References
- Maconachie T, Leary M, Lozanovski B, et al. SLM lattice structures: properties, performance, applications and challenges. Mater Des. 2019;183:108137.
- Yue HY, Chen YY, Wang XP, et al. Effect of beam current on microstructure, phase, grain characteristic and mechanical properties of Ti-47Al-2Cr-2Nb alloy fabricated by selective electron beam melting. J Alloy Compd. 2018;750:617–625.
- Zheng LJ, Liu YY, Sun SB, et al. Selective laser melting of Al–8.5Fe–1.3V–1.7Si alloy: investigation on the resultant microstructure and hardness. Chinese J Aeronaut. 2015;28:564–569.
- Tucho WM, Lysne VH, Austbø H, et al. Investigation of effects of process parameters on microstructure and hardness of slm manufactured ss316L. J Alloy Compd. 2018;740:910–925.
- Vilaro T, Colin C, Bartout JD, et al. Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy. Mater Sci Eng A. 2012;534:446–451.
- Yap CY, Chua CK, Dong ZL, et al. Review of selective laser melting: materials and applications. Appl Phys Rev. 2015;2:18–187.
- Hu Z, Zhu H, Zhang H, et al. Experimental investigation on selective laser melting of 17–4PH stainless steel. Opt Laser Technol. 2015;87:17–25.
- Sander J, Hufenbach J, Bleckmann M, et al. Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties. J Mater Sci. 2017;52:4944–4956.
- Hatami S, Lyckfeldt O, Tönnäng L, et al. Flow properties of tool steel powders for selective laser melting–influence of thermal and mechanical powder treatments. Powder Metall. 2017;60:353–362.
- Wei MW, Chen SY, Xi LY, et al. Selective laser melting of 24CrNiMo steel for brake disc: Fabrication efficiency, microstructure evolution, and properties. Opt Laser Technol. 2018;107:99–109.
- Buchbinder D, Schleifenbaum H, Heidrich S, et al. High power selective laser melting (HP SLM) of aluminium parts. Phys Procedia. 2011;12:271–278.
- Thijs L, Kempen K, Kruth JP, et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Mater. 2013;61:1809–1819.
- Ma M, Wang Z, Gao M. Layer thickness dependence of performance in high-power selective laser melting of 1Cr18Ni9Ti stainless steel. J Mater Process Technol. 2015;215:142–150.
- Brenne F, Taube A, Pröbstle M, et al. Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting. Prog Addit Manuf. 2016;1:141–151.
- Shi CF, Chen SY, Xia Q, et al. Preparation and printability of 24CrNiMo alloy steel powder for selective laser melting fabricating brake disc. Powder Metall. 2018;61:73–80.
- Zuo PF, Chen SY, Wei MW, et al. Microstructure evolution of 24CrNiMoY alloy steel parts by high power selective laser melting. J Manuf Process. 2019;44:28–37.
- Chang SH, Liu YM, Huang KT, et al. Effects of mechanical properties on precipitation hardening stainless steel by selective laser melting, hot isostatic pressing, solid-solution and aging treatments. Powder Metall. 2020;63:19–26.
- Yan JJ, Song H, Dong YP, et al. High strength (similar to 2000MPa) or highly ductile (similar to 11%) additively manufactured H13 by tempering at different conditions. Mater Sci Eng A. 2020;773:138845.
- Deirmina F, Peghini N, AlMangour B, et al. Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing. Mater Sci Eng A. 2019;753:109–121.
- Xu W, Brandt M, Sun S, et al. Additive manufacturing of strong and ductile Ti–6Al–4 V by selective laser melting via in situ martensite decomposition. Acta Mater. 2015;85:74–84.
- Xu F, Wen K, Tan Y. Microstructures and mechanical properties of low carbon fishplate materials. Acta Metall Sin. 2010;23:176–184.
- Liu QS, Zhao X, Zhang X, et al. Effect of cooling temperature field on formation of self-like bainite in high carbon silicon steel. Mater Sci Eng A. 2018;720:176–179.
- Saeidi K, Gao X, Zhong Y, et al. Hardened austenite steel with columnar sub-grain structure formed by laser melting. Mater Sci Eng A. 2015;625:221–229.
- Xi LY, Chen SY, Wei WM, et al. Microstructural evolution and properties of 24CrNiMoY alloy steel fabricated by selective laser melting. J Mater Eng Perform. 2019;28:5521–5532.
- Berretta S, Wang Y, Davies R, et al. Polymer viscosity, particle coalescence and mechanical performance in high-temperature laser sintering. J Mater Sci. 2016;51:4778–4794.
- Yan JJ, Zheng DL, Li HX, et al. Selective laser melting of H13: microstructure and residual stress. J Mater Sci. 2017;52:12476–12485.