References
- Sakaguchi Y, Saida T, Kuri S, et al. Development of basket material for transportable storage cask for spent nuclear fuel; 2002 [cited 2006 Dec 2006]. Available from: https://www.mhi-global.com/company/technology/review/pdf/e391/e391011.pdf.
- Asghar Z, Zahid GH, Rafi-ud-Din, et al. Effect of degassing parameters on sinterability of Al/B 4 C powder mixture. Powder Metall. 2015;58:36–40. doi: 10.1179/1743290114Y.0000000097
- Han Y-M, Chen X-G. Electrochemical behavior of Al-B4C metal matrix composites in NaCl solution. Materials. 2015;8:6455–6470. doi: 10.3390/ma8095314
- Ervina Efzan MN, Siti Syazwani N, Al Bakri Abdullah MM. Fabrication method of aluminum matrix composite (AMCs): a review. Key Eng Mater. 2016;700:102–110. doi: 10.4028/www.scientific.net/KEM.700.102
- Pyzik AJ, Aksay LA, Snowden WE, et al. Processing of boron carbide-aluminum composites. J Amer Ceramic Soc. 1989;72:775–780. doi: 10.1111/j.1151-2916.1989.tb06216.x
- Vedani M, Casati R. Metal matrix composites reinforced by nano-particles – a review. Metals. 2014;4:65–83. doi: 10.3390/met4010065
- Sharma P, Chauhan G, Sharma N. Production of AMC by stir casting – an overview. Int J Contemp Pract. 2013;2:23–46.
- Ghasali E, Alizadeh M, Ebadzadeh T, et al. Investigation on microstructural and mechanical properties of B4C–aluminum matrix composites prepared by microwave sintering. J Mater Res Technol. 2015;4:411–415. doi: 10.1016/j.jmrt.2015.02.005
- Niranjan HB, Satyanarayana KG, Manjunatha B. Effect of mechanical and thermal loading on boron carbide particles reinforced Al-6061 alloy. Mater Sci Eng A. 2015;632:147–155. doi: 10.1016/j.msea.2015.02.007
- Abdullah Y, Yusof MR, Muhammad A, et al. Al/B4C composites with 5 and 10 wt% reinforcement content, prepared by powder metallurgy. J Nucl Related Technol. 2012;9:42–47.
- Dinaharan I. Influence of ceramic particulate type on microstructure and tensile strength of aluminum matrix composites produced using friction stir processing. J Asian Ceramic Soc. 2016;4:209–218. doi: 10.1016/j.jascer.2016.04.002
- Li P, Wu R, Lin J. A review of study on the deformation and damage in particle reinforced metal-matrix composites. ASM 1993 Materials Congress – Materials Week ‘93; Pittsburgh, Pennsylvania; 17 October–21 October 1993.
- Chawla N, Ayyar A. Three-dimensional (3D) microstructure-based modeling of crack growth in particle reinforced composites. J Mater Sci. 2007;42:9125–9129. doi: 10.1007/s10853-007-2010-2
- Woźniak J, Kostecki M, Broniszewski K, et al. Influence of mixing parameters on homogeneity of Al/Sic composites/Wpływ Parametrów Mieszania Na Jednorodność Kompozytów Al/Sic. Arch Metall Mater. 2014;59:1493–1498. doi: 10.2478/amm-2014-0254
- Karnezis PA, Durrant G, Cantor B. Characterization of reinforcement distribution in cast Al-alloy/SiCp composites. Mater Charact. 1998;40:97–109. doi: 10.1016/S1044-5803(97)00106-X
- Smith L, Wang RC, Nelson X, et al. Quantification of particulate mixing in nanocomposites. Conference on Electrical Insulation and Dielectric Phenomena, Quebec; 2008.
- Kim D, Lee JS, Barry CM, et al. Microscopic measurement of the degree of mixing for nanoparticles in polymer nanocomposites by TEM images. Microsc Res Tech. 2007;70:539–546. doi: 10.1002/jemt.20478
- Raeymaekers B, Haslam MD. A composite index to quantify dispersion of carbon nanotubes in polymer-based composite materials. Composites Part B Eng. 2013;55:16–21. doi: 10.1016/j.compositesb.2013.05.038
- Abenojar J, Velasco F, Martínez MA. Optimization of processing parameters for the Al + 10% B4C system obtained by mechanical alloying. J Mater Process Technol. 2007;184:441–446. doi: 10.1016/j.jmatprotec.2006.11.122
- Zhou J, Duszczyk J. Liquid phase sintering of an AA2014-based composite prepared from an elemental powder mixture. J Mater Sci. 1999;34:545–550. doi: 10.1023/A:1004594628862
- Sasaki G, Hirose T, Lee OY, et al. Design, manufacturing and applications of composites. Tenth Joint Canada-Japan Workshop on Composites, Vancouver, Canada, August; 2014.
- Gajewska M, Dutkiewicz J, Morgiel J. Effect of reinforcement particle size on microstructure and mechanical properties of AlZnMgCu/AlN nano-composites produced using mechanical alloying. J Alloys Compd. 2012;586:423–427. doi: 10.1016/j.jallcom.2012.10.055