References
- Dube RK. Metal strip via roll compaction and related powder metallurgy routes. Int Mater Rev. 1990;35:253–292. doi: 10.1179/095066090790323993
- Fang ZZ, Paramore JD, Sun P, et al. Powder metallurgy of titanium - past, present, and future. Int Mater Rev. 2018;63:407–459. doi: 10.1080/09506608.2017.1366003
- Froes FH (Sam). A historical perspective of titanium powder metallurgy. In: Qian M, Froes FH (Sam), editor. Titan. powder Metall. Boston: Elsevier; 2015. p. 1–19.
- Cantin GMD, Gibson MA. Titanium sheet fabrication from powder. In: Qian M, Froes FH (Sam), editor. Titan. powder Metall. Boston: Elsevier; 2015. p. 383–403.
- Duz VA, Moxson VS. The direct powder rolling process for producing titanium and titanium alloy foils, sheets and plates. Mater Sci Technol. 2005;163:45–53.
- Moxson V, Senkov ON, Froes FH. Innovations in titanium powder processing. JOM. 2000;52:24–26. doi: 10.1007/s11837-000-0027-y
- Yamamoto Y, Kiggans JO, Clark MB, et al. Consolidation process in near net shape manufacturing of armstrong CP-Ti/Ti-6Al-4V powders. Key Eng Mater. 2010;436:103–111. doi: 10.4028/www.scientific.net/KEM.436.103
- Peter WH, Blue CA, Scorey CR, et al. Non-melt processing of “low-cost”, Armstrong titanium and titanium alloy powders. Proc. light Met. Technol. Conf. 2007. 2007.
- Stone N, Cantin D, Gibson M, et al. Implementing the direct powder route for titanium mill product: continuous production of CP sheet. Mater Sci Forum. 2009;618–619:139–142. doi: 10.4028/www.scientific.net/MSF.618-619.139
- Hong J-K, Lee C-H, Kim J-H, et al. Ti strip properties fabricated by powder rolling method. Surf Rev Lett. 2010;17:229–234. doi: 10.1142/S0218625X1001393X
- Park NK, Lee CH, Kim JH, et al. Characteristics of powder-rolled and sintered sheets made from HDH Ti powders. Key Eng Mater. 2012;520:281–288. doi: 10.4028/www.scientific.net/KEM.520.281
- Peter WH, Muth T, Chen W, et al. Titanium sheet fabricated from powder for industrial applications. JOM. 2012;64:566–571. doi: 10.1007/s11837-012-0309-1
- Chikosha S, Shabalala TC, Chikwanda HK. Effect of particle morphology and size on roll compaction of Ti-based powders. Powder Technol. 2014;264:310–319. doi: 10.1016/j.powtec.2014.05.033
- Evans PE, Smith GC. The compaction of metal powders by rolling. II An Examination of the Compaction Process. Powder Metall. 1959;2:26–44. doi: 10.1179/pom.1959.2.3.002
- Weaver CH, Butters RG, Lund JA. Hot rolling behaviour of iron powder preforms. Int J Powder Metall. 1972;8:3–15.