References
- Ortner HM, Stadermann FJ. Degradation of space exposed surfaces by hypervelocity dust bombardment, and refractory materials for space. Int J Refract Met Hard Mater. 2009;27(6):949–956. doi: 10.1016/j.ijrmhm.2009.05.009
- Bischof M, Mayer S, Leitner H, et al. On the development of grain growth resistant tantalum alloys. Int J Refract Met Hard Mater. 2006;24(6):437–444. doi: 10.1016/j.ijrmhm.2005.08.001
- Butyagin PA, Barsova LI, Mazhirina GS, et al. Development and testing of conical tantalum spinnerets. Fibre Chem. 1997;29(4):253–256. doi: 10.1007/BF02430723
- Kock W, Paschen P. Tantalum-processing, and applications. Jom. 1989;41(10):33–39. doi: 10.1007/BF03220360
- Cardonne SM, Kumar P, Michaluk CA, et al. Tantalum and its alloys. Int J Refract Met Hard Mater. 1995;13(4):187–194. doi: 10.1016/0263-4368(95)94023-R
- Sandim HRZ, Padilha AF, Randle V, et al. Grain subdivision and recrystallization in oligocrystalline tantalum during cold swaging and subsequent annealing. Int J Refract Met Hard Mater. 1999;17(6):431–435. doi: 10.1016/S0263-4368(99)00035-9
- Green WV. High-temperature creep of tantalum. Trans Met Soc. 1965; AIME 233.
- Schwartzberg F, Ogden H, Jaffee R.. Ductile-brittle transition in the refractory metals. 1959. DMIC Report 114.
- Koo RC. Grain-size effects on the deformation of tantalum at low temperatures. J Less-Common Met. 1962;4(2):138–144. doi: 10.1016/0022-5088(62)90012-7
- Knezevic M, Beyerlein IJ, Lovato ML, et al. A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum-tungsten alloys. Int J Plast. 2014;62:93–104. doi: 10.1016/j.ijplas.2014.07.007
- Zhang M, Li YN, Zhang FC, et al. Effect of annealing treatment on the microstructure and mechanical properties of a duplex Zr-2.5Nb alloy. Mater Sci Eng A. 2017;706(May):236–241. doi: 10.1016/j.msea.2017.08.107
- Zhao FX, Xu XC, Liu HQ, et al. Effect of annealing treatment on the microstructure and mechanical properties of ultrafine-grained aluminum. Mater Des. 2014;53:262–268. doi: 10.1016/j.matdes.2013.06.075
- Richards DW, Kramer MP, House JW, et al. Annealing studies of pure and alloyed tantalum employing rocking curves. Adv X-ray Anal. 2003;46:285–290.
- Hupalo MF, Sandim HRZ. The annealing behavior of oligocrystalline tantalum deformed by cold swaging. Mater Sci Eng A. 2001;318(1-2):216–223. doi: 10.1016/S0921-5093(01)01323-5
- Flater PJ, House JW, Afb E, et al. High strain-rate properties of tantalum processed by equal channel angular pressing. AIP Conf Proc. 955(1):517–520.
- Bechtold JH. Tensile properties of annealed tantalum at low temperatures. Acta Metall. 1955;3(3):249–254. doi: 10.1016/0001-6160(55)90060-2
- Bischof M, Mayer S, Leitner H, et al. Microstructure and mechanical properties of Si and Y doped tantalum. In: 16th International Plansee Seminar.; 2005:489–503.
- Zhang YS, Zhang XM, Bai XF, et al. Effect of thermal annealing on microstructure and mechanical properties of a gradient structured tantalum prepared by plasma activated sintering. Int J Refract Met Hard Mater. 2012;30(1):1–5. doi: 10.1016/j.ijrmhm.2011.04.004
- Arsenault RJ, Lawley A. Work hardening and dislocation structure in Ta and Ta-base alloys. Philos Mag. 1967;15(135):549–565. doi: 10.1080/14786436708220902
- Mathaudhu SN, Ted Hartwig K. Grain refinement and recrystallization of heavily worked tantalum. Mater Sci Eng A. 2006;426(1–2):128–142. doi: 10.1016/j.msea.2006.03.089
- Lee B, Vecchio KS, Ahzi S, et al. Modeling the mechanical behavior of materials. Metall Mater Trans A. 1997;28(1):113–122. doi: 10.1007/s11661-997-0087-5
- Sandim HRZ, Siciliano F. Recrystallization behaviour of the electron beam refined alloy Ta-10%W. Int J Refract Met Hard Mater. 1996;14(4):257–262. doi: 10.1016/0263-4368(95)00049-6
- Wang S, Chen C, Jia YL, et al. Effects of grain size on the microstructure and texture of cold-rolled Ta-2.5W alloy. Int J Refract Met Hard Mater. 2016;58:125–136. doi: 10.1016/j.ijrmhm.2016.04.018
- Lassila DH, Goldberg A, Becker R. The effect of grain boundaries on the athermal stress of tantalum and tantalum-tungsten alloys. Metall Mater Trans A Phys Metall Mater Sci. 2002;33(11):3457–3464. doi: 10.1007/s11661-002-0333-9
- Raabe D, Schlenkert G, Weisshaupt H, et al. Texture and microstructure of rolled and annealed tantalum. Mater Sci Technol. 1994;10(4):299–305. doi: 10.1179/mst.1994.10.4.299
- Sandim HRZ, Martins JP, Pinto AL, et al. Recrystallization of oligocrystalline tantalum deformed by cold rolling. Mater Sci Eng A. 2005;392(1-2):209–221. doi: 10.1016/j.msea.2004.09.032
- Clark JB, Garrett RK, Jungling TL, et al. Influence of initial ingot breakdown on the microstructural and textural development of high-purity tantalum. Metall Trans A. 1991;22(12):2959–2968. doi: 10.1007/BF02650255
- Humphreys FJ, Hatherly M. Recrystallization and related annealing phenomena. 2nd ed. Oxford, UK: Elsevier; 2004.
- Cao F, Cerreta EK, Trujillo CP, et al. Dynamic tensile extrusion response of tantalum. Acta Mater. 2008;56(19):5804–5817. doi: 10.1016/j.actamat.2008.07.054
- Efe M, Kim HJ, Chandrasekar S, et al. The chemical state and control of oxygen in powder metallurgy tantalum. Mater Sci Eng A. 2012;544:1–9. doi: 10.1016/j.msea.2012.01.100
- Hörz G. Precipitation processes in supersaturated tantalum-oxygen solid solutions hardness changes-precipitates. Acta Metall. 1979;27(12):1893–1906. doi: 10.1016/0001-6160(79)90080-4
- Stecura S. Observation of oxide particles below the apparent oxygen solubility limit in tantalum. Metall Trans. 1974;5(6):1337–1340. doi: 10.1007/BF02646617
- Vaughan DA, Stewart OM, CMS. Determination of interstitial solid-solubility limit in tantalum and identification of the precipitate phases. Trans Metall Soc AIME. 1961;221(5):937–946.
- Hall EO. The deformation and ageing of mild steel III discussion of results. Proc Phys Soc Sect B. 1951;64(9):747. doi: 10.1088/0370-1301/64/9/303
- Petch NJ. The cleavage strength of polycrystals. J Iron Steel Inst. 1953;174:25–28.
- Briant CL, Lassila DH. The effect of tungsten on the mechanical properties of tantalum. J Eng Mater Technol. 1999;121(2):172–177. doi: 10.1115/1.2812363
- Lassila DH, LeBlanc MM, Meyers MA. Effects of shock prestrain on the mechanical behavior of tantalum and tantalum-tungsten alloys. Proc. 15th TMS annu. Mtg., Anaheim. 1996. p. 185–190.
- Hines JA, Vecchio KS, Pe MT. Microstructural evolution in adiabatic shear bands in Ta and Ta–W alloys. Acta Mater. 2001;49:2905–2917. doi: 10.1016/S1359-6454(01)00215-4
- Nemat-Nasser S, Kapoor R. Deformation behavior of tantalum and a tantalum tungsten alloy. Int J Plast. 2001;17(10):1351–1366. doi: 10.1016/S0749-6419(00)00088-7
- Kapoor R, Nemat-Nasser S. Comparison between high and low strain-rate deformation of tantalum. Metall Mater Trans A. 2000;31(13):815–823. doi: 10.1007/s11661-000-1001-6
- Rajendran AM, Garrett RK, Clark JB, et al. Effects of strain rate on plastic flow and fracture in pure tantalum. J Mater Shap Technol. 1991;9(1):7–20. doi: 10.1007/BF02833628
- Khan AS, Liang R. Behaviors of three BCC metal over a wide range of strain rates and temperatures: Experiments and modeling. Int J Plast. 1999;15(10):1089–1109. doi: 10.1016/S0749-6419(99)00030-3
- Yoo SH, Sudarshan TS, Sethuram K, et al. Consolidation and high strain rate mechanical behavior of nanocrystalline tantalum powder. Nanostructured Mater. 1999;12(1):23–28. doi: 10.1016/S0965-9773(99)00059-8
- Hoge KG, Mukherjee AK. The temperature and strain rate dependence of the flow stress of tantalum. J Mater Sci. 1977;12(8):1666–1672. doi: 10.1007/BF00542818
- Meyers MA, Chen YJ, Marquis FDS, et al. High-strain, high-strain-rate behavior of tantalum. Metall Mater Trans A. 1995;26(10):2493–2501. doi: 10.1007/BF02669407