References
- Cheruvathur S, Lass EA, Campbell CE. Additive manufacturing of 17-4 PH stainless steel: post-processing heat treatment to achieve uniform reproducible microstructure. JOM. 2016;68:930–942. doi: 10.1007/s11837-015-1754-4
- Loh GH, Pei E, Harrison D, et al. An overview of functionally graded additive manufacturing. Addit Manuf. 2018;23:34–44. doi: 10.1016/j.addma.2018.06.023
- Li J, Deng D, Hou X, et al. Microstructure and performance optimization of stainless steel formed by laser additive manufacturing. Mater Sci Technol. 2016;32:1223–1230. doi: 10.1080/02670836.2015.1114774
- Sun SH, Ishimoto T, Hagihara K, et al. Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting. Scripta Mater. 2019;159:89–93. doi: 10.1016/j.scriptamat.2018.09.017
- Manca DR, Churyumov AY, Pozdniakov AV, et al. Novel heat-resistant Al-Si-Ni-Fe alloy manufactured by selective laser melting. Mater Lett. 2019;236:676–679. doi: 10.1016/j.matlet.2018.11.033
- Tao P, Li HX, Huang BY, et al. The crystal growth, intercellular spacing and microsegregation of selective laser melted Inconel 718 superalloy. Vacuum. 2019;159:382–390. doi: 10.1016/j.vacuum.2018.10.074
- Zhuo LC, Wang ZY, Zhang HJ, et al. Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy. Mater Lett. 2019;234:196–200. doi: 10.1016/j.matlet.2018.09.109
- Chen HY, Gu DD, Dai DH, et al. A novel approach to direct preparation of complete lath martensite microstructure in tool steel by selective laser me. Mater Lett. 2018;227:128–131. doi: 10.1016/j.matlet.2018.05.042
- Kong DC, Ni XQ, Dong CF, et al. Anisotropy in the microstructure and mechanical property for the bulk and porous 316L stainless steel fabricated via selective laser melting. Mater Letter. 2019;235:1–5. doi: 10.1016/j.matlet.2018.09.152
- Chang SH, Chen SH, Huang KT. Effects of vacuum sintering, HIP and HP treatments on the microstructure, mechanical and electrical properties of Cr70Cu30 alloys. Mater Trans. 2013;54:1857–1862. doi: 10.2320/matertrans.M2013173
- Chang SH, Chen JC, Huang KT, et al. Improvement of mechanical and electrical properties on the sintered Ni50mass% Cr alloys by HIP treatment. Mater Trans. 2013;54:1034–1039. doi: 10.2320/matertrans.M2013018
- Chang SH, Lee SC, Huang KT. Influences of γ″ and δ precipitations on the microstructural properties of 718 alloy through HIP, solid-solution, and different aging heat treatments. Mater Trans. 2010;51:1683–1688. doi: 10.2320/matertrans.M2010138
- Chang SH, Chen CC. Microstructure and mechanical properties of cobalt-based alloys strengthened with tantalum carbide powder via vacuum sintering and HIP treatments. Mater Trans. 2014;55:1623–1629. doi: 10.2320/matertrans.M2014044
- Chang SH, Chen CC. The effects of HIP, solution heat treatment and aging treatments on the microstructure and mechanical properties of sintering cobalt-based alloys strengthened with tantalum carbide additives. Mater Trans. 2014;55:1755–1761. doi: 10.2320/matertrans.M2014066
- Uddeholm AM Corrax®. https://www.uddeholm.com/app/uploads/sites/36/2017/08/AM-Corrax-english_1705_e1.pdf.
- Gussev MN, Sridharan N, Thompson Z, et al. Influence of hot isostatic pressing on the performance of aluminum alloy fabricated by ultrasonic additive manufacturing. Scripta Mater. 2018;145:33–36. doi: 10.1016/j.scriptamat.2017.10.004
- Irrinki H, Jangam JSP, Pasebani S, et al. Effects of particle characteristics on the microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser-powder bed fusion. Powder Technol. 2018;331:192–203. doi: 10.1016/j.powtec.2018.03.025
- Irrinki H, Nath SD, Alhofors M, et al. Microstructures, properties, and applications of laser sintered17-4PH stainless steel. J Am Ceram Soc. 2019;102:5679–5690. doi: 10.1111/jace.16372
- Irrinki H, Harper T, Badwe S, et al. Effects of powder characteristics and processing conditions on the corrosion performance of 17-4 PH stainless steel fabricated by laser-powder bed fusion. Prog Addit Manuf. 2018;3:39–49. doi: 10.1007/s40964-018-0048-0