References
- Lindskog P. The history of Distaloy. Powder Metall. 2013;56(5):351–361.
- Unami S, Ozaki Y, Ushirosako T, et al. Development of molybdenum hybrid-alloyed steel powder for high fatigue strength sintered parts. J Jap Soc J Powder Powder Metall. 2010;57(5):341–347.
- Dlapka M, Danninger H, Gierl C, et al. Defining the pores in PM components. Met Powder Rep. 2010;65(2):30–33. doi:10.1016/S0026-0657(10)70093-X.
- Sekiguchi S, Ono K, Fujiwara J, et al. New microstructure design for commercially pure titanium with outstanding mechanical properties by mechanical milling and hot roll sintering. Mater Trans. 2010;51(1):39–45. doi:10.2320/matertrans.MB200913.
- Tahir AM, Amberg G, Hedström P, et al. Cu redistribution during sintering of Fe–2Cu and Fe–2Cu–0·5C compacts. Powder Metall. 2014;57(5):373–379.
- Bocksteigel G. Erscheinungsbild und ursachen von volumenanderungen beim sintern von presslingen aus eisen-kupfer- und eisen-kupfer-graphit-pulvermischungen [Appearance and causes of changes in volume when sintering compacts from iron-copper and iron-copper-graphite powder mixtures]. Stahl Eisen. 1959;79(8):1187–1201.
- Durdaller D. Technical bulletin from Höanäs Corporation, 174D(1971) 471.
- Findeisen G. Einige mit Kupfer und Nickel Legierte Sinterstaehle: Inre eigenschaten und herstellung [Some sintered steels alloyed with copper and nickel: their properties and manufacture]. Metall. 1960;14:295–298.
- Jamil S-J, Chadwick G-A. Investigation and analysis of liquid phase sintering of Fe–Cu and Fe–Cu–C compacts. Powder Metall. 1958;28(2):65–71.
- Krantz T. Effect of density and composition on the dimensional stability and strength of iron-copper alloys. Int J Powder Metall. 1969;5(3):35–43.
- Lawcock R-L, Davies T-J. Effect of carbon on dimensional and microstructural characteristics of Fe–Cu compacts during sintering. Powder Metall. 1990;33(2):147–150.
- Angers R, Trudel Y. Modern development in powder metallurgy. Vol. 6. Applications and processes. Princeton (NJ): Metal Powder Industries Federation; 1974.
- Danninger H. Sintering of Mo alloyed P/M steels prepared from elemental powders. II: Mo homogenization and dimensional behaviour. Powder Metall Int. 1992;24(3):163–168.
- Danninger H, Kara T. Influence of manufacturing parameters on the sintering of Mo alloyed structural steels. Powder Metall Int. 1988;20(12):9–13.
- Fischmeister H-F, Larsson L-E. Fast diffusion alloying for powder forging using a liquid phase. Powder Metall. 1974;17(33):227–240.
- Dogan B, Davies T-J. Controlled rolled low alloy powder forged steels. Powder Metall. 1985;28(4):225–230.
- Phani K-K, Niyogi S-K. Young’s modulus of porous materials. J Mater Sci. 1987;22(1):257–263.
- Wang JC. Young’s modulus of porous materials. II: Young’s modulus of porous alumina with changing pore structure. J Mater Sci. 1984;19(3):809–814.
- Hasselman D-P-H. Relation between effects of porosity on strength and on Young’s modulus of elasticity of polycrystalline materials. Amer Cer Soc. 1962;46(11):564–565. doi:10.1111/j.1151-2916.1963.tb14615.x.
- Miura H, Sakamoto A, Tokunaga Y. Effect of porosity and pore shape on the Young’s moduli of sintered iron and steel. J Jap Soc J Powder Powder Metall. 1980;27(3):82–87.
- Chen L, Zhang Z, Haung Y, et al. Thermodynamic description of the Fe–Cu–C system. Calphad. 2019;64:225–235.
- Rothmoan S-J, Peterson N-L, Walter C-M, et al. The diffusion of copper in iron. J Appl Phys. 1968;39:5041–5044.
- Ilia E, Plamondon P, Masse J-P, et al. Copper precipitation at engine operating temperatures in powder-forged connecting rods manufactured with Fe–Cu–C alloys. Mater Sci Eng A. 2019;767(8):138383–138391.
- Othen P-J, Jenkins M-L, Smith G-D-W. High-resolution electron microscopy studies of the structure of Cu precipitates in α-Fe. Philos Mag. 1994;70A:1–24.
- Heo Y-U, Kim Y-K, Kim J-S, et al. Phase transformation of Cu precipitates from bcc to fcc in Fe–3Si–2Cu alloy. Acta Mater. 2013;61:519–528.