References
- Bolzoni L, Ruiz-Navas EM, Gordo E. Quantifying the properties of low-cost powder metallurgy titanium alloys. Mater Sci Eng A. 2017;687:47–53. doi: 10.1016/j.msea.2017.01.049
- Leyens C, Peters M. Titanium and titanium alloys: fundamentals and applications. Weinheim: John Wiley & Sons; 2003. p. 231–244.
- Licausi MP, Muñoz AI, Borrás VA, et al. Tribocorrosion mechanisms of Ti6Al4V in artificial saliva by zero-resistance ammetry (ZRA) technique. J Bio- and Tribo-Corrosion. 2015;1(1):1–11. doi: 10.1007/s40735-015-0008-x
- Textor M, Freese HL, Volas MG, et al. Titanium and its alloys in biomedical engineering. Encycl Mater: Sci Technol. 2001;10:9374–9381.
- Cao F, Kumar P, Koopman M, et al. Understanding competing fatigue mechanisms in powder metallurgy Ti-6Al-4V alloy: role of crack initiation and duality of fatigue response. Mater Sci Eng A. 2015;630:139–145. doi: 10.1016/j.msea.2015.02.028
- Özyürek D, Tekeli S. Wear properties of titanium and Ti6Al4V alloy by mechanical milling. High Temp Mater Proc. 2011;30(1–2):175–180. doi: 10.1515/htmp.2011.026
- Ureña J, Gordo E, Ruiz-Navas E, et al. Electrochemical comparative study on corrosion behavior of conventional and powder metallurgy titanium alloys in physiological conditions. Met Powder Rep. 2017;72(2):118–123. doi: 10.1016/j.mprp.2016.04.003
- Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci. 2001;46(1–2):1–184. doi: 10.1016/S0079-6425(99)00010-9
- Welsch G, Boyer R, Collings E, editors. Materials properties handbook: titanium alloys. ASM International; 1993.
- Koike M, Cai Z, Fujii H, et al. Corrosion behavior of cast titanium with reduced surface reaction layer made by a face-coating method. Biomaterials. 2003;24(25):4541–4549. doi: 10.1016/S0142-9612(03)00063-2
- Lautenschlager EP, Monaghan P. Titanium and titanium alloys as dental materials. Int Dent J. 1993;43(3):245–253.
- Hsu RWW, Yang CC, Huang CA, et al. Electrochemical corrosion properties of Ti-6Al-4V implant alloy in the biological environment. Mater Sci Eng A. 2004;380(1):100–109. doi: 10.1016/j.msea.2004.03.069
- Olvera S, Sánchez-Marcos J, Palomares FJ, et al. Characterization and corrosion behaviour of CoNi alloys obtained by mechanical alloying. Mater Charact. 2014;93:79–86. doi: 10.1016/j.matchar.2014.03.022
- Zhang YH, Han XY, Li BW, et al. Effects of substituting Mg with Zr on the electrochemical characteristics of Mg2 Ni-type electrode alloys prepared by mechanical alloying. Mater Charact. 2008;59(4):390–396. doi: 10.1016/j.matchar.2007.02.003
- Simsek I, Ozyurek D. An investigation of the effect of high-energy milling time of Ti6Al4V biomaterial on the wear performance in the simulated body fluid environment. Powder Metall. 2017;60(5):384–392. doi: 10.1080/00325899.2017.1335956
- Cordero ZC, Knight BE, Schuh CA. Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals. Int Mater Rev. 2016;61(8):495–512. doi: 10.1080/09506608.2016.1191808
- Berthome G, Malki B, Baroux B. Pitting transients analysis of stainless steels at the open circuit potential. Corros Sci. 2006;48(9):2432–2441. doi: 10.1016/j.corsci.2005.09.012
- Galvele JR. Tafel’s law in pitting corrosion and crevice corrosion susceptibility. Corros Sci. 2005;47(12):3053–3067. doi: 10.1016/j.corsci.2005.05.043
- Gollapudi S. Grain size distribution effects on the corrosion behaviour of materials. Corros Sci. 2012;62:90–94. doi: 10.1016/j.corsci.2012.04.040
- Choubey A, Basu B, Balasubramaniam R. Electrochemical behavior of Ti-based alloys in simulated human body fluid environment. Trends Biomater Artif Organs. 2005;18(2):64–72.
- Siqueira RP, Sandim HRZ, Hayama AOF, et al. Microstructural evolution during sintering of the blended elemental Ti-5Al-2.5 Fe alloy. J Alloys Compd. 2009;476(1):130–137. doi: 10.1016/j.jallcom.2008.09.004
- Mareci D, Lucero V, Mirza J. Effect of replacement of vanadium by iron on the electrochemical; behaviour of titanium alloys in simulated physiological media. Rev Metal Madrid. 2009;45(1):32–41. doi: 10.3989/revmetalm.0750
- Bardal E. Corrosion and protection. London: Springer Science & Business Media; 2004. p. 122–135.
- Vasilescu E, Drob P, Raducanu D, et al. Effect of thermo-mechanical processing on the corrosion resistance of Ti6Al4V alloys in biofluids. Corros Sci. 2009;51(12):2885–2896. doi: 10.1016/j.corsci.2009.08.014