Manganese – a promising element also in high alloy sintered steels

References

• Metals Handbook. Vol.1. properties and selection: irons, steels, and high-performance alloys. 10th ed., ASM, Metals Park (OH); 1990; p.140.
   Google Scholar
• Krauss G. Steels – processing, structure, and performance. Materials Park (OH): ASM; 2005.
   Google Scholar
• Grässel O, Frommeyer G, Derder C, et al. Phase transformations and mechanical properties of Fe-Mn-Si-Al TRIP-steels. J Phys IV Colloq. 1997;7:383–388.
   Google Scholar
• Konieczny AA. On the formability of automotive TRIP Steels. Vol. 78, Proceedings 2003 SAE World Congress. 2003. SAE International.
   Google Scholar
• Frommeyer G, Brüx U, Neumann P. Supra-ductile and high-strength manganese TRIP/TWIP steels for high energy absorption purposes. ISIJ Int. 2003;43:438–446.
   Web of Science ®Google Scholar
• Hadfield RA. Hadfield’s manganese steel. Science. 1888;12:284–286.
   Google Scholar
• Dastur YN, Leslie WC. Mechanism of work hardening in Hadfield manganese steel. Metall Trans. 1981;12A:749–759.
   Web of Science ®Google Scholar
• Adler PH, Olson GB, Owen WS. Strain hardening of Hadfield manganese steel. Metall Mater Trans. 1986;17A:1725–1737.
   Web of Science ®Google Scholar
• Ueji R, Tsuchida N, Terada D, et al. Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure. Scripta Mat. 2008;59:963–966.
   Web of Science ®Google Scholar
• Šalak A, Selecka M. Manganese in powder metallurgy steels. Cambridge: Springer-CISP; 2012.
   Google Scholar
• Šalak A. Sintered manganese steels part I: effect of structure of initial iron powders upon mechanical properties. Powder Metall Int. 1980;12:28–31.
   Web of Science ®Google Scholar
• Šalak A. Sintered manganese steels part II: manganese evaporation during sintering. Powder Metall Int. 1980;12:72–75.
   Web of Science ®Google Scholar
• Šalak A. Sublimation and condensation of manganese vapor. Pract. Metallogr. 1985;22(1):26–33.
   Google Scholar
• Šalak A. Manganese vapour-protection of premixed manganese steels against oxidation during sintering. Powder Metall Int. 1986;18:266–270.
   Web of Science ®Google Scholar
• Šalak A. Activated alloying of Fe-Mn powder systems by manganese vapour during sintering. Sci Sintering. 1989;21(3):145.
   Google Scholar
• Šalak A, Selecka M, Bures R. Manganese in ferrous powder metallurgy. Powder Metall Progress. 2001;1:41–58.
   Google Scholar
• Glassner AR. The thermochemical properties of the oxides, chlorides, and fluorides to 2500°K. U.S. Atomic Energy Comm. Rep. ANL-5750, Washington (DC); 1957.
   Google Scholar
• Lindskog P. The history of Distaloy. Powder Metall. 2013;56:351–361.
   Web of Science ®Google Scholar
• Donaldson I, Marucci M, Lindsley B. Adv. Powder Metall. & Partic. Mater. – 2011, compiled by IE Anderson, TW Pelletiers, MPIF, Princeton (NJ); 2011; Part 7, 54–63.
   Google Scholar
• Danninger H. Low alloy Chromium steels for highly loaded PM parts. Proc. Int. PM Conf. CSFR, Piestany; 1992; Vol.1, 81–90.
   Google Scholar
• Karasuno I, Koshiro K, Umino M, et al. Some properties of oil atomized low alloy steel powders containing chromium. Horizons of Powder Metallurgy (Proc, PM'86 Düsseldorf), WA Kaysser, WJ Huppmann eds., Verlag Schmid, Freiburg; 1986; Vol.1, p. 53–56.
   Google Scholar
• Unami S, Ogura K, Uenosono S. Effect of V on the strength of sintered Cr-Mo alloyed steel powder compacts. Proc. PM*98 World Congress, Granada; 1998; Vol.3, 173–178.
   Google Scholar
• Lindqvist B. Chromium alloyed steels – a new powder generation. Proc. Euro PM 2001 Nice, EPMA ed., Shrewsbury; 2001; Vol.1, p.13–21.
   Google Scholar
• Berg S, Maroli B. Properties obtained by chromium-containing material. In: V Arnhold, C-L Chu, WF Jandeska, HI Sanderow, editor. Advanced powder Metallurgy & Particulate Materials – 2002 part 8. Princeton (NJ): MPIF; 2002. p. 1–14.
   Google Scholar
• Tengzelius J, Grek SE, Blände CA. Limitations and possibilities in the utilization of Cr and Mn as alloying elements in high strength sintered steels. Mod Dev Powder Metall. 1981;13:159–182.
   Google Scholar
• Motooka N, Kuroishi N, Hara A, et al. Strength and ductility of Mn-Cr sintered steels. Met Powder Rep. 1983;38:629–631.
   Google Scholar
• Selecka M, Šalak A. Industrially sintered hybrid low carbon 3Cr-0.5Mo-xMn steels. Int J Powder Metall. 2010;46:29–42.
   Web of Science ®Google Scholar
• Simkulet Y, Selecka M. Effect of manganese on fracture of premix and hybrid Fe-0.85Mo-xMn-0.3C sintered steel. Powder Metall Progress. 2006;6:156–163.
   Google Scholar
• Burow J, Menz R, Lindsley B, et al. Neue manganhaltige PM-Stähle - Herstellung und Anwendungspotential [New Mn alloys PM steels-manufacturing and porential for application]. in „Pulvermetallurgie in Wissenschaft und Praxis Bd.30, Fachverband Pulvermetallurgie; 2014;235–254 (in German).
   Google Scholar
• Klein AN, Oberacker R, Thümmler F. Development of new high strength sintered steels containing silicon and manganese. Metal Powder Rep. 1984;39:335–338.
   Google Scholar
• Klein AN, Oberacker R, Thümmler F. High strength Si-Mn alloyed sintered steels. Mechanical properties. Powder Metall Int. 1985;17:13–16. 71-74.
   Web of Science ®Google Scholar
• Handbook of Chemistry and Physics, 67th Ed. Boca Raton (FL): CRC Press; 1985.
   Google Scholar
• Dautzenberg N, Dorweiler HJ. Dimensional behaviour of copper-carbon sintered steels. Powder Metall Int. 1985;17:279–283.
   Web of Science ®Google Scholar
• Danninger H, Pöttschacher R, Bradac S, et al. Comparison of Mn, Cr and Mo alloyed sintered steels prepared from elemental powders. Powder Metall. 2005;48:23–32.
   Web of Science ®Google Scholar
• Šalak A. Ferrous powder metallurgy. Cambridge: CISP; 1995.
   Google Scholar
• Jaliliziyaeian M. Sintering of manganese prealloyed powder metallurgy steels [PhD thesis]. TU Wien; 2008.
   Google Scholar
• Hryha E. Fundamental study of Mn containing PM steels with alloying method of both premix and pre-alloy [PhD thesis]. Slovak Academy of Sciences, Kosice; 2007.
   Google Scholar
• Hryha E, Nyborg L, Dudrova E, et al. Sintered steels alloyed with manganese: effect of alloying mode. Proc. PM2010 World Congress Florence, EPMA, Shrewsbury UK; 2010; Vol. 3; p. 87–94.
   Google Scholar
• Albano-Müller L, Thümmler F, Zapf G. High-strength sintered iron-base alloys by using transition metal carbides. Powder Metall. 1973;16:236–256.
   Web of Science ®Google Scholar
• Zapf G, Dalal K. Introduction of high oxygen affinity elements manganese, chromium and vanadium in the powder metallurgy of P/M parts. Modern Dev Powder Metall. 1977;10:129–152.
   Google Scholar
• Schlieper G, Thümmler F. High strength heat-treatable sintered steels containing manganese, chromium, vanadium and molybdenum. Powder Metall Int. 1979;11:172–176.
   Web of Science ®Google Scholar
• Banerjee S., Schlieper G, Thümmler F et al. New results in the master alloy concept for high strength sintered steels. Modern Dev Powder Metall. 1981;13:143–157.
   Google Scholar
• Castro F, Sarasola M, Sainz S, et al. Processing routes for obtaining novel high performance Mn-containing PM steels. Mater Sci Forum. 2007;524-526:705–708.
   Google Scholar
• De Oro Calderon R, Dunkley JJ, Gierl-Mayer C, et al. New opportunities for master alloys: ultra high pressure water atomized powders. Powder Metall Rev. 2019;8(1):55–66.
   Google Scholar
• De Oro Calderon R, Gierl-Mayer C, Danninger H. Master alloys in powder metallurgy: the challenge of exploring new alloying compositions. Powder Metall. 2017;60:86–96.
   Web of Science ®Google Scholar
• Gierl-Mayer C, Danninger H, de Oro Calderon R, et al. “Internal gettering” – metallothermic reduction processes in the early stage of sintering. Int J Powder Metall. 2015;51:47–53.
   Web of Science ®Google Scholar
• Sandner C, Dickinger J, Rößler H, et al. Advanced applications for sintered gears. Proc. PM2004 World Congress Vienna; H. Danninger, R. Ratzi eds., EPMA, Shrewsbury UK; 2004; Vol.5; 657–662.
   Google Scholar
• Gierl-Mayer C, Prokofyev M, Huemer M-C, et al. Powder metallurgy manufacturing of Hadfield-type Mn steels with TRIP behaviour, Proc. EuroPM2020 Virtual Congress, EPMA, Chantilly; 2020; paper no. 4849701.
   Google Scholar
• Ouda K, Danninger H, Gierl-Mayer C. Magnetic measurement of retained austenite in sintered steels – benefits and limitations. Powder Metall. 2018;61:358–368.
   Web of Science ®Google Scholar
• Gestrich T. In situ Charakterisierung der Vorgänge beim Entbindern, Ausgasen und Sintern von WC-Co-Hartmetallmischungen mittels Komplexer Thermischer Analyse [PhD thesis]. TU Dresden; 2004.
   Google Scholar
• Danninger H, Avakemian A, Gierl-Mayer C, et al. Methane formation through substrate-atmosphere interaction during sintering of si containing steels. Proc. EuroPM2014 Salzburg, EPMA, Shrewsbury; 2014; paper no. 14038.
   Google Scholar
• De Oro Calderon R, Gierl-Mayer C, Danninger H. Effect of H2 atmospheres on sintering of steels containing oxidation-sensitive elements introduced through the master-alloy route. Int J Powder Metall. 2017;53(3):31–40.
   Web of Science ®Google Scholar
• Jalilizyaeian M, Gierl C, Danninger H. Manganese evaporation during sintering of Fe-Mn-Cr compacts from prealloyed iron powders. Proc. Euro PM 2008 Mannheim, EPMA, Shrewsbury UK; 2008; Vol.1; 115-120.
   Google Scholar