Advanced search
Publication Cover
Powder Metallurgy Volume 64, 2021 - Issue 2
Journal homepage
263
Views
8
CrossRef citations to date
0
Altmetric
ISNNM-2020

Fabrication of W–Y2O3–La2O3 composite by chemical process and spark plasma sintering

Eui Seon Leea Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul, Republic of KoreaView further author information
,
Gyuhwi Leea Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul, Republic of KoreaView further author information
,
Young-In Leea Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul, Republic of KoreaView further author information
,
Young-Keun Jeongb Graduate School of Convergence Science, Pusan National University, Busan, Republic of KoreaView further author information
&
Sung-Tag Oha Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul, Republic of KoreaCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0000-0003-4556-4291View further author information
ORCID Icon
Pages 108-114 | Received 14 Dec 2020, Accepted 26 Jan 2021, Published online: 05 Feb 2021

References

  • Lassner E, Schubert WD. Tungsten: properties, chemistry, technology of the elements, alloys, and chemical compounds. New York (NY): Kluwer Academic/Plenum Publishers; 1999.
  • Klopp WD. A review of chromium molybdenum, and tungsten alloys. J Less-Common Met. 1975;42(3):261–278.
  • Smid I, Akiba M, Vieider G, et al. Development of tungsten armor and bonding to copper for plasma-interactive components. J Nucl Mater. 1998;258–263:160–172.
  • Wesemann I, Spielmann W, Heel P, et al. Fracture strength and microstructure of ODS tungsten alloys. Int J Refract Met Hard Mat. 2010;28(6):687–691.
  • Wang H, Fang ZZ, Hwang KS, et al. Sinter-ability of nanocrystalline tungsten powder. Int J Refract Met Hard Mat. 2010;28(2):312–316.
  • Ren C, Fang ZZ, Koopman M, et al. Methods for improving ductility of tungsten – a review. Int J Refract Met Hard Mat. 2018;75:170–183.
  • Kim Y, Lee KH, Kim EP, et al. Fabrication of high temperature oxides dispersion strengthened tungsten composites by spark plasma sintering process. Int J Refract Met Hard Mat. 2009;27(5):842–846.
  • Rieth M, Dafferner B. Limitations of W and W–1%La2O3 for use as structural materials. J Nucl Mater. 2005;342(1–3):20–25.
  • Veleva L, Oksiuta Z, Vogt U, et al. Sintering and characterization of W-Y and W-Y2O3 materials. Fusion Eng Des. 2009;84(7):1920–1924.
  • Dong Z, Liu N, Ma Z, et al. Preparation of ultra-fine grain W- Y2O3 alloy by an improved wet chemical method and two-step spark plasma sintering. J Alloy Compd. 2017;695:2969–2973.
  • Liu G, Zhang GJ, Jiang F, et al. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility. Nat Mater. 2013;12(4):344–350.
  • Li J, Cheng J, Wei B, et al. Microstructure and properties of La2O3 doped W composites prepared by a wet chemical process. Int J Refract Met Hard Mat. 2017;66:226–233.
  • Tsai SC, Song YL, Tsai CS, et al. Ultrasonic spray pyrolysis for nanoparticles synthesis. J Mater Sci. 2004;39(11):3647–3657.
  • Gürmen S, Stopić S, Friedrich B. Synthesis of nanosized spherical cobalt powder by ultrasonic spray pyrolysis. Mater. Res. Bull. 2006;41(10):1882–1890.
  • Gurmen S, Ebin B, Stopić S, et al. Nanocrystalline spherical iron–nickel (Fe–Ni) alloy particles prepared by ultrasonic spray pyrolysis and hydrogen reduction (USP-HR). J Alloy Compd. 2009;480(2):529–533.
  • Choi WJ, Kim JH, Lee H, et al. Hydrogen reduction behavior of W/Y2O3 powder synthesized by ultrasonic spray pyrolysis. Int J Refract Met Hard Mat. 2021;95:105450.
  • Nguyen MH, Lee SJ, Kriven WM. Synthesis of oxide powders by way of a polymeric steric entrapment precursor route. J Mater Res. 1999;14(8):3417–3426.
  • Wilken TR, Morcom WR, Wert CA, et al. Reduction of tungsten oxide to tungsten metal. Metall Trans B. 1976;7(4):589–597.
  • Vesel A, Mozetič M, Panjana P, et al. Etching of carbon–tungsten composite with oxygen plasma. Surf Coat Technol. 2010;204(9–10):1503–1508.
  • Zhao M, Zhou Z, Zhong M, et al. Effect of hot rolling on the microstructure and fracture behavior of a bulk fine-grained W–Y2O3 alloy. Mater Sci Eng A. 2015;646:19–24.
  • Chen Z, Qin M, Yang J, et al. Effect of La2O3 addition on the synthesis of tungsten nanopowder via combustion-based method. J Mater Sci Technol. 2020;58:24–33.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.