Investigation on the hot-deformation behaviour of sintered and forged specimens to improve the forging safety of powder-forged products

References

• Jones P. The technical and economic advantages of powder-forged products. Powder Metall. 1970;13(26):114–129.
   Web of Science ®Google Scholar
• Brown G. The powder-forging process: a review of the basic concept and development prospects. Powder Metall. 1971;14(27):124–143.
   Web of Science ®Google Scholar
• Ilia E, O’Neill M, Tutton K, et al. Benchmarking the industry: powder forging makes a better connecting rod. SAE Trans. 2005: 340–352.
   Google Scholar
• Suzuki H, Sawayama T, Ilia E, et al. SAE Trans. 2006: 556–562.
   Google Scholar
• Wang S, Wang Q, Wang H, et al. Effects of copper content on microstructure and mechanical properties of powder-forged rod Fe-C-Cu alloys manufactured at elevated temperature. Mater Sci Eng A. 2019;743:197–206.
   Web of Science ®Google Scholar
• Ilia E, Plamondon P, Masse J-P, et al. L'espérance gilles, copper precipitation at engine operating temperatures in powder-forged connecting rods manufactured with Fe–Cu–C alloys. Mater Sci Eng A. 2019;767:138383.
   Web of Science ®Google Scholar
• Fischmeister H, Aren B, Easterling K. Deformation and densification of porous preforms in hot forging. Powder Metall. 1971;14(27):144–163.
   Web of Science ®Google Scholar
• Guest T, Negm M, Davies R. Metal flow and densification in the die-forging of porous preforms. Powder Metall. 1973;16(32):314–326.
   Web of Science ®Google Scholar
• Bockstiegel G, Björk U. The influence of preform shape on material flow, residual porosity, and occurrence of flaws in hot-forged powder compacts. Powder Metall. 1974;17(33):126–139.
   Web of Science ®Google Scholar
• Davies R, Negm M. The effects of some process variables on the As-forged properties of a powder-forged Ni-Mo alloy steel. Powder Metall. 1977;20(1):39–47.
   Web of Science ®Google Scholar
• Badawy A. Survey and recommendations on the selection of optimum powder forging temperature. J Mater Shaping Technol. 1988;6(1):31–40.
   Google Scholar
• Abdel-Rahman M, El-Sheikh M. Workability in forging of powder metallurgy compacts. J Mater Process Technol. 1995;54(1-4):97–102.
   Web of Science ®Google Scholar
• Cho J, Joo Y, Jeong H. The Al-powder forging process: its finite element analysis. J Mater Process Technol. 2001;111(1-3):204–209.
   Web of Science ®Google Scholar
• Huang C-C, Cheng J-H. Forging simulation of sintered powder compacts under various frictional conditions. Int J Mech Sci. 2002;44(3):489–507.
   Web of Science ®Google Scholar
• Li F, Chen P, Han J, et al. Metal flow behavior of P/M connecting rod preform in flashless forging based on isothermal compression and numerical simulation. J. Mater. Res. Technol. 2020;9(2):1200–1209.
   Google Scholar
• Li F, Yi J, Eckert J. Optimization of the Hot forging processing parameters for powder metallurgy Fe-Cu-C connecting rods based on finite element simulation. Metall. Mater. Trans. A. 2017;48(12):6027–6037.
   Web of Science ®Google Scholar
• Li F, Yi J, Eckert J. Deformation behavior of powder metallurgy connecting rod preform during Hot forging based on Hot compression and finite element method simulation. Metall. Mater. Trans. A. 2017;48(6):2971–2978.
   Google Scholar
• McQueen H, Yue S, Ryan N, et al. Hot working characteristics of steels in austenitic state. J Mater Process Technol. 1995;53(1-2):293–310.
   Web of Science ®Google Scholar
• Jonas JJ, Poliak EI. The critical strain for dynamic recrystallization in rolling mills. Mater Sci Forum. 2003: 57–66, Trans Tech Publ.
   Google Scholar
• Cai Z, Ji H, Pei W, et al. Hot workability, constitutive model and processing map of 3Cr23Ni8Mn3N heat resistant steel. Vacuum. 2019;165:324–336.
   Web of Science ®Google Scholar
• Liu G, Han Y, Shi Z, et al. Hot deformation and optimization of process parameters of an as-cast 6Mo superaustenitic stainless steel: a study with processing map. Mater Des. 2014;53:662–672.
   Web of Science ®Google Scholar
• Samantaray D, Mandal S, Bhaduri A. Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr–1Mo (P91) steel employing dynamic materials model. Mater Sci Eng A. 2011;528(15):5204–5211.
   Web of Science ®Google Scholar
• Prasad Y, Rao K, Sasidhar S. Hot working guide: a compendium of processing maps. Materials Park, Ohio: ASM international; 2015.
   Google Scholar
• Prasad Y, Rao K. Effect of homogenization on the hot deformation behavior of cast AZ31 magnesium alloy. Mater Des. 2009;30(9):3723–3730.
   Web of Science ®Google Scholar
• Ji G, Li F, Li Q, et al. Development and validation of a processing map for Aermet100 steel. Mater Sci Eng A. 2010;527(4-5):1165–1171.
   Web of Science ®Google Scholar
• Hendrickson A, Machmeier P, Smith D. Impact forging of sintered steel preforms. Powder Metall. 2000;43(4):327–344.
   Web of Science ®Google Scholar
• Reyes-Calderón F, Mejía I, Cabrera J. Hot deformation activation energy (QHW) of austenitic Fe–22Mn–1.5Al–1.5Si–0.4C TWIP steels microalloyed with Nb, V, and Ti. Mater Sci Eng A. 2013;562:46–52.
   Web of Science ®Google Scholar
• Brown G, Steed J. A comparison of the mechanical properties of some powder-forged and wrought steels. Powder Metall. 1974;17(33):157–177.
   Web of Science ®Google Scholar