Web of Science ®Google Scholar
• Si C, Tang X, Zhang X, et al. Characteristics of 7055Al alloy powders manufactured by gas-solid two-phase atomization: A comparison with gas atomization process. Mater Des. 2017;118:66–74. doi: 10.1016/j.matdes.2017.01.028
   Web of Science ®Google Scholar
• Xie L, Peng C, Wang R, et al. Influences of cooling rate on microstructures and morphologies of Non-equilibrium Al-27% Si alloy powders by Gas atomization. Rare Met Mater Eng. 2015;44:1006–1011.
   Web of Science ®Google Scholar
• Zhao XM, Xu J, Zhu XX, et al. Effect of atomization gas pressure variation on gas flow field in supersonic gas atomization. Sci China Ser E: Technol Sci. 2009;52(10):3046–3053. doi: 10.1007/s11431-009-0158-5
   Google Scholar
• Lu LL, Zhang SM, Xu J, et al. Solidification characterization of K418 alloy powders fabricated by argon Gas atomization. Mater Sci Forum. 2016;849:788–793. doi: 10.4028/www.scientific.net/MSF.849.788
   Google Scholar
• Zhao XM, Xu J, Zhu XX, et al. Characterization of 17-4PH stainless steel powders produced by supersonic gas atomization. Int J Min Metall Mater. 2012;19(1):83–88. doi: 10.1007/s12613-012-0519-0
   Web of Science ®Google Scholar
• Yan T, Yu EL, Zhao YQ. Constitutive modeling for flow stress of 55SiMnMo bainite steel at hot working conditions. Mater Des. 2013;50:574–580. doi: 10.1016/j.matdes.2013.03.082
   Web of Science ®Google Scholar